These common heterocyclic compound, 630-22-8, name is 2,2-Dimethylpropanethioamide, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Safety of 2,2-Dimethylpropanethioamide
Step C: N-{3-[5-(2-chloro-4-pyrimidinyl)-2-(l, l-dimethylethyl)-l,3-thiazol-4-yl]- 2-fluorophenyl}-2,6-difluorobenzenesulfonamide To a reactor vessel was charged N-{3-[(2-chloro-4-pyrimidinyl)acetyl]-2- fluorophenyl}-2,6-difluorobenzenesulfonamide (30 g, 1 eq) followed by dichloromethane (300 mL). The reaction slurry was cooled to ~10C and N-bromosuccinimide (“NBS”) (12.09 g, 1 eq) was added in 3 approximately equal portions, stirring for 10-15 minutes between each addition. After the final addition of NBS, the reaction mixture was warmed to ~20C and stirred for 45 min . Water (5 vol) was then added to the reaction vessel and the mixture was stirred and then the layers separated. Water (5 vol) was again added to the dichloromethane layer and the mixture was stirred and the layers separated. The dichloromethane layers were concentrated to -120 mL. Ethyl acetate (7 vol) was added to the reaction mixture and concentrated to -120 mL. Dimethylacetamide (270 mL) was then added to the reaction mixture and cooled to ~10C. 2,2-Dimethylpropanethioamide (1.3 g, 0.5 eq) in 2 equal portions was added to the reactor contents with stirring for ~5 minutes between additions. The reaction was warmed to 20-25 C. After 45 min, the vessel contents were heated to 75C and held for 1.75 hours . The reaction mixture was then cooled to 5C and water (270 ml) was slowly charged keeping the temperature below 30C. Ethyl acetate (4 vol) was then charged and the mixture was stirred and layers separated. Ethyl acetate (7 vol) was again charged to the aqueous layer and the contents were stirred and separated. Ethyl acetate (7 vol) was charged again to the aqueous layer and the contents were stirred and separated. The organic layers were combined and washed with water (4 vol) 4 times and stirred overnight at 20-25C. The organic layers were then concentrated under heat and vacuum to 120 mL. The vessel contents were then heated to 50C and heptanes (120 mL) were added slowly. After addition of heptanes, the vessel contents were heated to reflux then cooled to 0C and held for ~2 hrs. The solids were filtered and rinsed with heptanes (2 x 2 vol). The solid product was then dried under vacuum at 30C to obtain N-{3-[5-(2-chloro-4-pyrimidinyl)-2-(l, l-dimethylethyl)-l,3- thiazol-4-yl]-2-fluorophenyl}-2,6-difluorobenzenesulfonamide (28.8 g, 80%).
The synthetic route of 2,2-Dimethylpropanethioamide has been constantly updated, and we look forward to future research findings.
Reference:
Patent; GLAXOSMITHKLINE INTELLECTUAL PROPERTY (NO.2) LIMITED; GRESHOCK, Joel David; HOOS, Axel; WO2015/87279; (2015); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics