Amides-buliding-blocks

Reference of 154350-29-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 154350-29-5, name is Cyclopropanesulfonamide belongs to amides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

Step 7: Synthesis of (IS, 4R, 6S, 14S, 18R)- [7-cis-4-Cyclopropanesulfonylaminocarbonyl-12-cyclopropyl-18-(tert-butyldimethylsilyloxy)- 2, 15-dioxo-3, 12,16-triaza-tricyclo[14.3.0. (f’6]nonadec-7 -en-14-yl] carbamic acid, tert-butyl ester.; (15, AR, 65, 145, 18R)-7-c-14-tert-Butoxycarbonylamino-18-(tert- butyldimethylsilyloxy)-2,15-dioxo-3, 12,16-triazatricyclo[ 14.3.0.04’6]nonadec-7-ene- 4-carboxylic acid (490 mg, 0.79 mmol) was dissolved in 15 mL of THF and treated with CDI (179 mg, 1.10 mmoL). (Care was taken to avoid moisture by using oven dried glassware and maintaining a dry N2 atmosphere.) After refluxing the reaction mixture for two hours, it was cooled to rt and treated sequentially with cyclopropylsulfonamide (134 mg, 1.10 mmoL) and DBU (168 mg, 1.10 mmoL). After stirring overnight at rt, the THF was removed by rotary evaporation. The residue was dissolved in water and IN HCl was added until the pH = 5. This aqueous solution was extracted with EtOAc (3x). The combined EtOAc extracts were dried (MgSO4) and concentrated in vacuo to give the crude product. Purification by flash column, eluting with 3percent methanol in methylene chloride, gave 300 mg (53percent) Of (IS”, 4R, 65, 145, 18R)- [7-c-4-Cyclopropanesulfonylaminocarbonyl-12- cyclopropyl- 18-(tert-butyldimethylsilyloxy)-2, 15 -dioxo-3 ,12,16-triaza- tricyclo[14.3.0.04’6]nonadec-7-en-14-yl]carbamic acid, tert-butyl ester as a white solid: LC-MS (Phenomenex 10 mum Cl 8 HPLC column: 3.0×50 mm length. Gradient: 100percent Solvent A/0percent Solvent B to 0percent Solvent A/100percent Solvent B. Gradient time: 2 min. Hold time: 1 min. Flow rate: 5 mL/min. Detector Wavelength: 220 nM. Solvent A: 10percent MeOH / 90percent H2O / 0.1percent TFA. Solvent B: 10percent H2O / 90percent MeOH / 0.1percent TFA.) (Retention time: 2.40 min), MS m/z 724 (M++l).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Cyclopropanesulfonamide, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; WO2008/64061; (2008); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Reference of 154350-29-5, The chemical industry reduces the impact on the environment during synthesis 154350-29-5, name is Cyclopropanesulfonamide, I believe this compound will play a more active role in future production and life.

To a solution of cyclopropanesulfonamide (6 g, 50 mmol) in DCM (50 ml) were added triethylamine (7.5 ml, 74 mmol) followed by DMAP (0.3 g, 7.5 mmol) and di-tert-butyl dicarbonate (13 g, 59 ml) and the reaction was left stirring overnight. The solvent was removed; water, 2N HCl (40 ml) and ethyl acetate were added. The organic layer was washed with brine, dried over magnesium sulfate and evaporated to give Boc-cyclopropanesulfonamide as a white solid, used on the next step without further purification. Yield 9.73 g (88percent).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Cyclopropanesulfonamide, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; INTERMUNE, INC.; US2011/82182; (2011); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Some common heterocyclic compound, 1129-26-6, name is 4-Methoxybenzenesulfonamide, molecular formula is C7H9NO3S, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Quality Control of 4-Methoxybenzenesulfonamide

General procedure: Under the argon atmosphere, a Schlenk tube (15 mL) equipped with a magnetic bar was loaded with the sulfonamide 1 (0.5 mmol), sodium arylsulfinates 2 (0.6 mmol, 1.2 equiv.), Pd(MeCN)2Cl2 (6.5 mg, 5 mol%) and AgOAc (166.9 mg, 1.0 mmol) in one portion. Then, the mixture of 1,4-dioxane/DMSO (3.5 mL in a 9:1 ratio) was added to obtain a clear solution and the reaction mixture was allowed to stir at 120 C for 24 h. After cooling to room temperature, the mixture was filtered through a short celite pad and washed with dichloromethane (15 mL 3). The filtrate was concentrated and the oily crude product was purified by column chromatography using silica gel (200-300 mesh) as stationary phase and a petroleum ether and ethyl acetate (3/1) as eluent to give the N-aryl sulfonamides 3 in noted yields.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1129-26-6, its application will become more common.

Reference:
Article; Zhao, Zijian; Lian, Yan; Zhao, Chang; Wang, Bing; Synthetic Communications; vol. 48; 12; (2018); p. 1436 – 1442;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Electric Literature of 201162-53-0,Some common heterocyclic compound, 201162-53-0, name is 3-Boc-3,8-Diazabicyclo[3.2.1]octane, molecular formula is C11H20N2O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of /er/-butyl 3,8-diazabicyclo[3.2. l]octane-3-carboxylate (1.0 equiv) and DIEA (2.0 equiv) in dry DCM at 0C was added BrCN (1.5 equiv). The mixture was stirred at 0C for lh and then at rt overnight. The reaction mixture was washed with water and brine to afford /c/7-butyl 8-cyano-3,8-diazabicyclo[3.2.l]octane-3-carboxylate which was used without further purification.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 3-Boc-3,8-Diazabicyclo[3.2.1]octane, its application will become more common.

Reference:
Patent; ESCALIER BIOSCIENCES B.V.; MOHAN, Raju; NUSS, John; HARRIS, Jason; YUAN, Shendong; (144 pag.)WO2019/177996; (2019); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Synthetic Route of 4793-24-2, These common heterocyclic compound, 4793-24-2, name is 2-Chloro-4-fluoro-5-sulfamoylbenzoic acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Compound 1 was dissolved in 1 mL of compound 2 and heated to 10OC and monitored by TLC until complete. When complete, as indicated by TLC, the reaction was removed from the heat. A pale yellow goo remained, containing crystals. To this mixture was added IM HCl and this stirred for 10 min. At this time, a precipitate fell out of solution that was subsequently filtered to yield the pure product as indicated by NMR.IH NMR: 8.25 (s, IH), 7.5-7.2 (m, 5H), 6.71 (s, IH), 4.54 (s, 2H), 4.0 (s, IH), 3.3 (s, 2H).Ms API-ES Neg. Scan calculated for C14H12C1N2O4S- 339.02. ; obtained 339.2

The synthetic route of 4793-24-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; FLYNN, Gary, A.; YOOL, Andrea, J.; MIGLIATI, Elton, Rodrigues; RITTER, Leslie, S.; WO2008/52190; (2008); A2;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Reference of 703-12-8, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 703-12-8 name is 4-Bromo-N-methylbenzenesulfonamide, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

Step b: 4-(lambdar-Methylsulfamoyl)phenylboronic acid; To a solution of 4-bromo-iV-methyl-benzene sulfonamide (24.9 g, 0.1 mol) and B(O1Pr)3 (28.2 g, 0.15 mol) in THF (200 mL) was added n-BuLi (100 mL, 0.25 mol) at -70 0C. The mixture was slowly warmed to 0 0C, then 10% HCl solution was added until pH 3-4. The resulting mixture was extracted with EtOAc. The organic layer was dried over Na2SO4, and evaporated under reduced pressure to give 4-(iV-methylsulfamoyl)phenylboronic acid (22.5 g, 96%), which was used in the next step without further purification. 1H NMR (DMSO-J6, 300 MHz) delta 8.29 (s, 2 H), 7.92 (d, J = 8.1 Hz, 2 H), 7.69 (d, J = 8.4 Hz, 2 H), 2.36 (d, J = 5.1 Hz, 3 H).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 4-Bromo-N-methylbenzenesulfonamide, and friends who are interested can also refer to it.

Reference:
Patent; VERTEX PHARMACEUTICALS INCORPORATED; WO2007/56341; (2007); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Application of 16313-66-9,Some common heterocyclic compound, 16313-66-9, name is 2-Amino-5-bromobenzamide, molecular formula is C7H7BrN2O, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of 2-amino-5-bromo-benzamide (29.2 g, 136 mmol) andtriethylamine (25.0 mL, 173 mmol) in THF (500 mL) was added dropwise o-anisoyl chloride (24.0 g, 140 mmol). Stirring at room temperature was continued for 3 h, after which the formed precipitate was filtered and washed once with THF and twice with dichloromethane yielding 2-(o-anisoyl)-amino-5-bromo-benzamide (51.4 g, 84%) with 1 equivalent of triethylamine hydrochloride.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2-Amino-5-bromobenzamide, its application will become more common.

Reference:
Patent; VERTEX PHARMACEUTICALS INCORPORATED; WO2006/28904; (2006); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Application of 40724-47-8,Some common heterocyclic compound, 40724-47-8, name is 4-Bromomethylbenzenesulfonamide, molecular formula is C7H8BrNO2S, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

4-Azidomethyl-benzenesulfonamide (INT-2); To a stirred solution of 4-bromomethyl-benzenesulfonamide (4.500 g,17.9917 mmol) (prepared from 4-bromomethyl-benzenesulfonyl chloride upon treatment with ammonia (as described by Yee YK et al. in Journal of Medicinal Chemistry 1990 33 (9) 2437-2451 ) in lambda/,lambda/-dimethylformamide (30 ml), sodium azide is added (1 1 .696 g, 179.917 mmol) and the reaction mixture is heated at 900C for 14 hours under a nitrogen atmosphere. The suspension is filtered, to remove the excess of sodium azide, and the solid residue is washed with ethyl acetate (4 x 50 ml). The mother liquids are concentrated, to afford a crude yellow liquid (3.820 g, 100% mass balance), that is used as such for the next step. IR: 2098.8 cm”1.

The synthetic route of 40724-47-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; NEUROSEARCH A/S; WO2009/112459; (2009); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Reference of 6325-93-5,Some common heterocyclic compound, 6325-93-5, name is 4-Nitrobenzenesulfonamide, molecular formula is C6H6N2O4S, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: The catalytic reduction of nitro aromatics was conducted in a 25 mlTelfon-lined stainless steel autoclave with magnetic stirring. In a typicalprocess, 6 mmol nitroarene, and desired amounts of reducing agent andsolvents were introduced in the reactor. The autoclave was transferredinto a water bath at the set temperature with an accuracy of better than0.2 C for ?0.5 h. Then, 10 mg catalyst was added into the reactionmixture and started the reduction at a stirring rate of 450 rpm. After thereaction, the catalyst was rapidly separated by ltration. n-Decane(500 muL) as standard was added into the ltrate and was dried withanhydrous Na 2 SO 4 . The products were analyzed by gas chromato-graphy-mass spectrometry (GC-MS) (Shimadzu GCMS-QP2010 Plus)and GC (Varian CP-3800) with a capillary column (column VF-1 ms,15 m, 0.25 mm, 0.25 mum) and a ame ionization detector (FID).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4-Nitrobenzenesulfonamide, its application will become more common.

Reference:
Article; Huang, Haigen; Liang, Xiangcheng; Wang, Xueguang; Sheng, Yao; Chen, Chenju; Zou, Xiujing; Lu, Xionggang; Applied Catalysis A: General; vol. 559; (2018); p. 127 – 137;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Electric Literature of 67442-07-3, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 67442-07-3 as follows.

To a THF solution of (S)-1-bromo-2-methyloxy-3-(1-methyloxyheptyl)benzene (9, 12.5 g) obatined in the second step was added dropwise a 2M isopropyl magnesium chloride THF solution (44 mL) under ice-cooling. After the reaction solution was stirred at 45°C for 3 hours, N-methyloxy-N-methyl-2-chloroacetamide(10, 3.5 g) was added under ice-cooling, and the mixture was stirred at room temperature for 1 hour. The reaction solution was extracted with ethyl acetate, and purified by silica gel chromatography to obtain (S)-2-chloro-1-(2-methyloxy-3-(1-methyloxyheptyl)phenyl)ethanone (11). NMR (CDCl3) delta ppm: 0.87 (3H, t, J = 6.8 Hz), 1.2 – 1.82 (10H, m), 3.22 (3H, s), 3.78 (3H, s), 4.53 (1H, m), 4.73 (2H, m), 7.24 (1H, t, J = 7.6Hz), 7.52 (1H, dd, J = 7.6 Hz, J = 1.8 Hz), 7.60 (1H, dd, J = 7.7 Hz, J = 1.8Hz)

According to the analysis of related databases, 67442-07-3, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Shionogi&Co., Ltd.; EP2184279; (2010); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics