Category: amides-buliding-blocks

Adding a certain compound to certain chemical reactions, such as: 121492-06-6, name is N-Boc-(2-Aminoethyl)-N-methylamine, belongs to amides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 121492-06-6, Quality Control of N-Boc-(2-Aminoethyl)-N-methylamine

To a cooled (-5 C) solution of Lambda/-(2-aminoethyl)-Lambda/-methylcarbamic acid-te/-butyl ester (5 g , 28.7 mmol) in ethanol (60 ml) was added triethylamine. 2-Chloro-4,6-dimethoxy-5-nitropyrimidine (Intermediate 13; 4 g, 18.2 mmol) was added portion-wise over a period of ca. 10 min. The mixture was stirred for a further hour at 0 0C (reaction complete according to analysis (TLC). The ethanol was then removed under reduced pressure and the resulting yellow oil was purified by column chromatography (SiO2, 1 :2 ethyl acetate: petroleum ether) to give a yellow solid (3.76 g; 58%). m/z 358.21 (MH+).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; PARADIGM THERAPEUTICS LTD.; WO2007/582; (2007); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Electric Literature of 22246-76-0, These common heterocyclic compound, 22246-76-0, name is 8-Amino-4,5-dihydro-1H-benzo[b]azepin-2(3H)-one, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example No. 217Preparation of methyl 3- (7- ( (2-oxo-2 , 3 , 4 , 5-tetrahydro-lH- benzo [b] azepin-8-yl) amino) -IH-pyrazolo [4, 3-d] pyrimidin- 5- yl) benzoate methyl 3- (7-chloro-2- (4-methoxybenzyl) -2H-pyrazolo [4,3- d] pyrimidin- 5 -yl) benzoate (0.16 mmol) and 8 -amino-4 , 5 -dihydro- lH-benzo [b] azepin-2 (3H) -one (0.3 mmol 2 eq. , ) were suspended in MeOH (dry, 3mL) in a microwave vial (2-5mL) , HC1 in dioxane (4M, 3 drops) was added. The reaction mixture was irradiated in a microwave reactor for 5 min at 140C. The reaction mixture was evaporated and used without further purification. The residue was dissolved in TFA (3mL) . The reaction mixture was irradiated in a microwave reactor for 5 min at 140C. The reaction mixture was concentrated and purified by semi- preparative HPLC-MS and freeze dried from water/t-BuOH 4/1. exact mass: 428.1868 g/molHPLC-MS: analytical method Lrt: 4.65 min – found mass: 429 (m/z+H)

The synthetic route of 22246-76-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ORIGENIS GMBH; ALMSTETTER, Michael; THORMANN, Michael; TREML, Andreas; TRAUBE, Nadine; WO2012/143144; (2012); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Application of 144-80-9, A common heterocyclic compound, 144-80-9, name is N-((4-Aminophenyl)sulfonyl)acetamide, molecular formula is C8H10N2O3S, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

0.6 g (0.0028 mol) of sulfacetamide was dissolved in 20 mL of N,N-dimethylformamide.then,1.0 g (0.0316 mol) ofloxacin and 1.3 g (0.0063 mol) of dicyclohexylcarbodiimide were added.Heating to 80 C for heating,And stirring for 15 hours,Obtaining an initial ofloxacin-sulfacetamide hybrid drug reaction solution,among them,In order to understand the progress of the reaction in time,The reaction was followed by a thin layer chromatography silica gel plate.In the process,Ofloxacin gradually dissolves,The solution turns orange-red;The initial ofloxacin-sulfacetamide hybrid drug reaction solution is subjected to impurity removal treatment to obtain a purified substance of ofloxacin-sulfaacetic acid hybrid drug.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Wuhan Institute of Technology; Zhu Hong; Li Shuang; Zhang Huan; Ding Jiao; Li Li; Zeng Xiangcong; Li Xue; (6 pag.)CN109438473; (2019); A;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 94838-59-2, name is tert-Butyl 4-aminophenethylcarbamate, belongs to amides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 94838-59-2, Safety of tert-Butyl 4-aminophenethylcarbamate

Example 167 N-[4-(2-tert-Butoxycarbonylaminoethyl)phenyl]-(2-chloro-5-nitrophenyl)carboxamide The title compound (10.0 g, yield 99%) was obtained according to the procedure described in Example 2 using 4-(2-tert-butoxycarbonylaminoethyl)aniline (5.66 g, 24 mmol), DMA (50 ml) and 2-chloro-5-nitrobenzoyl chloride (6.32 g, 28.8 mmol). 1H-NMR (400 MHz, DMSO-d6, TMS): delta(ppm) 1.37 (9H, s), 2.67 (2H, t, J=7.5 Hz), 3.10-3.13 (2H, m), 7.19 (2H, d, J=8.4 Hz), 7.61 (2H, d, J=8.4 Hz), 7.89 (1H, d, J=8.8 Hz), 8.34 (1H, dd, J=2.8, 8.8 Hz), 8.44 (1H, d, J=2.8 Hz), 10.64 (1H, s); MS(FAB) m/z: 420 (M+H)+.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, tert-Butyl 4-aminophenethylcarbamate, and friends who are interested can also refer to it.

Reference:
Patent; SANKYO COMPANY, LIMITED; US2003/134859; (2003); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

2227-79-4, name is Benzothioamide, belongs to amides-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Product Details of 2227-79-4

A mixture of benzenecarbothioamide (6.86 g) , 1,3- dichloroacetone (6.35 g) and toluene (50 mL) was heated under reflux for 3 hr. The reaction mixture was cooled, and water was added thereto. The mixture was extracted with ethyl acetate, and the extract was washed with water and saturated brine, dried over anhydrous sodium sulfate, and concentrated under reduced pressure. The residue was purified by silica gel column chromatography (ethyl acetate/hexane) to give the title compound (9.77 g) . MS: [M+H]+ 210.1.

The synthetic route of 2227-79-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; TAKEDA PHARMACEUTICAL COMPANY LIMITED; KAJITA, Yuichi; MIKAMI, Satoshi; MIYANOHANA, Yuhei; KOIKE, Tatsuki; DAINI, Masaki; OYABU, Norio; OGINO, Masaki; TAKEUCHI, Kohei; ITO, Yoshiteru; TOKUNAGA, Norihito; SUGIMOTO, Takahiro; MIYAZAKI,Tohru; ODA, Tsuneo; HOASHI, Yasutaka; HATTORI,Yasushi; IMAMURA, Keisuke; (413 pag.)WO2019/27058; (2019); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Electric Literature of 55512-05-5,Some common heterocyclic compound, 55512-05-5, name is 3-(Methylsulfonamido)benzaldehyde, molecular formula is C8H9NO3S, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Under argon and at 0 C., 83 mg (0.417 mmol) of N-(3-formylphenyl)methanesulfonamide (Example 86A) were initially charged in 1 ml of abs. tetrahydrofuran. At 0 C., 99 mg (0.833 mmol) of methylmagesium bromide (3 M in diethyl ether) were added dropwise (resulting in the formulation of a precipitate), and the reaction solution was stirred at this temperature for 2 h. The reaction solution was quenched with water and extracted three times with ethyl acetate. The combined organic phases were dried over sodium sulfate, filtered and evaporated. Yield: 80 mg (89% of theory) LC-MS (Method 8): Rt=1.15 min; MS (ESIpos): m/z=214 [M-H]-.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 3-(Methylsulfonamido)benzaldehyde, its application will become more common.

Reference:
Patent; BAYER INTELLECTUAL PROPERTY GMBH; Vakalopoulos, Alexandros; Meibom, Daniel; Nell, Peter; Sussmeier, Frank; Albrecht-Kupper, Barbara; Zimmermann, Katja; Keldenich, Joerg; Schneider, Dirk; Krenz, Ursula; US2013/210795; (2013); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Application of 92748-09-9,Some common heterocyclic compound, 92748-09-9, name is 2-Bromobenzenesulfonamide, molecular formula is C6H6BrNO2S, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

STR28 (Process (b)) 2.5 g (10 mmol) of 2-bromo-benzolsulphonamide are dissolved in 40 ml acetonitrile, and 3.2 g (10 mmol) of 4-methyl-2-phenoxycarbonyl-5-(3-tetrahydrofuryl-oxy)-2,4-dihydro-3H-1,2,4-triazol-3-one and 1.6 g (10 mmol) of diazabicycloundecene (DBU) are added with strirring. The mixture is stirred at 20 C. for 12 hours and then concentrated under a water pump vacuum. The residue is taken up in methylene chloride and the mixture is washed with 10% strength hydrochloric acid, dried over sodium sulphate and filtered. The filtrate is concentrated under a water pump vacuum, the residue is digested with isopropanol/petroleum ether (1/5) and the crystalline product obtained is isolated by filtration with suction. 3.5 g (78% of theory) of 2-(2-bromo-phenylsulphonyl-aminocarbonyl)-4-methyl-5-(3-tetrahydrofuryl-oxy)-2,4-dihydro-3H-1,2,4-triazol-3-one are obtained of melting point 191 C. In analogy to Example 1 or 2 and in accordance with the general description of the preparation processes according to the invention it is also possible, for example, to prepare the compounds of the formula (I) which are listed in Table I below. STR29

The synthetic route of 92748-09-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Bayer Aktiengesellschaft; US6001776; (1999); A;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 5763-44-0, name is Tetrahydrocyclopenta[c]pyrrole-1,3(2H,3aH)-dione, A new synthetic method of this compound is introduced below., Formula: C7H9NO2

tert-Butyl 4-(4-chloro-2-(2-((1,3-dioxohexahydrocyclopenta[c]pyrrol-2(1H)-yl)methyl)thieno[3,2-b]pyridin-7-yl)-6-methylphenoxy)piperidine-1-carboxylate. To diisopropyl azodicarboxylate (99 mg, 0.49 mmol) and tert-butyl 4-[4-chloro-2-[2-(hydroxymethyl)thieno[3,2-b]pyridin-7-yl]-6-methyl-phenoxy]piperidine-1-carboxylate (30 mg, 0.06 mmol) in THF (5 mL) was added triphenylphosphine polymer bound (0.55 mmol) and 4,5,6,6a-tetrahydro-3aH-cyclopenta[c]pyrrole-1,3-dione (61 mg, 0.44 mmol). Stirred at 60 C. for 2 h. The mixture was filtered and the filtrate washed twice with EtOAc. Combined all organic phases and washed with water and brine. Concentrated under vacuo and purified by column chromatography with hexanes:EtOAc (70% to 100%) to give 26 mg (69%) of the title compound as a light yellow oil. [M+H] 610.0

The synthetic route of 5763-44-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; FLX Bio, Inc.; Biannic, Berenger; Han, Xinping; Hu, Dennis X.; Ketcham, John Michael; Leger, Paul Robert; Maung, Jack; Okano, Akinori; Schwarz, Jacob Bradley; Shibuya, Grant; Wustrow, David Juergen; Young, Kyle; US2019/142834; (2019); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 354-38-1, name is 2,2,2-Trifluoroacetamide, This compound has unique chemical properties. The synthetic route is as follows., Application In Synthesis of 2,2,2-Trifluoroacetamide

Intermediate 186 (0.43 g, 1.22 mmol) was dissolved in DCM (20 mL) and 2,2,2- trifluroacetamide (0.28 g, 2.49 mmol), magnesium oxide (0.21 g, 5.1 mmol), rhodium(II) acetate dimer (0.028 g, 0.064 mmol) and iodobenzene I,I-diacetate (0.53 g, 1.65 mmol) were added. After 18 h at r.t. the pink solution was filtered through a pad of celite and concentrated in vacuo. The residue was purified by column chromatography (Si02, 20- 60% EtOAc:DCM) to yield the title compound (0.39 g, 90%). HPLC-MS : MH+ mlz 431 , RT 2.00 minutes

According to the analysis of related databases, 354-38-1, the application of this compound in the production field has become more and more popular.

Reference:
Patent; UCB BIOPHARMA SPRL; BRACE, Gareth Neil; CHOVATIA, Prafulkumar Tulshibhai; FOULKES, Gregory; JOHNSON, James Andrew; JONES, Severine Danielle; KROEPLIEN, Boris; LECOMTE, Fabien Claude; LOKE, Pui Leng; LOWE, Martin Alexander; MANDAL, Ajay; NORMAN, Timothy John; PALMER, Christopher Francis; PEREZ-FUERTES, Yolanda; PORTER, John Robert; SMYTH, Donald; TRANI, Giancarlo; UDDIN, Muhammed; ZHU, Zhaoning; (207 pag.)WO2016/198400; (2016); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 121492-06-6, name is N-Boc-(2-Aminoethyl)-N-methylamine, A new synthetic method of this compound is introduced below., name: N-Boc-(2-Aminoethyl)-N-methylamine

Step 1 [0216] A solution of N-Boc-N-methylethylenediamine (1 g, 5.74 mmol) and sulfamide (1.1 g, 11.48 mmol) in dioxane (20 mL) was stirred at reflux under N2 atmosphere (monitored by TLC). The mixture was then filtered to remove the insoluble material and the filtrate was concentrated under reduced pressure and treated with ethyl acetate. The insoluble material was again removed by filtration and the filtrate concentrated under reduced pressure to give the desired product in 96% yield.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; FOB SYNTHESIS; WO2005/123066; (2005); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics