Amides-buliding-blocks

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 40724-47-8, name is 4-Bromomethylbenzenesulfonamide, A new synthetic method of this compound is introduced below., Quality Control of 4-Bromomethylbenzenesulfonamide

To a stirring solution of 4-(4-(difluoromethoxy)-2-hydroxy-3-methoxyphenyl)-2,3- dihydro-lH-inden-l-one (80 mg, 0.25 mmol) in acetonitrile (10 ml_), was added potassium carbonate (104 mg, 0.75 mmol) and 4-bromomethyl-benzenesulfonamide (125 mg, 0.5 mmol) and the resultant reaction mixture was heated to 80 ¡ãC for 16 h. The reaction mixture was cooled to RT and filtered through celite and the filtrate was concentrated under reduced pressure. The residue was purified by columnchromatography (silica gel, 0-70percent ethyl acetate in pet ether) to afford title compound as a solid (40 mg, 33percent).UPLC-MS (M + l) : 490.11 ; UPLC-MS RT (min) : 2.4

The synthetic route of 40724-47-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; LEO PHARMA A/S; NIELSEN, Simon Feldbaek; HORNEMAN, Anne Marie; LAU, Jesper Faergemann; LARSEN, Jens Christian H¡ãjland; WO2011/134468; (2011); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 683-57-8, name is 2-Bromoacetamide, This compound has unique chemical properties. The synthetic route is as follows., Recommanded Product: 2-Bromoacetamide

Example 304J 2-({3-[1-(cyclobutylamino)-4-hydroxy-2-oxo-1,2-dihydroquinolin-3-yl]-1,1-dioxido-4H-1,2,4-benzothiadiazin-7-yl}oxy)acetamide The product of Example 3041 (0.048 g, 0.11 mmol) in N,N-dimethylformamide (2 ML) was reacted with cesium carbonate (0.15 g, 0.45 mmol), bromoacetamide (0.026 ML, 0.18 mmol), and a catalytic amount of tetrabutylammonium iodide at 25 C. for 3 hours.The reaction was concentrated under a stream of nitrogen stream of nitrogen warmed through a manifold heated to 165 C. and the resulting residue was triturated with water, filtered and dried.The resulting solid was triturated in hot ethyl acetate, filtered, and dried to give the title compound (0.020 g, 37%). MS (ESI-) m/z 482 (M-H)-. 1H NMR (300 MHz, DMSO-d6) delta ppm 1.59 (m, 2H) 1.99 (m, 4H) 3.60 (m, 1H) 4.49 (s, 2H) 6.08 (d, J=6.62 Hz, 1H) 7.05 (t, J=7.17 Hz, 1H) 7.20 (m, 3H) 7.40 (s, 1H) 7.50 (m, 1H) 7.65 (m, 2H) 8.05 (d, J=7.72 Hz, 1H) 16.25 (s, 1H).The sodium salt of the title compound was prepared according to the procedure of Example 1D. 1H NMR (300 MHz, DMSO-d6) delta ppm 1.59 (m, 1H) 1.99 (m, 4H) 3.61 (m, 2H) 4.49 (s, 2H) 6.08 (d, J=6.62 Hz, 1H) 7.05 (m, 1H) 7.21 (m, 2H) 7.40 (s, 2H) 7.50 (m, 1H) 7.64 (m, 2H) 8.06 (dd, J=7.91, 1.29 Hz, 1H) 8.32 (s, 1H).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 683-57-8.

Reference:
Patent; Pratt, John K.; Betebenner, David A.; Donner, Pamela L.; Green, Brian E.; Kempf, Dale J.; McDaniel, Keith F.; Maring, Clarence J.; Stoll, Vincent S.; Zhang, Rong; US2004/167123; (2004); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Application of 116195-15-4,Some common heterocyclic compound, 116195-15-4, name is (R)-(-)-(2-Methylacryloyl)-2,10-camphorsultam, molecular formula is C14H21NO3S, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step 2. Synthesis of (3aS,6R,7aR)-8,8-dimethyl-1-{[(5R)-5-methyl-4,5-dihydro-1 H-pyrazol-5- yl]carbonyl}hexahydro-3a,6-methano-2, 1 -benzisothiazole 2,2-dioxideTMSCHN262% Procedure: To a solution of (trimethylsilyl)diazomethane in ether (2M; 20ml) was added the solid (3aS,6R,7aR)-1 -methacryloyl-delta.delta-dimethylhexahydro-Sa.beta-methano^.i -benzisothiazole 2,2-dioxide and then the reaction mixture was stirred at room temperature for 72 hours. A solution formed. The solution was evaporated in vacuo and then diluted with methylene chloride (50ml), cooled to 0 C and then trifluoroacetic acid (1.2ml) was added drop wise. The mixture was stirred for 2h at 00C. The reaction mixture was diluted with ethyl acetate (200ml) and washed with sat. NaHCO3 (200 imL). The organic phase was washed with brine (200 mL) and then dried with magnesium sulfate. The organic solvents were removed in vacuo and the product purified by silica gel chromatography (eluant 10-100 EtOAc in hexane) and then treated with ether. The product was isolated as a solid (2.9Og, 56% yield). Optical rotation = 0.02Og in 2ml; c=0.01g/ml {C= 1 (CHCI3)); measurement -0.287; optical rotation = – 0.287×4000/10 = – 114.8 (using a Perkin-Elmer 241 Polarimeter).Combustion Analysis:1 H NMR (400 MHz, DMSO-D6) delta ppm 0.87 (m, 3 H), 0.98 (s, 3 H),1.21 (m, 1 H), 1.32 (s, 3 H), 1.40 (m, 1 H), 1.71 (m, 4 H), 1.85 (dd, J=13.35, 7.70 Hz, 1 H), 2.54 (dd, J=17.16, 1.56 Hz, 1 H), 3.13 (dt, J=17.20, 1.34 Hz, 1 H)1 3.64 (d, J=14.04 Hz, 1 H), 3.74 (d, J=14.04 Hz1 1 H), 3.83 (dd, J=7.60, 4.68 Hz, 1 H), 6.62 ;(t, J=1.46 Hz, 1 H), 6.78 (S1 1 H)

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route (R)-(-)-(2-Methylacryloyl)-2,10-camphorsultam, its application will become more common.

Reference:
Patent; PFIZER PRODUCTS INC.; WO2008/65503; (2008); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Electric Literature of 127828-22-2,Some common heterocyclic compound, 127828-22-2, name is tert-Butyl (2-(2-aminoethoxy)ethyl)carbamate, molecular formula is C9H20N2O3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: To a solution of mono-Boc protected diamine linker (0.1 mmol, 1 eq) and iBET726(36 mg, 0.1 mmol, 1 eq) in DMF (1 mL), COMU (43 mg, 0.1 mmol, 1 eq) and DIPEA (48 mircoL) were added. The reaction mixture was stirred at room temperature for 1 hour, then quenched with ice cold water. Volatiles were removed in vacuum and the crude mixture was purified by preparative HPLC (METHOD 2). Fractions containing the desired product were evaporated under reduced pressure and the reside was dissolved in DCM (1 mL) and treated with a solution of anhydrous HC1 in dioxane (4M, 1 mL). After 1 hour, volatiles were removed under reduced pressure and the reside was freeze dried in order to remove any excess of acid. Analytical data (HRMS) are provided in table III shown below.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route tert-Butyl (2-(2-aminoethoxy)ethyl)carbamate, its application will become more common.

Reference:
Patent; UNIVERSITY OF DUNDEE; TESTA, Andrea; HUGHES, Scott; BUTCHER, Steven Peter; CIULLI, Alessio; (279 pag.)WO2019/238886; (2019); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Synthetic Route of 63920-73-0,Some common heterocyclic compound, 63920-73-0, name is 2-Amino-4,6-dimethoxybenzamide, molecular formula is C9H12N2O3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 126 Preparation of 5,7-Dimethoxy-2-(3-methoxyphenyl)quinazolin-4(3H)-one A mixture of 2-amino-4,6-dimethoxybenzamide (0.0600 g, 0.306 mmol), 3-methoxybenzaldehyde (0.306 mmol), NaHSO3 (94%, 0.0474 g, 0.428 mmol), and p-TsOH.H2O (0.0175 g, 0.0918 mmol) in DMA (3.06 mL) was heated at 140 C. for 20 hours. The mixture was diluted with EtOAc (300 mL), washed with water (3*75 mL), then brine (75 mL), dried over sodium sulfate, filtered, and concentrated under vacuum. The residue was purified on silica gel (40 g, CH2Cl2/MeOH) and the product was freeze-dried from MeCN/H2O to provide the title compound (69%) as an off-white solid. 1H NMR (300 MHz, DMSO-d6): delta 12.04 (s, 1H), 7.82-7.70 (m, 2H), 7.43 (t, J=7.98 Hz, 1H), 7.13 (dd, J=8.19, 2.46 Hz, 1H), 6.76 (d, J=2.19 Hz, 1H), 6.55 (d, J=2.19 Hz, 1H), 3.92-3.82 (m, 9H); MS (APCI) m/z 313 [C17H16N2O4+H]+.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2-Amino-4,6-dimethoxybenzamide, its application will become more common.

Reference:
Patent; Resverlogix Corp.; Hansen, Henrik C.; (96 pag.)US9238640; (2016); B2;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

These common heterocyclic compound, 193751-54-1, name is tert-Butyl cyclopent-3-en-1-ylcarbamate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Formula: C10H17NO2

Solid NAHCO3 (0.0167 mol) and M-CPBA (0. 0128 mol) were added in portions to a stirred solution of cyclopent-3-enyl-carbamic acid tert-butyl ester IV-1 (0.0093 mol) in CH2C12 (60 mL). The mixture was stirred at 0 C for the first 2 h of the reaction and then allowed to stir for about 48 h at room temperature. Aqueous 20% NA2S03 (30 mL) was added, and the two layers were separated. The aqueous layer was extracted with CH2C12 (20 mL X 3), and the combined organic layers were washed with 20% NA2SO3 (30 mL X 1), 5 % NAHCO3 (30 mL X 1), and water (30 mL X 1). The combined organic phase was concentrated in vacuo, and the residue was purified by column chromatography (silica gel, 100% dichloromethane) to give pure product as a colorless oil (64%).

The synthetic route of tert-Butyl cyclopent-3-en-1-ylcarbamate has been constantly updated, and we look forward to future research findings.

Reference:
Patent; NORTHWESTERN UNIVERSITY; WO2005/26111; (2005); A2;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Application of 7341-96-0, A common heterocyclic compound, 7341-96-0, name is Propiolamide, molecular formula is C3H3NO, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A solution of 4-(tert-butyl-dimethyl-silanyloxymethyl)-benzaldehyde oxime (which may be made as described in Preparation of Intermediate 17; 3 g, 11.3 mmol) in DMF (25 mL) was cooled to 0 C and N-chlorosuccinimide (1.51 g, 11.3 mmol) was added in portions. The cooling bath was removed and the reaction mixture was stirred for 2.5 h. The mixture was poured into ice- water (75 mL) and this was extracted with Et2O (3 x 100 mL). The combined organic layers were washed with brine, dried (Na2SO4) and evaporated to give a solid (3.5 g). The solid was dissolved in 50% aqueous tert-butanol (60 mL) in a flask that was open to the air. Propiolamide (which may be prepared as described in Matsumoto, T. et al. US 7,851,473 Column 128; 0.7 mL, 6.85 mmol) was added, followed by 1 M sodium ascorbate (1.13 mL, 1.13 mmol) and 0.1 M copper(II) sulfate (5.65 mL, 0.565 mmol). KHCO3 (4.52 g, 45.1 mmol) was added in portions and the reaction mixture was stirred at room temperature for 2.5 h. H2O (100 mL) was added and a yellow solid was filtered off and dried under high vacuum overnight (3 g). This material was taken up in CH2Cl2/acetone and filtered. The filtrate was evaporated and the residue was purified by chromatography (9-20% acetone/CH2Cl2) to give 3-[4-(tert-butyl-dimethyl- silanyloxymethyl)-phenyl]-isoxazole-5-carboxylic acid amide (800 mg, 21%). Purification of mixed fractions by chromatography (50-60% EtO Ac/toluene) provided a further 450 mg (12%) of 3-[4-(tert-butyl-dimethyl-silanyloxymethyl)-phenyl]-isoxazole-5-carboxylic acid amide.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; ERICKSON, Shawn, David; GILLESPIE, Paul; MERTZ, Eric; WO2014/86704; (2014); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

5466-88-6, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 5466-88-6 name is 2H-1,4-Benzoxazin-3(4H)-one, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

2. Synthesis of 3-oxo-3,4-dihydro-2H-benzo[b’||’l,4]oxazine-6-sulfonyl chloride.2H-Benzo[b][l,4]oxazin-3(4H)-one (13.4 mmol) was added in several batches over 20 min to sulfurochloridic acid (10 mL) at 0 0C and the reaction mixture was maintained for 1 h. The reaction mixture was cautiously poured into ice (100 g) and the resulting mixture was extracted with dichloromethane (100 mL). The organic layer was dried (sodium sulfate) and concentrated to provide 3-oxo-3,4-dihydro-2H-benzo[b][l,4]oxazine-6-sulfonyl chloride in 66% yield as a white solid. Data: 1HNMR (400MHz, CDC13) delta 9.29 (s, IH), 7.71 (d, 2H), 7.52 (s, IH), 7.16 (d, 2H), 4.80 (s, 2H). LC/MS (ES) m/z 317 [M+BnNH-H].

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 2H-1,4-Benzoxazin-3(4H)-one, and friends who are interested can also refer to it.

Reference:
Patent; MEMORY PHARMACEUTICALS CORPORATION; DANCA, Mihaela, Diana; DUNN, Robert; TEHIM, Ashok; XIE, Wenge; WO2010/21797; (2010); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

1882-71-9, The chemical industry reduces the impact on the environment during synthesis 1882-71-9, name is 2-Amino-5-methoxybenzamide, I believe this compound will play a more active role in future production and life.

General procedure: A mixture of 2-aminobenzamide (1, 4.0 mmol), carboxamide (2, 6.0 mmol), Yb(OTf)3 (0.20 mmol,5.0 molpercent), and mesitylene (5.0 mL) was placed in a 20-mL Pyrex flask equipped with a magnetic stirring bar and a reflux condenser under a flow of argon. The reaction was carried out at 120-165 oC (bath temp.) for 6 h with stirring. Then, the reaction mixture was cooled to room temperature, and analyzed by GLC, GC-MS (EI), and LC-MS (ESI). After evaporation of mesitylene under vacuum,the products (3) were isolated by recrystallization from MeOH/hexane and/or medium pressure column chromatography on silica gel (eluent: EtOAc/hexane = 50/50 ~ EtOAc 100percent. For 3j, eluent:MeOH/CHCl3 = 50/50). 1H NMR spectra were recorded at 400 MHz, and 13C NMR spectra wererecorded at 100 MHz in DMSO-d6. The analytical and spectral data of 3a-e,38 3f,39 3g,40 3h,41 and3j,42 were consistent with those reported previously. The product, 3i, was characterized below.

The chemical industry reduces the impact on the environment during synthesis 2-Amino-5-methoxybenzamide. I believe this compound will play a more active role in future production and life.

Reference:
Article; Yoshimura, Tsutomu; Yuanjun, Di; Kimura, Yu; Yamada, Hisatsugu; Toshimitsu, Akio; Kondo, Teruyuki; Heterocycles; vol. 90; 2; (2015); p. 857 – 865;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 148017-28-1, name is tert-Butyl sulfamoylcarbamate, A new synthetic method of this compound is introduced below., 148017-28-1

Example 16 N-(4-{4-[3-(2-sulfamoylaminoethoxy)azetidin-1-yl]phenylamino}-6-methoxypyridin-3-yl)acetamide (16a) N-(4-{4-[3-(2-tert-butoxycarbonylsulfamoylaminoethoxy)azetidin-1-yl]phenylamino}-6-methoxypyridin-3-yl)acetamide N-(4-{4-[3-(2-Hydroxyethoxy)azetidin-1-yl]phenylamino}-6-methoxypyridin-3-yl)acetamide (850 mg, 2.28 mmol) produced in Example 1 (1f), N-tert-butoxycarbonylsulfamoyl amine (0.67 g, 3.4 mmol), and triphenylphosphine (0.72 g, 2.7 mmol) were suspended in ethyl acetate:tetrahydrofuran (3:1, 15 mL), diethyl azodicarboxylate (0.74 mL, 3.4 mmol) was added, and the mixture was stirred at room temperature for 20 hr. The solvent of the reaction mixture was evaporated under reduced pressure, and the obtained residue was purified by silica gel column chromatography (chloroform:methanol, 100:0?100:4, V/V). The solvent of the object fraction was evaporated under reduced pressure to give the title object compound as a pale-yellow foam-like powder (1.05 g, yield 84%). 1H-NMR (CDCl3, 400 MHz) delta: 1.55 (9H, s), 1.96 (1H, s), 2.24 (2H, s), 3.61 (2H, t, J=5.3 Hz), 3.66-3.74 (2H, m), 3.82 (2H, s), 3.85 (1H, s), 3.98 (2H, t, J=5.3 Hz), 4.00-4.08 (2H, m), 4.38-4.46 (1H, m), 5.44-5.55 (2H, br), 6.10 (0.35H, s), 6.12 (0.35H, s), 6.15 (0.65H, s), 6.34 (0.65H, s), 6.41-6.50 (2H, m), 6.54 (0.65H, s), 6.98-7.07 (2.35H, m), 7.78 (0.65H, s), 7.79 (0.35H, s).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Kyoto Pharmaceutical Industries, Ltd.; SHIRAHASE, Hiroaki; TAKAHASHI, Kenji; SHOJI, Yoshimichi; TAKEDA, Shigemitsu; (111 pag.)US2016/207883; (2016); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics