Category: amides-buliding-blocks

Application of 143557-91-9, A common heterocyclic compound, 143557-91-9, name is tert-Butyl 3-endo-3-hydroxy-8-azabicyclo[3.2.1]octane-8-carboxylate, molecular formula is C12H21NO3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of tert-butyl (3-endo)-3-hyd roxy-8-azabicyclo[3.2.1 ]octane-8-carboxylate (3g, 13.20 mmol, combi-blocks) in THF (30 mL) was added portion wise potassium tertbutoxide (1.6 g, 14.5 mmol). The reaction was then refluxed for lh. The reaction was removed from the oil bath and 1-bromo-2,4-difluoro-benzene (1.6 mL, 14.52 mmol, Matrix) was added. The reaction was again refluxed for 1 .5h and cooled to RT. Ethyl acetate was added. The layers were separated and the organic layer was washed withwater, brine, dried over sodium sulphate, filtered and concentrated in vacuo. The crude was purified by flash chromatography using 5% ethyl acetate in cyclohexane to give a colourless oil that crystallised upon standing (4.1 g, 79%). 1H NMR (400 MHz, DMSOd 6): 67.63-7.59 (m, 1H), 6.98 (dd, J1= 11.40, J2= 2.76 Hz, 1H), 6.76-6.71 (m, 1H), 4.81 (t, J= 4.40 Hz, 1H), 4.06 (s, 2H), 2.15-2.05 (m, 4H), 1.87-1.84 (m, 4H), 1.41 (s, 9H).LCMS: (Method A) 344.0 (M-?Bu-f-H), Rt. 6.2 mm, 84.9% (Max).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; ASCENEURON SA; QUATTROPANI, Anna; KULKARNI, Santosh S.; MURUGESAN, Kathiravan; BANERJEE, Joydeep; WO2014/198808; (2014); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Application of 183059-24-7, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 183059-24-7 name is tert-Butyl 2-hydroxy-2-methylpropylcarbamate, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

2,2-dimethyloxirane (0.1 g, 1.388 mmol) was added dropwise to 20 mL icecooled solution of ammonium hydroxide. The reaction mixture was stirred for 12 hours at roomtemperature. The solvent was removed under vacuum and the residue was dissolved inmethanol. Di-tert-butyl dicarbonate (0.75 g, 3.47 mmol) was added to the reaction mixture and15 stirred for 4 hours. The mixture was purified using column chromatography (24%EtOAc/hexane) to obtain tert-butyl 2-hydroxy-2-methylpropylcarbamate. The pure tert-butyl 2-hydroxy-2-methylpropylcarbamate was dissolved in 5 mL of trifluoroacetic acid and stirred for35 minutes. The solvent was removed under reduced pressure to afford 1-amino-2-methylpropan-2-ol as the trifluoroacetate salt 1′. 1H NMR 500 MHz (500 MHz, CDC13, 8 in20 ppm): 8 8.62 (s, 2H), 3.02 (d, 2H), 2.06-2.04 (m, 2H), 1.37-1.34 (s, 6H).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, tert-Butyl 2-hydroxy-2-methylpropylcarbamate, and friends who are interested can also refer to it.

Reference:
Patent; PURDUE RESEARCH FOUNDATION; ENDOCYTE, INC.; LOW, Philip Stewart; WANG, Bingbing; LEAMON, Christopher Paul; LU, Yingjuan J.; WHEELER II, Leroy W.; (102 pag.)WO2017/205661; (2017); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Some common heterocyclic compound, 37045-73-1, name is 3-(Methylsulfonamido)aniline, molecular formula is C7H10N2O2S, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Quality Control of 3-(Methylsulfonamido)aniline

Take a 25 mL Schlenk reaction tube, add 74 mg of 3-methanesulfonylaminoaniline, 9 mg of palladium acetate and 80 mg of molecular sieve.93 mg of ethyl 2-oxopropionate, 96 mg of acetic acid and 2 mL of dimethyl sulfoxide were injected, followed by a 200 mL oxygen balloon, and stirred at 70 C for 18 hours.After the reaction was completed, 15 mL of ethyl acetate was added to dilute the reaction mixture, and the filtrate was washed twice with 10 mL of brine, and the organic phase was separated. The aqueous phase was extracted with ethyl acetate. The organic phase was combined and purified by column chromatographyof Ethyl 6-Methanesulfonylamino-1H-indole-2-carboxylate pure product 78mg, yield 69%; ethyl 4-methanesulfonylamino-1H-indole-2-carboxylate pure product 1mg, yield 1 %.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 37045-73-1, its application will become more common.

Reference:
Patent; Chinese Academy Of Medical Sciences Pharmaceutical Institute; Xiao Zhiyan; Ren Long; Tang Yanbo; Yang Ying; (27 pag.)CN109748840; (2019); A;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 57561-39-4, name is tert-Butyl (2-hydroxyethyl)(methyl)carbamate, belongs to amides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 57561-39-4, HPLC of Formula: C8H17NO3

4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-IH-pyrazole (3.964 g, 20.43 mmol), DIAD (4.42 mL,22.47 mmol), triphenylphosphine (5.89 g, 22.47 mmol) and tert-butyl (2-hydroxyethyl)(methyl)carbamate (for a preparation see Intermediate 134, 3.58 g, 20.43 mmol) were dissolved in THF at 0 C under nitrogen for 48 h. The reaction mixture was concentrated and the orange oil triturated with diethyl ether. The precipitated solid was removed by filtration and washedwith more diethyl ether. The filtrate was concentrated to give 12.45 g of crude thick orange oil. This was purified by chromatography on silica (220 g cartridge, eluting with 0-100% ethyl acetate/cyclohexane over 13 CVs, collecting all fractions). Product fractions were combined to give the product (4.29 g, 12.21 mmol, 59.8%) as a yellow oil.LCMS (2 mm Formic): Rt = 1.07 mi [MH] = 352.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; GLAXOSMITHKLINE INTELLECTUAL PROPERTY (NO.2) LIMITED; AMANS, Dominique; ATKINSON, Stephen John; HARRISON, Lee Andrew; HIRST, David Jonathan; LAW, Robert Peter; LINDON, Matthew; PRESTON, Alexander; SEAL, Jonathan Thomas; WELLAWAY, Christopher Roland; WO2014/140076; (2014); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Some common heterocyclic compound, 123986-64-1, name is tert-Butyl 4-(hydroxymethyl)benzylcarbamate, molecular formula is C13H19NO3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: tert-Butyl 4-(hydroxymethyl)benzylcarbamate

Stage 3 – Preparation of te/t-butyl (4-formylbenzyl)carbamate; Stage 2 product (5.87g, 24.73mmol) was stirred in DCM (20OmL) with MnO2 (16.71g, 192.2mmol) for 16h at RT. The reaction was then filtered through celite and the solvent removed in vacuo to give the product as a yellow oil (4.63g, 80%). m/z = 258 [M+Na]

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 123986-64-1, its application will become more common.

Reference:
Patent; CHROMA THERAPEUTICS LTD.; WO2008/40934; (2008); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Electric Literature of 42137-88-2,Some common heterocyclic compound, 42137-88-2, name is N,N-Bis(2-chloroethyl)-4-methylbenzenesulfonamide, molecular formula is C11H15Cl2NO2S, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a stirred solution of (R)-1-(benzo[d][1,3]dioxol-5-yl)ethan-1-amine (2 g, 12.1 mmol) in DIPEA (4.22 mL, 24.2 mmol), N,N-bis(2-chloroethyl)-p-toluene sulfonamide (3.9 g, 13.3 mmol) was added at rt and the resulting mixture was heated to 105 C for 18 h. Completion of the reaction was confirmed by TLC. Reaction mixture was diluted with water (30 mL) and extracted with EtOAc (2 x 50 mL). The combined organic layer was dried over Na2SO4 and evaporated under vacuum. To the resulting crude solid hexane (50 mL) was added, and the resulting mixture was stirred for 10 min at rt. It was filtered and the solid was washed with Et2O (2 x 50 mL) and dried under vacuum to give the title compound. Yield: 63.8% (3 g, off white solid). 1H NMR (400 MHz, DMSO-d6): delta 7.59 (d, J = 8.4 Hz, 2H), 7.45 (d, J = 8.0 Hz, 2H), 6.81-6.77 (m, 2H), 6.69-6.6 (m, 1H), 5.97-5.95 (m, 2H), 3.35-3.31 (m, 1H), 2.81-2.80 (m, 4H), 2.42 (s, 3H), 2.36-2.32 (m, 4H), 1.18 (d, J= 6.8 Hz, 3H). LCMS: (Method A) 389.0 (M+H), Rt. 3.39 min, 98.9% (Max). HPLC: (Method A) Rt. 3.30 min, 99.53% (Max), Chiral HPLC: (Method A) Rt. 15.54 min, 97.58%.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route N,N-Bis(2-chloroethyl)-4-methylbenzenesulfonamide, its application will become more common.

Reference:
Patent; ASCENEURON SA; QUATTROPANI, Anna; KULKARNI, Santosh S.; GIRI, Awadut Gajendra; (243 pag.)WO2016/30443; (2016); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 389890-43-1, name is tert-Butyl (cis-3-hydroxycyclobutyl)carbamate, belongs to amides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 389890-43-1, Application In Synthesis of tert-Butyl (cis-3-hydroxycyclobutyl)carbamate

In a round-bottomed flask charged with tert-butyl(cis-3-hydroxycyclobutyl)carbamate (1.11 g, 5.93 mmol) and triethylamine (2.474 ml, 17.79 mmol) was added CH2Cl2 (12 ml). methanesulfonyl chloride (0.505 ml, 6.52 mmol) was added dropwise via syringe at -20 C. over 5 min. The reaction mixture was stirred at room temperature for 30 min, then diluted with water (15 mL) and extracted with CH2Cl2(2*). The organic extract was washed with saturated NH4Cl and dried over MgSO4. It was filtered and concentrated in vacuo to give cis-3-((tert-butoxycarbonyl)amino)cyclobutyl methanesulfonate (1.64 g, 6.1 mmol, 100% yield) as a off-white solid.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, tert-Butyl (cis-3-hydroxycyclobutyl)carbamate, and friends who are interested can also refer to it.

Reference:
Patent; AMGEN INC.; Allen, Jennifer R.; Amegadzie, Albert; Andrews, Kristin L.; Brown, James; Chen, Jian J.; Chen, Ning; Harrington, Essa Hu; Liu, Qingyian; Nguyen, Thomas T.; Pickrell, Alexander J.; Qian, Wenyuan; Rumfelt, Shannon; Rzasa, Robert M.; Yuan, Chester Chenguang; Zhong, Wenge; US2013/225552; (2013); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 114790-39-5 as follows. Computed Properties of C12H17NO4

A solution of benzyl N-(2,2-dimethoxyethyl)carbamate (50 g, 208.9 mmol) in toluene (180 mL) is treated with solid potassium hydroxide (51.6 g, 919.69 mmol) under nitrogen. After 10 minutes, benzyltriethylammonium chloride (0.8 g, 3.1 mmol) is added. After another 10 minutes a solution of allyl bromide (33 g, 272.8 mmol) in toluene (50 mL) is added dropwise over 10 minutes. The resultant mixture is stirred at 50 C for 48hours. The mixture is cooled to room temperature and quenched with water. The organic layer is separated, washed with brine, dried over magnesium sulfate, and concentrated to dryness to give the title compound (44 g, 75%). ES/MS (mlz): 280 (M+H).

According to the analysis of related databases, 114790-39-5, the application of this compound in the production field has become more and more popular.

Reference:
Patent; ELI LILLY AND COMPANY; COATES, David Andrew; WOLFANGEL, Craig Daniel; (55 pag.)WO2016/122968; (2016); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 127828-22-2, name is tert-Butyl (2-(2-aminoethoxy)ethyl)carbamate, belongs to amides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 127828-22-2, COA of Formula: C9H20N2O3

A solution of 6-chloro-4-hydroxy-5-methyl-3-nitropyridin-2(iH)-one (10.9 g, 53.4 mmol) in dichloromethane (380 mL) was cooled to 0 C. Triethylamine (22.3 mL, 160 mmol) was added, and the solution was stirred for ten minutes. Trifluoromethanesulfonic anhydride (18.0 mL, 107 mmol) was then added dropwise over a period of five minutes, and the solution was stirred for 1.5 hours at 0 C. A solution of tert-butyl 2-(2-aminoethoxy)ethylcarbamate (12.0 g, 58.8 mmol), prepared as described in Parts A through D of Example 102, in a small amount of dichloromethane was then added over a period of five minutes, and the reaction was allowed to warm to room temperature slowly and stirred overnight. The solution was then washed with water (2×150 mL) and brine (150 mL), dried over magnesium sulfate, filtered, and concentrated under reduced pressure. The residue was purified by column chromatography on silica gel (eluting sequentially with 80:20 hexanes:ethyl acetate and 50:50 hexanes:ethyl acetate) to provide a yellow oil, which was dissolved in diethyl ether and concentrated under reduced pressure to provide 16.5 g of trifluoromethanesulfonic acid 4-[(2-{2-[(tert-butoxycarbonyl)amino]ethoxy}ethyl)amino]-6-chloro-5-methyl-3-nitropyridin-2-yl ester as a solid.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, tert-Butyl (2-(2-aminoethoxy)ethyl)carbamate, and friends who are interested can also refer to it.

Reference:
Patent; Dellaria, Joseph F.; Lindstrom, Kyle J.; Dressel, Luke T.; Duffy, Daniel E.; Heppner, Philip D.; Jacobsen, John R.; Moseman, Joan T.; Moser, William H.; Radmer, Matthew R.; Stoermer, Doris; Zimmermann, Bernhard M.; US2004/10007; (2004); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 1259224-00-4, name is tert-Butyl (1-(4-aminophenyl)cyclobutyl)carbamate, A new synthetic method of this compound is introduced below., Quality Control of tert-Butyl (1-(4-aminophenyl)cyclobutyl)carbamate

To the solution of 4,6-dichloro-5-iodopyrimidine (5.50 g, 20.00 mmol) (prepared according to the ref of Organic Letters; English; 11; 8; 2009; 1837 – 1840; ) in dioxane (100 mL) was slowly added the solution of tert-butyl l-(4-aminophenyl)cyclobutylcarbamate (5.2 g, 20.00 mmol) in dioxane (20 mL) and Et3N(5 ml). The reaction mixture was stirred at 80C for overnight, lc-ms indicated 4,6-dichloro-5-iodopyrimidine was completed consumed. After removed the excess solvents under the reduced pressure to get a residue, which was dissolved in Ethyl acetate (250 mL) and washed water and brine. The combined organic layer was dried over Na2S04 and then filtered, the filtrate was concentrated to give the crude product, which was further purified by flash chromatography to afford tert-butyl l-(4-(6-chloro-5-iodopyrimidin-4- ylamino)phenyl)cyclobutylcarbamate. (5.00 g 50% yield).LC/MS: (ESI+): 501 [M+l], 523 [M+Na].

The synthetic route of 1259224-00-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ARRAY BIOPHARMA INC.; GENENTECH, INC.; SKELTON, Nicholas; GRADL, Stefan; BLAKE, James F.; GRAHAM, James M.; GUNAWARDANA, Indrani W.; HENTEMANN, Martin; MARLOW, Allison L.; TANG, Tony P.; WO2013/78254; (2013); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics