Category: amides-buliding-blocks

6292-59-7, name is 4-(tert-Butyl)benzenesulfonamide, belongs to amides-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Product Details of 6292-59-7

A solution of compound 13 (2.0 g, 4.36 mmol) and commercially available4-tert-butylbenzenesulfoamide (1.0 g, 4.79 mmol) in toluene (30 mL) was treated withK2CO3 (723 mg, 5.23 mmol) and tetra-n-butylammonium bromide (142 mg,0.44 mmol). The reaction mixture was warmed at 100 C for 18 h and cooled downto ambient temperature. The resulting mixture was filtered through a pad of Celite,and the filtrate was diluted with EtOAc (100 mL); washed with aqueous 1N HCl,water, and brine; dried over anhydrous MgSO4; and concentrated under reducedpressure to provide the crude product. Flash chromatography (SiO2, 3percent MeOH?CH2Cl2) to provide 14 as a green foam (1.75 g, 63percent)

The synthetic route of 6292-59-7 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Lee, Chung Ryul; Lee, Sang Yeul; Nam, Tae-Gyu; Synthetic Communications; vol. 44; 17; (2014); p. 2488 – 2493;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 122334-37-6, name is 4-Chloro-N-methoxy-N-methylbenzamide, A new synthetic method of this compound is introduced below., Application In Synthesis of 4-Chloro-N-methoxy-N-methylbenzamide

Ethylmagnesium bromide (3.0 M in diethyl ether, 21.5 mL, 64.4 mmol) was added via syringe over a period of several minutes in an ice bath under nitrogen atmosphere to a solution of 5-bromo-1-methyl-1H-imidazole G, 64.4 mmol). A white precipitate was formed upon addition. The mixture was removed from the ice bath, stirred for 20 min and then cooled again in an ice bath before addition of 4-chloro-N-methoxy-N-methylbenzamide (10.7 g, 53.6 mmol, intermediate 1: step a) . The resulting white suspension was stirred at room temperature overnight. The reaction was quenched by the addition of a saturated aqueous NH4Cl solution and diluted with water. The mixture was partially concentrated, the THF was removed and diluted with DCM. The mixture was acidified to pH 1 with 1 N HCl aqueous solution and then neutralized with saturated aqueous NaHCO3 solution. The phases were separated and the aqueous phase further extracted with DCM. The organic extracts were washed with water, then dried (Na2SO4), filtered and concentrated to give a white solid. The crude product was triturated with a mixture of EtOAc: heptane (1: 1, 150 mL). The precipitated solid was collected by vacuum filtration and washed with heptane to give the title compound.

The synthetic route of 122334-37-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Janssen Pharmaceutica, N.V; Leonardo, Christie.A; Barubay, Kent; Edward, James P.; Kirsten, Kevin D.; Kumar, David A.; Maharupe, Uma; Nishimura, Rachel; Urbanski, Modu; Venkatesan, Hariharan; Wang, Ai Hua; OhLynn, Ronald L.; Woods, Craig R.; Fourier, Anne; Shu, Jia Hu; Cummings, Maxwell D.; (50 pag.)KR2016/70823; (2016); A;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

25625-57-4, name is 2-Bromo-N-(3-(trifluoromethyl)phenyl)acetamide, belongs to amides-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Application In Synthesis of 2-Bromo-N-(3-(trifluoromethyl)phenyl)acetamide

Sodium hydride in mineral oil (21.40 mg, 0.535 mmol) was added to a, stirring, ice-bath cooled solution of 3-[4-(4,5-dimethyl-1 H-imidazol-1 -yl)phenyl]-1 , 4-diazaspiro[4.4]non-3- en-2-one (D28) (150 mg, 0.486 mmol) in DMF (5 ml) under argon. After stirring for 30 min. a solution of 2-bromo-N-[3-(trifluoromethyl)phenyl]acetamide (D8) (137 mg) in DMF (3 ml) was added over 1 h using a syringe pump maintaining an ice-bath temperature. The resulting reaction mixture was allowed to come to room temperature then stirred for a further 4 h. The reation mixture was diluted with methanol (20 ml) and applied to an SCX column (1Og). After washing with MeOH (50 ml) the product was eluted with 2M NH3-MeOH. Evaporation of the solvent afforded a brown gum. On dissolving in 1 :1MeOH:DMSO for MDAP purification a small amount of white solid precipitated. This was collected, washed with diethyl ether and dried The material was reapplied to an SCX column (1g) in MeOH (10 ml), washing (30 ml MeOH) and eluting as described above to remove residual DMSO. Drying afforded the free-base of the title compound as a white solid (20 mg).1H NMR (CDCI3) delta: 1.80 – 2.15 (8H, bm), 2.17 (3H, s, overlapping with adjacent bm), 2.25 (3H, s), 4.30 (2H, s), 7.40 (4H, m), 7.58 (1 H, s), 7.68 (1 H, d), 7.84 (1 H, s), 8.57 (2H, d),9.32 (1 H, s).Mass Spectrum (Electrospray LC/MS): Found 510 (MH+). C27H26F3N5O3 requires 509. Ret. time 1.81 min.A solution of the free-base (20 mg) in DCM (2 ml) was treated with an excess of 1 M HCI in diethyl ether (0.12 ml, 0.120 mmol). The volatiles were removed in vacuo and the residue dried under high vacuum at 550C to afford the title hydrochloride as a pale yellow solid (20 mg).Mass Spectrum (Electrospray LC/MS): Found 510 (MH+). C27H26F3N5O3 requires 509. Ret. time 1.77 min.

The synthetic route of 25625-57-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; GLAXO GROUP LIMITED; WO2009/34061; (2009); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 2832-19-1, name is 2-Chloro-N-(hydroxymethyl)acetamide belongs to amides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. Application In Synthesis of 2-Chloro-N-(hydroxymethyl)acetamide

The starting material was prepared as follows: 2-Chloro-N-(hydroxymethyl)-acetamide (0.342 g; 2.7 mmol), triphenylphosphine (1.1 g; 4.19 mmol) and DEAD (0.6 ml; 4.19 mmol) were added to a solution of N-acetyl-colchicinol (0.3 g; 0.84 mmol) in dichloromethane (20 ml) under argon atmosphere. The mixture was stirred at ambient temperature for 2 hours, evaporated and purified by flash chromatography eluding with ethyl acetate/dichloromethane (50/50) and dichloromethane/methanol (98/2) to give (1). Yield: 76 % MS-ESI: 485.1 [MH]+

The synthetic route of 2832-19-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Angiogene Pharmaceuticals Ltd; EP1140745; (2003); B1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Reference of 1171331-39-7, The chemical industry reduces the impact on the environment during synthesis 1171331-39-7, name is 2-Amino-N-(2,2,2-trifluoroethyl)acetamide hydrochloride, I believe this compound will play a more active role in future production and life.

Example 108 Preparation of (Z)-2-Bromo-N-(2-oxo-2-((2,2,2-trifluoroethyl)amino)ethyl)-4-(4,4,4-trifluoro-3-(3,4,5-trichlorophenyl)but-1-en-1-yl)benzamide (AC95) To a stirred solution of (Z)-2-bromo-4-(4,4,4-trifluoro-3-(3,4,5-trichlorophenyl)but-1-en-1-yl)benzoic acid (200 mg, 0.41 mmol) in anhydrous THF (5.0 mL) was added carbonyldiimidazole (82 mg, 0.51 mmol). The mixture was heated in a 50 C. oil bath for 1.5 h, treated with 2-amino-N-(2,2,2-trifluoroethyl)acetamide hydrochloride (109 mg, 0.057 mmol) and the resulting mixture heated to reflux for 8 h. After cooling to ambient temperature, the mixture was taken up in Et2O and washed twice with aqueous 5% sodium bisulfate (NaHSO4) (2*) and once with saturated NaCl (1*). After dying over MgSO4, concentration in vacuo and purification by medium pressure chromatography on silica with EtOAc/Hexanes as the eluents, the title compound was obtained as a white foam (160 mg, 41%) mp 48-61 C.: 1H NMR (400 MHz, CDCl3) delta 7.58 (d, J=7.9 Hz, 1H), 7.44-7.29 (m, 3H), 7.14 (dd, J=7.9, 1.6 Hz, 1H), 6.86 (d, J=11.4 Hz, 1H), 6.76 (t, J=5.9 Hz, 1H), 6.59 (br s, 1H), 6.21-6.04 (m, 1H), 4.23 (d, J=5.5 Hz, 1H), 3.98 (qd, J=9.0, 6.5 Hz, 2H); 19F NMR (376 MHz, CDCl3) delta -69.31, -72.3; EIMS m/z 626.9 ([M+1]+).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Amino-N-(2,2,2-trifluoroethyl)acetamide hydrochloride, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Dow AgroSciences LLC; Lo, William C.; Hunter, James E.; Watson, Gerald B.; Patny, Akshay; Iyer, Pravin S.; Boruwa, Joshodeep; US2014/171314; (2014); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Reference of 96-30-0, A common heterocyclic compound, 96-30-0, name is 2-Chloro-N-methylacetamide, molecular formula is C3H6ClNO, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A suspension of Intermediate 7 (500 mg, 1.48 mmol), K2C03 (204 mg, 1.48 mmol) and potassium thioacetate (590 mg, 5.16 mmol) in DMF (5.5 mL) was heated at 140C under microwave irradiation for 3 h. After cooling, the mixture was dissolved in water (20 mL), neutralized to pH 6 with 1M HCl and extracted with EtOAc (3 x 50 mL). The organic layer was washed with saturated brine (3 x 30 mL), dried (MgS04) and concentrated in vacuo. Purification by column chromatography on silica, eluting with 5% EtOAc in DCM, gave a yellow solid (127 mg, 26%). LCMS (ES+) 337 (M+H)+. A suspension of this solid (114 mg, 0.339 mmol), K2C03 (46.8 mg, 0.339 mmol) and 2- chloro-N-methylacetamide (87 mg, 0.809 mmol) in DMF (3 mL) was heated at 120C under microwave irradiation for 1 h. After cooling, the mixture was dissolved in a 1 : 1 mixture of EtOAc and Et20 (150 mL) and washed with saturated brine (3 x 30 mL). The organic layer was dried (MgS04) and concentrated in vacuo. Purification by column chromatography on silica, eluting with 40% EtOAc in DCM, gave a white solid (119 mg, 86%). LCMS (ES+) 408 (M+H)+. This solid (119 mg, 0.292 mmol) was dissolved in DCM (7.6 mL) and TFA (1.33 mL) was added. The reaction mixture was stirred at r.t. for 1.5 h and concentrated in vacuo. The residue obtained was basified with 0.8M aqueous NaOH (8 mL) and extracted with EtOAc (3 x 30 mL). The combined organic layers were dried (MgS04) and concentrated in vacuo to give a colourless glass (117 mg, 100%). LCMS (ES+) 308 (M+H)+. A solution of this material (117 mg, 0.292 mmol), 2,4-dichloro-5-cyanopyrimidine (76.2 mg, 0.438 mmol) and DIPEA (0.20 mL, 1.168 mmol) in THF (2 mL) was stirred at r.t. for 4 h. The mixture was dissolved in EtOAc (150 mL) and washed with saturated brine (3 x 30 mL). The organic layer was dried (MgS04) and concentrated in vacuo. Purification by column chromatography on silica, eluting with DCM/MeOH NH3 solution in MeOH (98: 1 :1), gave a pale brown foam (105 mg, 81%). LCMS (ES+) 445, 447 (M+H)+ (mixture of regioisomers). A solution of this material (105 mg, 0.236 mmol) in a mixture of 7M NH3 solution in MeOH (2 mL) and NH4OH (1 mL) was heated at 120C under microwave irradiation for 1 h. After cooling, the mixture was dissolved in saturated brine (40 mL) and extracted with EtOAc (3 x 100 mL). The organic layer was dried (MgS04) and concentrated in vacuo. Purification by preparative HPLC afforded the title compound (13.2 mg, 13%) as an off-white solid, delta? (DMSO-d6) 8.31 (1H, s), 8.25 (1H, s), 8.15 (1H, d, J5.33 Hz), 7.87-7.81 (2H, m), 7.40 (1H, t, J9.13 Hz), 7.15 (1H, br s), 6.97 (1H, br s), 5.55-5.46 (1H, m), 4.10 (1H, d, J 15.2 Hz), 4.04 (1H, d, J 15.2 Hz), 2.65 (3H, d, J4.59 Hz), 2.58 (3H, s), 1.61 (3H, d, J 6.82 Hz). LCMS (ES+) 426 (M+H)+, T 3.37 minutes {Method 1).

The synthetic route of 96-30-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; UCB PHARMA S.A.; RAPHY, Gilles; BUeRLI, Roland; HAUGHAN, Alan, Findlay; WO2011/58113; (2011); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 1065114-27-3, name is tert-Butyl 2,4-dichloro-8,9-dihydro-5H-pyrimido[4,5-d]azepine-7(6H)-carboxylate, belongs to amides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 1065114-27-3, SDS of cas: 1065114-27-3

2,4-Dichloro-6,7,8,9-tetrahydro-5H-pyrimido[4,5-d]azepine hydrochloride (4.79 g, 18.4 mmol) was suspended in dichloromethane (50 mL), and the suspension was mixed with di-tert-butyl dicarbonate (6.0 g) and triethylamine (7.7 mL), followed by stirring at room temperature for thirty minutes. The reaction mixture was mixed with a saturated aqueous sodium bicarbonate solution, was stirred for a while and was separated. The organic layer was washed with brine and was dried over anhydrous sodium sulfate. After distilling off the solvent, the whole quantity of the residue was dissolved in tetrahydrofuran (50 mL), and the solution was mixed with 2 , 4-dichlorobenzylamine (4.2 mL) and triethylamine (11.5 mL), followed by stirring at 40C for 21 . 5 hours. The reaction mixture was diluted with water and was extracted with ethyl acetate. The organic layer was washed with brine, was dried over anhydrous sodium sulfate, and the solvent was distilled off. The residue was mixed with ethyl acetate for crystallization. The precipitated crystals were collected by filtration, were dried and thereby yielded tert-butyl 2-chloro-4-(2,4-dichlorobenzylamino)-6,7,8,9-tetrahydro-5H-pyrimido[4,5-d]azepine-7-carboxylate (4.27 g). After concentrating the filtrate, the residue was purified by silica gel column chromatography (n-hexane:ethyl acetate=3:1) and thereby yielded the target compound (0.76 g, 5.03 g in total with the above-mentioned crystals, in a yield of 60%).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, tert-Butyl 2,4-dichloro-8,9-dihydro-5H-pyrimido[4,5-d]azepine-7(6H)-carboxylate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; KYOWA HAKKO KOGYO CO., LTD.; EP1552842; (2005); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Electric Literature of 121492-06-6, These common heterocyclic compound, 121492-06-6, name is N-Boc-(2-Aminoethyl)-N-methylamine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 128: N-{5-[3-(4-Bromo-2-fluoro-phenylamino)-pyridin-4-yl]- [1 ,3,4]oxadiazol-2-yl}-N’-methyl-ettiane-1 ,2-diamine; Step 1 : 5-[3-(4-Bromo-2-fluoro-phenylamino)-pyridin-4-yl]-3H-[1 ,3,4]oxadiazol-2-one (example 19, 100mg, 0.277mmol) was dissolved in ethanol (3ml), N-(2-aminoethyl)-N – methylcarbamic acid ^-butylester (96rng, 0.554mmol) was added and the mixture was stirred for20min at 1500C in a microwave oven. The volatiles were removed to give the crude compound, which was used in the next step.Step 2: Dry dichloromethane (5ml) was added to the product derived from step 1 followed by triphenylphosphine (113rng, 0.429mmol), triethylamine (58mul, 0.416mmol) and carbon tetrachloride (107mul, 1.11 mmol). The mixture was heated at 1000C for20min in a microwave oven, the volatiles were removed and the crude material was purified by preparative HPLC to give 87mg (62/yield) of the Boc-protected title compound. The material was treated with 4N HCI in dioxane (4ml) for 1h at ambient temperature and the volatiles were removed to give the pure title compound. LC-MS (method V): rt = 1.94rnin; m/z [M+ H]+ 407/409.

The synthetic route of 121492-06-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; APPLIED RESEARCH SYSTEMS ARS HOLDING N.V.; WO2006/45514; (2006); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 636-76-0, name is 3-Sulfamoylbenzoic acid belongs to amides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. Application In Synthesis of 3-Sulfamoylbenzoic acid

To 3-aminosulfonylbenzoic acid (4.0g), N,N-dimethylformamide (53 ml), 1-(3-dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride (3.8 g), 1-hydroxybenzotriazole (2.7 g), N,O-dimethylhydroxylamine hydrochloride (1.9 g), and triethylamine (2.8 ml) were added under ice cooling and the mixture was stirred at room temperature for 12 hours. A potassium hydrogensulfate aqueous solution and ethyl acetate were added to the reaction solution and the mixture was separated. The aqueous layer was extracted with ethyl acetate. The combined organic layer was successively washed with distilled water, saturated sodium hydrogencarbonate aqueous solution, and saturated saline, dried over with anhydrous sodium sulfate, then concentrated. The obtained residue was purified by silica gel column chromatography (hexane/ethyl acetate=1/2). To the obtained N-methoxy-N-methyl-3-aminosulfonylbenzamide (1.8 g), tetrahydrofuran (36 ml) and ethyl magnesium bromide (0.89M tetrahydrofuran solution, 41 ml) were added under ice cooling, the mixture was stirred at room temperature for 3 hours, then saturated ammonium chloride aqueous solution and ethyl acetate were added to reaction solution, the mixture was separated, then organic layer was successively washed with saturated saline, dried over with anhydrous sodium sulfate, then concentrated. The obtained residue was purified by silica gel column chromatography (hexane/ethyl acetate=1/1). To the obtained 3-propionylbenzenesulfonamide (0.97 g), ethanol (2.5 ml), sodium acetate (0.56 g), and hydroxylamine hydrochloride (0.35 g) were added and the mixture was stirred at 90C for 3 hours. Ethyl acetate and water were added to the reaction solution, the mixture was separated, then the organic layer was successively washed with saturated saline, dried over with anhydrous sodium sulfate, then concentrated. The obtained 3-(N-hydroxypropanimidoyl)benzenesulfonamide was used instead of the starting material compound of Reference Example 109, that is, 1-(4-aminophenyl)propan-1-on oxime, for the similar procedure as with Reference Example 109 to obtain the title compound. NMR (DMSO-d6): delta8.50-8.36(3H, br), 7.92(1H, s), 7.83(1H, d, J=7.5Hz), 7.71-7.60(2H, m), 7.42(2H, s), 4.33-4.21(1H, br), 2.00-1.70(2H, m), 0.75(3H, t, J=7.4Hz) MS: 215(M+H)+

The synthetic route of 636-76-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Asubio Pharma Co., Ltd.; Daiichi Sankyo Company, Limited; EP2025672; (2009); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Reference of 17400-34-9,Some common heterocyclic compound, 17400-34-9, name is Benzyl (3-aminopropyl)carbamate hydrochloride, molecular formula is C11H17ClN2O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Intermediate 5 Benzyl N-r2-(pent-4-vnamido) propyll carbamate Pentynoic acid (0.267 g, 2.72 mmol) was added to a suspension of Z-propandiamine hydrochloride ( 1 g, 4 mmol), EDCI- HCI 767 mg, 4 mmol) a nd HOBt. H20 (540 mg, 4 mmol) in dry DCM (20 ml_) . The resulting mixture was cooled at 0C a nd TEA ( 1.12 ml_, 8 mmol) was added dropwise. The reaction mixture was stirred at 25C for 16h. The DCM solution was washed with NH4CI solution (20 ml_ x 2) and NaHC03 solution, the organic phase was filtered through a phase separator and evaporated to dryness to obta in the title compound as a white solid (800 mg) . The crude product was used in the next step without further purification . JH NMR (400 MHz, CDCI3) delta 7.41-7.31 (m, 5H), 6.20 (br s, 1 H), 5.27 (br s, 1 H), 5.12 (s, 2H), 3.34 (q , 2H), 3.27 (q , 2H), 2.59-2.52 (m, 2H), 2.42 (t, 2H), 2.02 (br s, 1 H) . UPLC-MS Rt=0.76; m/z (ES+) : 289 [M + H] + .

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route Benzyl (3-aminopropyl)carbamate hydrochloride, its application will become more common.

Reference:
Patent; LEO PHARMA A/S; S?RENSEN, Morten, Dahl; DI FABIO, Romani; POZZAN, Alfonso; CATALANI, Maria, Pia; BLADH, Haakon; FELDING, Jakob; WO2013/124286; (2013); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics