Author: Jessica.F

These common heterocyclic compound, 4815-28-5, name is 2-Amino-4,5,6,7-tetrahydro-1-benzothiophene-3-carboxamide, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Quality Control of 2-Amino-4,5,6,7-tetrahydro-1-benzothiophene-3-carboxamide

To a stirred solution of the appropriate aminothiophene (1 equiv. ) in 1,4-dioxane (5ml per mmol of aminothiophene) was added the appropriate acyl chloride (1.2 equiv. ). The reaction mixture was stirred at room temperature for 17 hours and then diluted with ether or hexane. The resultant precipitate was removed by filtration, washed with ether and air- dried to give the desired product. Compound No. 390 of Table 14 Using the additional general procedure 2- (2-chloroacetylamino)-4, 5,6, 7-tetrahydro- benzo [b] thiophene-3-carboxylic acid amide (Compound No. 390 of Table 14) was obtained from aminothiophene WO as an off-white solid in 52% yield. m. p. 242-245C (dec.).

The synthetic route of 2-Amino-4,5,6,7-tetrahydro-1-benzothiophene-3-carboxamide has been constantly updated, and we look forward to future research findings.

Reference:
Patent; SYNGENTA PARTICIPATIONS AG; SYNGENTA LIMITED; WO2005/44008; (2005); A2;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Related Products of 146651-75-4, A common heterocyclic compound, 146651-75-4, name is tert-Butyl (2-aminophenyl)carbamate, molecular formula is C11H16N2O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step 1: tert-Butyl 2-(6-chloronicotinamido)phenylcarbamate (94)To solution of (2-amino-phenyl)-carbamic acid tert-butyl ester (22) (Seto, C. T.; Mathias, J. P.; Whitesides, G. M.; J. Amer. Chem. Soc., (1993), 115, 1321-1329.) (1.56 g, 7.49 mmol) in MeCN (40 mL) is added triethylamine (2.60 mL, 18.7 mmol) and 6-chloronicotinic acid (1.42 g 8.99 mmol). The mixture is stirred for 18 h at r.t. Upon completion of the reaction, the solvent is removed in vacuo and the residue is partitioned between EtOAc and an NH4Cl solution. The organic phase is collected and the aqueous layer is then extracted with EtOAc; the combined organic layers are washed with brine, dried over MgSO4 and evaporated. The residue is purified by flash chromatography using EtOAc/Hexane (a gradient of 20:80 to 50:50) as an eluent, to afford the title compound 94 (2.39 g, 92% yield). 1H NMR (DMSO-d6) delta (ppm): 10.01 (s, 1H), 8.96 (d, J=2.0 Hz, 1H), 8.71 (s, 1H), 8.35 (dd, J=8.4, 2.4 Hz, 1H), 7.73 (d, J=8.0 Hz, 1H), 7.62 (d, J=8.0 Hz, 1H), 7.48 (d, J=7.6 Hz, 1H), 7.22 (td, J=7.8, 1.4 Hz, 1H), 7.13 (t, J=7.6 Hz, 1H), 1.44 (s, 9H). LRMS (ESI): (calc) 347.10 (found) 370.1 (M+Na+).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; METHYLGENE INC.; US2008/227826; (2008); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Some common heterocyclic compound, 3984-14-3, name is N,N-Dimethylsulfamide, molecular formula is C2H8N2O2S, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. name: N,N-Dimethylsulfamide

1H-Indole-6-carboxamide, 2-bromo-3-cyclohexyl-N-[(dimethylamino)sulfonyl]-.; 1,1′-Carbonyldiimidazole (1.17 g, 7.2 mmol) was added to a stirred solution of 2-bromo-3-cyclohexyl-1H-indole-6-carboxylic acid (2.03 g, 6.3 mmol) in THF (6 mL) at 22 C. The evolution of CO2 was instantaneous and when it slowed the solution was heated at 50 C. for 1 hr and then cooled to 22 C. N,N-Dimethylsulfamide (0.94 g, 7.56 mmol) was added followed by the dropwise addition of a solution of DBU (1.34 g, 8.8 mmol) in THF (4 mL). Stirring was continued for 24 hr. The mixture was partitioned between ethyl acetate and dilute HCl. The ethyl acetate layer was washed with water followed by brine and dried over Na2SO4. The extract was concentrated to dryness to leave the title product as a pale yellow friable foam, (2.0 g, 74%, >90% purity, estimated from NMR). 1H NMR (300 MHz, DMSO-D6) delta ppm 1.28-1.49 (m, 3 H) 1.59-2.04 (m, 7 H) 2.74-2.82 (m, 1 H) 2.88 (s, 6 H) 7.57 (dd, J=8.42, 1.46 Hz, 1 H) 7.74 (d, J=8.78 Hz, 1 H) 7.91 (s, 1 H) 11.71 (s, 1 H) 12.08 (s, 1 H).; An alternative method for the preparation of 1H-indole-6-carboxamide, 2-bromo-3-cyclohexyl-N-[(dimethylamino)sulfonyl]- is described below.; To a 1 L four necked round bottom flask equipped with a mechanical stirrer, a temperature controller, a N2 inlet, and a condenser, under N2, was added 2-bromo-3-cyclohexyl-1H-indole-6-carboxylic acid (102.0 g, 0.259 mol) and dry THF (300 mL). After stirring for 10 min, CDI (50.3 g, 0.31 mol) was added portion wise. The reaction mixture was then heated to 50 oC for 2 h. After cooling to 30 oC, N,N-dimethylaminosulfonamide (41.7 g, 0.336 mol) was added in one portion followed by addition of DBU (54.1 mL, 0.362 mol) drop wise over a period of 1 h. The reaction mixture was then stirred at rt for 20 h. The solvent was removed in vacuo and the residue was partitioned between EtOAc and 1 N HCl (1:1, 2 L). The organic layer was separated and the aqueous layer was extracted with EtOAc (500 mL). The combined organic layers were washed with brine (1.5 L) and dried over MgSO4. The solution was filtered and concentrated in vacuo to give the crude product (111.0 g). The crude product was suspended in EtOAc (400 mL) at 60 oC. To the suspension was added heptane (2 L) slowly. The resulting suspension was stirred and cooled to 0 oC. It was then filtered. The filter cake was rinsed with small amount of heptane and house vacuum air dried for 2 days. The product was collected as a white solid (92.0 g, 83%). 1H NMR (MeOD, 300 MHz) delta 7.89 (s, H), 7.77 (d, J=8.4 Hz, 1H), 7.55 (dd, J=8.4 and 1.8 Hz, 1H), 3.01 (s, 6H), 2.73-2.95 (m, 1H), 1.81-2.05 (m, 8H), 1.39-1.50 (m, 2H); m/z 429 (M+H)+.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 3984-14-3, its application will become more common.

Reference:
Patent; Bristol-Myers Squibb Company; US2008/188458; (2008); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

These common heterocyclic compound, 16066-84-5, name is tert-Butyl methylcarbamate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. SDS of cas: 16066-84-5

Example 25 2′-(2,6-difluoro-3,5-dimethoxyphenyl)-6′-(methylamino)-1′,2′-dihydro-3’H-spiro[cyclopropane-1,4′-[2,7]naphthyridin]-3′-one To a stirred solution of 6′-chloro-2′-(2,6-difluoro-3,5-dimethoxyphenyl)-1′,2′-dihydro-3’H-spiro[cyclopropane-1,4′-[2,7]naphthyridin]-3′-one (Example 23, Step 6: 90.0 mg, 0.236 mmol) and tert-butyl methylcarbamate (89.5 mg, 0.682 mmol) in 1,4-dioxane (3 mL) were added sequentially dicyclohexyl(2′,4′,6′-triisopropyl-3,6-dimethoxybiphenyl-2-yl)phosphine (BrettPhos, Aldrich, catNo.718742: 24.4 mg, 0.0455 mmol), sodium tert-butoxide (52.4 mg, 0.546 mmol), and palladium acetate (10.2 mg, 0.0455 mmol) at room temperature. The resulting mixture was purged with N2 and heated to 90 C. After stirring for 45 minutes at 90 C., the reaction mixture was cooled to ambient temperature and the volatiles were removed in vacuo. The residue was dissolved in DCM (1 mL) then TFA (1 mL) was added. After stirring at room temperature for 1 hour, the reaction mixture was concentrated and the crude was purified on RP-HPLC (XBridge C18 column, eluting with a gradient of acetonitrile/water containing 0.05% TFA, at flow rate of 60 mL/min) to give the desired product (32 mg) as its TFA salt. LC-MS calculated for C19H20F2N3O3 [M+H]+ m/z: 376.1. found 376.2. 1H NMR (500 MHz, DMSO-d6): delta 7.90 (s, 1H), 7.07 (t, J=10.0 Hz, 1H), 6.46 (s, 1H), 4.80 (s, 2H), 3.89 (s, 6H),), 2.90 (s, 3H) 1.79 (dd, J=10.0 Hz, 5.0 Hz, 2H), 1.56 (dd, J=10.0 Hz, 5.0 Hz, 2H) ppm.

The synthetic route of tert-Butyl methylcarbamate has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Sun, Yaping; Lu, Liang; Yao, Wenqing; Zhuo, Jincong; Wu, Liangxing; Xu, Meizhong; Qian, Ding-Quan; He, Chunhong; Zhang, Fenglei; US2014/315902; (2014); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 617-36-7, name is Ethyl 2-amino-2-oxoacetate, This compound has unique chemical properties. The synthetic route is as follows., Formula: C4H7NO3

In a flame dried round-bottomed flask equipped with a magnetic stir bar and under inert atmosphere (N2), a solution of commercially available oxalamic acid ethyl ester (43.429 g, 370.86 mmol) and Lawesson’s reagent (150.00 g, 370.86 mmol) in toluene (550.0 mL) was stirred at 80 0C for 2 h. The resulting mixture was cooled to rt and CH2CI2 (300 mL) was added. The mixture was filtered and the solvents were removed under reduced pressure. Purification of the residue by FC (CH2CI2) gave the title compound as an orange solid.

According to the analysis of related databases, 617-36-7, the application of this compound in the production field has become more and more popular.

Reference:
Patent; ACTELION PHARMACEUTICALS LTD; WO2009/77990; (2009); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Reference of 316146-27-7, The chemical industry reduces the impact on the environment during synthesis 316146-27-7, name is N-(4-Bromophenyl)-3-phenylpropanamide, I believe this compound will play a more active role in future production and life.

b) Preparation of intermediate 11; The reaction was carried out twice. POCl3 (1.225 mol) was added dropwise at 10¡ãC to DMF (0.525 mol). Then intermediate 10 (0.175 mol) was added at room temperature. The mixture was stirred overnight at 8O0C, poured out on ice and extracted with CH2CI2. The organic layer was dried (MgSO4), filtered, and the solvent was evaporated. Yield: 77.62 g of intermediate 11 (67percent).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, N-(4-Bromophenyl)-3-phenylpropanamide, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; JANSSEN PHARMACEUTICA N.V.; WO2007/435; (2007); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Related Products of 360-64-5, The chemical industry reduces the impact on the environment during synthesis 360-64-5, name is 2-(Trifluoromethyl)benzamide, I believe this compound will play a more active role in future production and life.

General procedure: Benzamides 2 (6 mmol) was dissolved in dry THF (20 mL) andthereto was added P2S5 (6 mmol) and heated at 65 C for 3 h, afterwhich the reaction mixture was cooled, poured in NaHCO3 (10%,100 mL), stirred for half an hour, then the resulting solid wasfiltered, dried and recrystallized from ethyl acetate to get compounds3.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-(Trifluoromethyl)benzamide, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Yan, Zhongzhong; Liu, Aiping; Huang, Mingzhi; Liu, Minhua; Pei, Hui; Huang, Lu; Yi, Haibo; Liu, Weidong; Hu, Aixi; European Journal of Medicinal Chemistry; vol. 149; (2018); p. 170 – 181;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 456-64-4, name is 1,1,1-Trifluoro-N-phenylmethanesulfonamide, This compound has unique chemical properties. The synthetic route is as follows., Recommanded Product: 1,1,1-Trifluoro-N-phenylmethanesulfonamide

6- (3-METHOXYPHENYL)-2- (2-MORPHOLIN-4-YL-2-OXOETHYL)-3-HYDROPYRIMIDIN-4-ONE 8 (leq) is dissolved in CH2CL2 in a round bottom flask, oven dried and kept under N2. Triethylamine is added (1.4 eq) followed by N-Phenyl trifluoromethanesulfonimide (1.2 eq) and DMAP (10 mol%). The reaction mixture is stirred at room temperature overnight. The solvent is evaporated under reduced pressure and the residue purified by chromatography on silicagel (ethyl acetate/hexanes 1: 5), obtaining the desired 6- (3-METHOXYPHENYL)-2- (2-MORPHOLIN-4-YL-2-OXOETHYL) pyrimidin-4-yl (trifluoromethyl) sulfonate 9.

According to the analysis of related databases, 456-64-4, the application of this compound in the production field has become more and more popular.

Reference:
Patent; CHIRON CORPORATION; WO2004/48365; (2004); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 147356-78-3, name is N-Methoxy-N-methylcyclopropanecarboxamide, This compound has unique chemical properties. The synthetic route is as follows., category: amides-buliding-blocks

Isopropylmagnesium chloride (2.0 M in THF, 2.0 mL, 3.97 mmol) was added to a solution of 2- bromo-7-fluoro-5-(l-methylpyrazol-4-yl)-6,7-dihydro-5H-pyrrolo[l,2-b][l,2,4]triazole (0.379 g, 1.32 mmol) and N-methoxy-N-methylcyclopropanecarboxamide (0.529 g, 3.97 mmol) in THF (13.2 mL) at 0C. After 5 min, the reaction was warmed to rt and stirred for an additional lh. Water was added and the reaction was diluted with isopropyl acetate. Brine was added and the aqueous layer was extracted with isopropyl acetate (4 x 50 mL). The combined organic layers were dried with sodium sulfate, concentrated and the crude residue was purified by prep SFC to afford arbitrarily assigned cyclopropyl((5S,7S)-7-fluoro-5-(l -methyl- lH-pyrazol-4-yl)-6,7-dihydro-5H-pyrrolo[ 1 ,2- b] [l ,2,4]triazol-2-yl)methanone (44.23 mg, 0.161 mmol, 12% yield). NMR (400 MHz, DMSO-d6) delta 7.80 (d, J = 0.8 Hz, 1H), 7.48 (d, J = 0.8 Hz, 1H), 6.21 (ddd, J= 56.4, 7.0, 2.4 Hz, 1H), 5.66 (ddd, J = 8.2, 6.0, 3.6 Hz, 1 H), 3.81 (s, 3H), 3.73 – 3.55 (m, 1H), 2.99 {XX, J = 7.5, 4.9 Hz, 1H), 2.80 (dddd, J = 26 A, 14.9, 3.7, 2.4 Hz, 1H), 1.14 – 0.95 (m, 4H). LCMS RT = 3.10 min, m/z = 276.1 [M + H]+. Prep SFC Information: Column: Whelko-01 5 muiotaeta, (150 x 21.2 mm), Mobile Phase: Carbon Dioxide (A) / 0.1 % Ammonium Hydroxide in Methanol (B), Elution Program Isocratic: 35% B Flow Rate: 70 mL/min, Column Temperature: 40 C, Wavelength: 220 nm.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 147356-78-3.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; GENENTECH, INC.; PATEL, Snahel; HAMILTON, Gregory; ZHAO, Guiling; CHEN, Huifen; DANIELS, Blake; STIVALA, Craig; (358 pag.)WO2019/12063; (2019); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Synthetic Route of 513-74-6,Some common heterocyclic compound, 513-74-6, name is Ammonium carbamodithioate, molecular formula is CH6N2S2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

0.69g Ammonium dithiocarbamate were dissolved in 10ml MeOH and 1.47g 4-(2- bromoacetyl)-1-methylpyridinium bromide were added. After 2h at ambient temperature the mixture was refluxed. After cooling the precipitate was filtered, washed with MeOH and dried. Yield: 0.15g 1H-NMR (DMSO-d6) delta 4.32(s, 3H), 8.32(s, 1 H), 8.45(d,2H; J=6.9Hz), 9.08(d,2H; J=6.8Hz), 14.1 (br s, 1 H) 13C-NMR (DMSO-c/6) delta 47.3, 121.6, 122.5, 136.6, 141.3, 145.9, 190.2

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route Ammonium carbamodithioate, its application will become more common.

Reference:
Patent; SANDOZ AG; KREMMINGER, Peter; STURM, Hubert; WO2013/34718; (2013); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics