Month: July 2021

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 1259224-00-4, name is tert-Butyl (1-(4-aminophenyl)cyclobutyl)carbamate, A new synthetic method of this compound is introduced below., Formula: C15H22N2O2

To the solution of 4,6-dichloro-5-iodopyrimidine (5.50 g, 20.00 mmol) (prepared according to the ref of Organic Letters; English; 11; 8; 2009; 1837 – 1840; ) in dioxane (100 mL) was slowly added the solution of tert-butyl l-(4-aminophenyl)cyclobutylcarbamate (5.2 g, 20.00 mmol) in dioxane (20 mL) and Et3N(5 ml). The reaction mixture was stirred at 80C for overnight, lc-ms indicated 4,6-dichloro-5-iodopyrimidine was completed consumed. After removed the excess solvents under the reduced pressure to get a residue, which was dissolved in Ethyl acetate (250 mL) and washed water and brine. The combined organic layer was dried over Na2S04 and then filtered, the filtrate was concentrated to give the crude product, which was further purified by flash chromatography to afford tert-butyl l-(4-(6-chloro-5-iodopyrimidin-4- ylamino)phenyl)cyclobutylcarbamate. (5.00 g 50% yield).LC/MS: (ESI+): 501 [M+l], 523 [M+Na].

The synthetic route of 1259224-00-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ARRAY BIOPHARMA INC.; GENENTECH, INC.; SKELTON, Nicholas; GRADL, Stefan; BLAKE, James F.; GRAHAM, James M.; GUNAWARDANA, Indrani W.; HENTEMANN, Martin; MARLOW, Allison L.; TANG, Tony P.; WO2013/78254; (2013); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Reference of 640-61-9,Some common heterocyclic compound, 640-61-9, name is N,4-Dimethylbenzenesulfonamide, molecular formula is C8H11NO2S, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Prepared according to the general procedures. 1) Tube reactorwith 4 static mixers, a 6 mL reactor volume and a residencetime of 3 min, 1.5 M NaOCl (aq) at 1 mL/min and 1 MN-benzylmethylamine in EtOAc at 1 mL/min. 2) CSTR with a reactor volume of 50 mL, and residence time of 25 min. 1.1 MNaOCl (aq) at 1 mL/min and 1 M N-benzylmethylamine intoluene at 1 mL/min were used. The product was isolated foreach reactor volume by separation of the organic phase for eachreactor volume of solution and removal of the solvent by rotaryevaporation to give a white solid (1 reactor volume gives666 mg, 3.0 mmol, quantitative yield). NMR data matches thatreported in the literature [37]. 1H NMR (CDCl3, 500 MHz) deltappm 7.82 (d, J = 8.4 Hz, 2H, CHAr), 7.42 (d, J = 8.4 Hz, 2H,CHAr), 3.09 (s, 3H, NCH3), 2.48 (s, 3H, Ar-CH3); 13C NMR(CDCl3, 125 MHz) delta ppm 145.75 (CAr), 129.80 (2CHAr),129.78 (2 CHAr), 128.28 (CAr), 45.51 (NCH3), 21.70 (ArCH3).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route N,4-Dimethylbenzenesulfonamide, its application will become more common.

Reference:
Article; Blacker, A. John; Jolley, Katherine E.; Beilstein Journal of Organic Chemistry; vol. 11; (2015); p. 2408 – 2417;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Application of 2564-07-0, The chemical industry reduces the impact on the environment during synthesis 2564-07-0, name is 2-Chloro-N-(2,3-dimethylphenyl)acetamide, I believe this compound will play a more active role in future production and life.

The procedure described in Example 8 was followed, substituting the product from Example 17A for N-chloroacetyl-3-nitroaniline, to provide the title compound (32% yield as a white solid. mp 124-126 C.; 1H NMR (300 MHz, DMSO-d6) ? 2.12 (s, 3H), 2.26 (s, 3H), 2.72 (m, 4H), 3.21 (s, 2H), 3.69 (m, 4H), 6.94 (dd, 1H, J=7.8, 4.8 Hz), 6.99 (br d, 1H, J=7.4 Hz), 7.07 (dd, 1H, J=7.4, 7.4 Hz), 7.45 (br d, 1H, J=7.8 Hz), 8.08 (dd, 1H, J=7.8, 2.0 Hz), 8.42 (dd, 1H, 4.8, 2.1 Hz), 9.42 (br s, 1H); MS (DCI/NH3) m/e 350 (M+H)+; Anal. calcd for C20H23N50.0.10H2O: C, 68.39; H, 6.66; N, 19.94. Found: C, 68.74; H, 6.58; N, 19.56.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Chloro-N-(2,3-dimethylphenyl)acetamide, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Stewart, Andrew O.; Kolasa, Teodozyj; US2003/232836; (2003); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Application of 7223-30-5, The chemical industry reduces the impact on the environment during synthesis 7223-30-5, name is 3-Phenylpropiolamide, I believe this compound will play a more active role in future production and life.

General procedure: A degassed solution of 3-phenylpropiolamide (5.0 mmol) and N,N-dimethylethane-1,2-diamine (5.0mmol) in DMF (6.0 mL) was added through canula to a degassed solution of thevinyl iodide (1.0 mmol), Cs2CO3 (5.0 mmol) and CuI (2.0mmol) in DMF (25.0 mL) at 23 C. After stirring for the indicated time, thereaction was quenched with water and extracted with EtOAc (x3). The combined organic layers were washedwith brine, dried over Na2SO4 and filtered. The solventwas concentrated under reduced pressure, and the residue was purified byflash chromatography as indicated.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-Phenylpropiolamide, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Garcia-Rodriguez, Jose; Mendiratta, Saurabh; White, Michael A.; Xie, Xiao-Song; De Brabander, Jef K.; Bioorganic and Medicinal Chemistry Letters; vol. 25; 20; (2015); p. 4393 – 4398;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Reference of 915087-25-1, The chemical industry reduces the impact on the environment during synthesis 915087-25-1, name is 4-Amino-2-fluoro-N-methylbenzamide, I believe this compound will play a more active role in future production and life.

Synthesis of 3,5-dideutero-4-amino-2-fluoro-N-methyl benzamide (compound 22) Into a suspension of compound 5 (1 g, 5.95 mmol) in heavy water (10 mL) concentrated hydrochloric acid (0.5 mL, 6.00 mmol) was added, thereby forming the heavy water solution of the hydrochloride salt of compound 5. The mixture was heated to 125 C. by microwave, and reacted for 30 min. Then the reaction solution was adjusted to alkaline with 1 M NaOH aqueous solution, and white solid precipitated. The solid was filtered and washed with water (20 mL*3), dried in an oven to give compound 22 as a white solid (0.80 g, 79.0% yield). 1H NMR (CDCl3, 400 MHz): delta (ppm) 7.92 (1H, d, J=8.8 Hz), 6.62 (1H, s), 4.10 (2H, s), 2.99 (3H, s).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4-Amino-2-fluoro-N-methylbenzamide, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; HC PHARMACEUTICAL CO., LTD.; Chen, Yuanwei; US2014/371284; (2014); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 513-74-6, name is Ammonium carbamodithioate, belongs to amides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 513-74-6, HPLC of Formula: CH6N2S2

Step 89.2: Ammonium dithiocarbamate (208 mg, 1.89 mmol) and 72 (X = Br) (200 mg, 0.63 mmol) in anhydrous MeOH (10 mL) was stirred for 10 mins. The resulting cream precipitate was collected by filtration, resuspended in acetic acid (10 mL) and refluxed for 1 hr. The reaction was cooled to room temperature and diluted with ice cold water. The resulting green precipitate was collected by filtration, redissolved in (CH2CI2:Me0H 95:5, 100 mL) and dried (Na2SO4). The pale green solution was concentrated in vacuo to give 4-(5-bromopyrazolo[1 ,5-a]pyridin-3-yl)thiazole-2(3/-/)-thione (73: X = Br) (136 mg, 70 percent) that is stored in the freezer. 1H NMR delta (400 MHz, d6-DMSO) 13.59 (br s, 1 H), 8.74 (d, J 7.3 Hz, 1H1), 8.51 ( s, 1 H ), 8.22 (d, J 1.8 Hz, 1H), 7.27 (s, 1 H1), 7.19 (dd, J 7.3, 2.1 Hz, 1 H). LCMS (APCI+) 312 (MH+ with 79Br, 100percent), 314 (MH+ with 81Br, 100percent).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, Ammonium carbamodithioate, and friends who are interested can also refer to it.

Reference:
Patent; AUCKLAND UNISERVICES LIMITED; WO2009/8748; (2009); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Electric Literature of 7160-22-7,Some common heterocyclic compound, 7160-22-7, name is N-(3,4-Dichlorophenyl)pivalamide, molecular formula is C11H13Cl2NO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

N-(3,4-dichlorophenyl)-2,2-dimethylpropanamide (121 g) was dissolved in 720 mL THF and the solution was cooled to -50 0C. Butyllithium (433 mL, 2.5N in hex) was added while keeping the internal temperature between -45 0C and -35 0C. (final temp.: -35 0C) and held at -25 0C for 40 min. An hplc check of the reaction mixture revealed that 5-10 % of the starting material remained. An additional 25 mL of butyllithium was added at -30 0C and the reaction was at -30 to – 25 0C for a further 30 min (HPLC: no significant change). The reaction mixture was cooled to -45 0C and SO2 was bubbled though the solution until saturation appeared to have been reached. Subsequently, the reaction mixture was at – 10 to 0 0C for 45 min. Argon (2 double -balloon volumes) was bubbled through the solution following which the reaction mixture was cooled to -5 0C. Sulfuryl chloride (58.8 mL) was added while keeping the temperature below 22 0C. The reaction mixture was kept at 10-15 0C for 1 h (HPLC: complete). EtOAc was added and the mixture was concentrated, washed with water, saturated aqueous sodium bicarbonate and brine, dried over MgStheta4 and the solvent was evaporated in vacuo. The crude material crystallized and was triturated with hot hexane. Yield: 87.2 g 1H-NMR (DMSOd6) delta 7.60(d, J= 8.4Hz, IH), 7.34(d, J= 8.4Hz, IH), 1.43(9H, s).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route N-(3,4-Dichlorophenyl)pivalamide, its application will become more common.

Reference:
Patent; SMITHKLINE BEECHAM CORPORATION; WO2007/124423; (2007); A2;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Application of 25625-57-4,Some common heterocyclic compound, 25625-57-4, name is 2-Bromo-N-(3-(trifluoromethyl)phenyl)acetamide, molecular formula is C9H7BrF3NO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 10a Chiral isomer 12-{3-[4-(4-methyl-1 H-imidazol-1 -yl)phenyl]-2-oxo-7-oxa-1 ,4-diazaspiro[4.5]dec-3-en-1 -yl}-N-[3-(trifluoromethyl)phenyl]acetamide hydrochloride 3-[4-(4-Methyl-1 H-imidazol-1 -yl)phenyl]-7-oxa-1 ,4-diazaspiro[4.5]dec-3-en-2-one (D31 a), isomer 1 (94mg) in DMF (6ml) was cooled to ice bath temp and treated with sodium hydride 60% in oil (13mg) under an atmosphere of argon. The mixture was stirred for 20 minutes when 2-bromo-N-[3-(trifluoromethyl)phenyl]acetamide (85mg) in DMF (2.5ml) was added over 1.5 hours by syringe pump. The mixture was then allowed to warm to room temp overnight. The solvent was partially removed and the residue was purified by low pH MDAP. The fractions were loaded onto SCX and the free base was eluted with 2M methanolic ammonia. The solvent was removed and the residue was dissolved in DCM, treated with HCI-Et2O, solvent removed and a white solid was obtained from ether (78mg).1H NMR (DMSO) delta: 1.75 (2H, m), 2.05-2.35 (obs, m), 2.45 (3H, s), 3.4-3.6 (obs, m), 3.9 (2H, m), 4.98 (2H, m), 7.45 (1 H, m), 7.58 (1 H, m), 7.75 (1 H, m), 7.98 (2H, m), 8.12 (2H, m), 8.58 (2H, m), 9.63 (1 H, s), 10.74 (1 H, s). 19F NMR (DMSO) delta: 61.4 Mass Spectrum (LC/MS): Found 512 (MH+). Ret. time 1.63 min.Example 10b Chiral isomer 2 2-{3-[4-(4-methyl-1 H-imidazol-1 -yl)phenyl]-2-oxo-7-oxa-1 ,4-diazaspiro[4.5]dec-3-en- 1-yl}-N-[3-(trifluoromethyl)phenyl]acetamide-‘J 3-[4-(4-Methyl-1 H-imidazol-1 -yl)phenyl]-7-oxa-1 ,4-diazaspiro[4.5]dec-3-en-2-one (D31 b), isomer 2 (94mg) in DMF (6ml) was cooled to ice bath temp and treated with sodium hydride 60% in oil (12mg) under an atmosphere of argon. The mixture was stirred for 20 minutes when 2-bromo-N-[3-(trifluoromethyl)phenyl]acetamide (85mg) in DMF (2.5ml) was added over 1.5 hours by syringe pump. The mixture was then allowed to warm to room temp overnight. The mixture was poured into water and extracted with dichloromethane. The organic layer was washed with brine and then dried with hydromatrix and the solvent was removed to give the title compound (104mg). 1H NMR (CDCI3) delta: 1.7 (obs, m), 2.0 (2H, m), 2.15-2.4 (2H, m), 3.31 (3H, m), 3.71 (1 H, m), 3.85 (2H, m), 4.05 (1 H, m), 4.45 (2H, m), 7.10 (1 H, s), 7.3-7.5 (4H, m), 7.68 (1 H, m), 7.84 (1 H, m), 7.94 (1 H, m), 8.60 (2H, m), 9.09 (1 H, s). 19F NMR (DMSO) delta: 62.7 Mass Spectrum (LC/MS): Found 512 (MH+). Ret. time 1.62 min.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2-Bromo-N-(3-(trifluoromethyl)phenyl)acetamide, its application will become more common.

Reference:
Patent; GLAXO GROUP LIMITED; WO2009/34061; (2009); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 4424-80-0, name is 4,5-Dihydro-1H-benzo[b]azepin-2(3H)-one, A new synthetic method of this compound is introduced below., Formula: C10H11NO

To a solution of 1B (4.89 g, 30 mmol) in acetic acid (90 mL) was added dropwise a solution of bromine (9.6 g, 60 mmol) in acetic acid (20 mL) over 15 min. The mixture was stirred at rt for 6 h, and the resulting precipitate was collected and washed with additional HOAc. The desired product was recrystallized from MeOH/H2O as an off-white solid (4.78 g, 66%). LC/MS m/z 240 (M+H)+.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Bristol-Myers Squibb Company; US2007/93470; (2007); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Some common heterocyclic compound, 123986-64-1, name is tert-Butyl 4-(hydroxymethyl)benzylcarbamate, molecular formula is C13H19NO3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. name: tert-Butyl 4-(hydroxymethyl)benzylcarbamate

Stage 3 – Preparation of te/t-butyl (4-formylbenzyl)carbamate; Stage 2 product (5.87g, 24.73mmol) was stirred in DCM (20OmL) with MnO2 (16.71g, 192.2mmol) for 16h at RT. The reaction was then filtered through celite and the solvent removed in vacuo to give the product as a yellow oil (4.63g, 80%). m/z = 258 [M+Na]

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 123986-64-1, its application will become more common.

Reference:
Patent; CHROMA THERAPEUTICS LTD.; WO2008/40934; (2008); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics