Amides-buliding-blocks

Synthetic Route of 2675-89-0, The chemical industry reduces the impact on the environment during synthesis 2675-89-0, name is 2-Chloro-N,N-dimethylacetamide, I believe this compound will play a more active role in future production and life.

General procedure: To a suspension of NaH (344 mg, 60% dispersion in mineral oil) in THF (17 mL) was added allyl alcohol (2) (500 mg, 8.6 mmol) at 0 C. After 1 h at the same temperature, chloroacetamide 1 (0.97 mL, 9.5 mmol) was added and the mixture was stirred for 24 h. The mixture was quenched with saturated aqueous NH4Cl and concentrated at reduced pressure. The resulting residue was dissolved in EtOAc and washed with water and brine. The organic layer was dried over anhydrous MgSO4 and concentrated in vacuo. The residue was purified by flash column chromatography on silica gel (hexanes/EtOAc, 3:1) to give 6a (1.05 g, pale yellow oil) in 85% yield.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Chloro-N,N-dimethylacetamide, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Yun, Jeong In; Kim, Hyoung Rae; Kim, Sang Kyum; Kim, Deukjoon; Lee, Jongkook; Tetrahedron; vol. 68; 4; (2012); p. 1177 – 1184;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Some common heterocyclic compound, 688790-06-9, name is 7-tert-Butyl 2-methyl 7-azabicyclo[2.2.1]heptane-2,7-dicarboxylate, molecular formula is C13H21NO4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Product Details of 688790-06-9

A solution of 4M HCl in dioxane (100 mL, 400 mmol, 3.0 eq) was slowly added to a stirred solution of 7-tert-butyl 2-ethyl 3-bromo-7-azabicyclo[2.2.1]heptane-2,7-dicarboxylate (20.0 g, 74.3 mmol, 1.0 eq) in dioxane (400 mL) at 0 C and the reaction mixture was stirred at room temperature for 2 h. After completion of the reaction (monitored by TLC, 30% ethyl acetate-hexane, R = 0.01), solvent was removed under reduced pressure and the residue was dried under vacuum to afford ethyl 7-azabicyclo[2.2.1]heptane-2-carboxylate HC1 (12.0 g, 96%) as a yellow sticky mass. LCMS m/z = 156.12 (M+l); crude purity by 1H NMR -90%. [

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 688790-06-9, its application will become more common.

Reference:
Patent; INNOV 17 LLC; TILLEY, Jefferson; BLINN, James; GAWECO, Anderson; (93 pag.)WO2016/14918; (2016); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Some common heterocyclic compound, 209917-48-6, name is N-tert-Butyl 4-Aminophenylsulfonamide, molecular formula is C10H16N2O2S, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. SDS of cas: 209917-48-6

Step 3; To a mixture of 4-amino-N-tert-butylbenzenesulfonamide (180 mg, 0.788 mmol, from step 2) and 3,3-dimethyl-2-oxobutanoic acid (308 mg, 2.4 mmol) in a 100 ml RBF at RT was added tetraisopropoxytitanium (2 ml,) via a pipet. The color of the mixture soon changed into a characteristic canary color. The solution was warmed to 75 C. for about 15 minutes and the color remained the same. The solution was diluted with absolute ethanol (8 ml) at RT, followed by the addition of 1.5× of sodium cyanotrihydroborate (245 mg, 3.90 mmol), and the remaining half after the bubbling and sizzling was over. The color of the solution became lighter. The solution was mixed with 4 mL of water, forming a suspension, and the white PPT was removed by centrifuge. The organic was extracted into ethyl acetate, and the organic phase was dried over Na2SO4, filtered, and evaporated to dryness. A yellow oil was obtained and was used directly in the next step without further purification. LC-MS, MS m/z 343 (M++H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 209917-48-6, its application will become more common.

Reference:
Patent; Bristol-Myers Squibb Company; US2008/119461; (2008); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 121492-06-6, name is N-Boc-(2-Aminoethyl)-N-methylamine belongs to amides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. Formula: C8H18N2O2

General procedure: To a solution of compound 101-1a or 101-1b (crude, calculated as 1.0 mmol) in DCM (20 mL) were added diamine 101-2(a, b, c, or d) (1.1 mmol) and DMAP (0.1 mmol). The reaction mixture was stirred at RT for 4 hours before TFA (1 mL) was added into. The mixture was stirred at RT for half an hour (for R13 = Boc, the reaction was stirred until Boc was totally removed, which monitored by LCMS). The resulting mixture was concentrated in vacuo and the residue was purified by reversed phase flash chromatography (50-80% acetonitrile in aq. TFA (0.5%)) to give compound 101(a, b, c, or d) as colorless oil. Following the general procedure and using compound 101-1a with Boc-diamine 101-2a, compound 101a (0.38 g, 57% in 2 steps, TFA salt) was obtained as colorless oil. ESI m/z: 567 (M + H)+.

The synthetic route of 121492-06-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; REGENERON PHARMACEUTICALS, INC.; HAN, Amy; (329 pag.)WO2019/136487; (2019); A2;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Electric Literature of 16982-21-1, These common heterocyclic compound, 16982-21-1, name is Ethyl 2-amino-2-thioxoacetate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a stirred solution of 2-bromo-1-(4-nitrophenyl)ethanone(9.2 g, 37.7 mmol, 1.0 equiv) in methanol (200 ml) was added ethyl 2-amino-2-thioxoacetate (5.0 g, 37.7 mmol, 1.0 equiv) and reaction mixture was refluxed for 2 h. Following reaction completion the reaction mass was cooled to rt and the precipitated solid was filtered, washed with cold methanol, and dried to yield (7.1 g, 67%)of the title compound as a white solid.

The synthetic route of 16982-21-1 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Kadam, Kishorkumar S.; Jadhav, Ravindra D.; Kandre, Shivaji; Guha, Tandra; Reddy, M. Mahesh Kumar; Brahma, Manoja K.; Deshmukh, Nitin J.; Dixit, Amol; Doshi, Lalit; Srinivasan, Shaila; Devle, Jayendra; Damre, Anagha; Nemmani, Kumar V. S.; Gupte, Amol; Sharma, Rajiv; European Journal of Medicinal Chemistry; vol. 65; (2013); p. 337 – 347;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Electric Literature of 4815-28-5, The chemical industry reduces the impact on the environment during synthesis 4815-28-5, name is 2-Amino-4,5,6,7-tetrahydro-1-benzothiophene-3-carboxamide, I believe this compound will play a more active role in future production and life.

General procedure: A mixture of 2-amino-4, 5, 6, 7-tetrahydrobenzo[b]thiophene-3-carboxamide 1b (1.0 mmol), ketones 2 (1.0 mmol) and InCl3 (10%, w/w) in acetonitrile (6 mL) was stirred at room temperature for the time indicated in Table. After completion of the reaction (indicated by TLC) the reaction mixture was filtered to remove the insoluble catalyst and wash with acetonitrile (2 X 5mL). The filtrate was collected and concentrated under vacuum. The solid isolated was triturated in MTBE (10 mL), filtered and dried to give the desired product.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Amino-4,5,6,7-tetrahydro-1-benzothiophene-3-carboxamide, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Ismail; Kuthati, Bhaskar; Thalari, Gangadhar; Bommarapu, Venkatesham; Mulakayala, Chaitanya; Chitta, Suresh Kumar; Mulakayala, Naveen; Bioorganic and Medicinal Chemistry Letters; vol. 27; 6; (2017); p. 1446 – 1450;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Related Products of 67442-07-3, The chemical industry reduces the impact on the environment during synthesis 67442-07-3, name is 2-Chloro-N-methoxy-N-methylacetamide, I believe this compound will play a more active role in future production and life.

To a solution of trimethylsulfonium iodide (41.51 g, 203.9 mmol) in THF (335.3 mL)at -30 °C was added lithium bis(trimethylsilyl)amide (1M in heptane, 203.9 mL, 203.9mmol) portionwise over 45 mills. After stirring for 30 mins, 3,3,3-trifluoro-1,2- epoxypropane (14 g, 124.9 mmol) was added at -20 °C over 15 mill, and the mixture was allowed to warm to RT and stirred for 3 h and 10 mm. The slurry was then added portionwise to an ice-cold solution of 2-chloro-N-methoxy-N-methylacetamide (28.05g, 203.9 mmol) in NMP (75.7 mL). The resulting mixture was allowed to warm to RT and stirred for 1 day before dilution with EtOAc. The organic layer was washed with NaHCO3 (sat. aq. sol.) and the washings extracted with EtOAc. The organic layers were combined, dried (MgSO4) and evaporated. The residue was purified by column chromatography (silica gel; n-heptane/EtOAc 100/0 to 70/30) to yield 1-1 (13.8 g,49percent).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Chloro-N-methoxy-N-methylacetamide, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; VAN BRANDT, Sven, Franciscus, Anna; GIJSEN, Henricus, Jacobus, Maria; ROMBOUTS, Frederik, Jan, Rita; (134 pag.)WO2018/83247; (2018); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 4141-08-6, name is 2-Amino-N-methylbenzamide, A new synthetic method of this compound is introduced below., HPLC of Formula: C8H10N2O

General procedure: For the 5-subsititution was H, F or Cl, the procedure was as follows: A mixture of compound 7 (0.79 g, 5.25 mmol), 5-substituted-2,4-dichloropyrimidine (5 mmol) and DIPEA (1.05 mL,6 mmol) in i-PrOH was heated under reflux for 6 h.Water (100 mL)was added and the solid was filtered off, washed with water and driedto obtain compounds 10a-10c. For the 5-subsititution was methyl or methoxy, the procedure was as follows: To a mixture of compound 7 (1.26 g, 8.4 mmol) and5-substituted-2,4-dichloropyrimidine (8 mmol) was added NaH (60%, 0.38 g, 9.6 mmol) in DMF (6 mL) under ice bath. Then the mixture was stirred for 24 h at room temperature.Water was added dropwise to stop the reaction. The reaction mixture was extracted withdichloromethane (20 mL x 3), and the combined organic layer waswashed with brine (15mL x 2), dried over anhydrous Na2SO4 and concentrated under vacuum to afford the crude product. The residue was purified by column chromatography to obtain compound 10d and 10e.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Su, Yue; Li, Ridong; Ning, Xianling; Lin, Zhiqiang; Zhao, Xuyang; Zhou, Juntuo; Liu, Jia; Jin, Yan; Yin, Yuxin; European Journal of Medicinal Chemistry; vol. 177; (2019); p. 32 – 46;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Electric Literature of 147751-16-4, These common heterocyclic compound, 147751-16-4, name is tert-Butyl methylsulfonylcarbamate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Boc-N-methanesulfonamide (11.0 g, 56.3 mmol), trimethylphosphine (56.1 mL of a 1.0 M solution in tetrahydrofuran, 56.1 mmol), and a 40 wt. % solution of diethyl azodicarboxylate in toluene (25.6 mL, 56.0 mmol) were added sequentially to a solution of (4-benzylsulfanyl-5-nitro-thiophen-3-yl)-methanol (10.52 g, 37.4 mmol) in tetrahydrofuran (300 mL) at 25 C. The mixture was stirred for 3.5 h at 25 C., and then was concentrated in vacuo. Purification of the residue by flash column chromatography (Merck silica gel 60, 40-63 mum; 20% ethyl acetate in hexanes) afforded the desired product, Boc-N-(4-benzylsulfanyl-5-nitro-thiophen-3-ylmethyl)-methanesulfonamide (9.79 g, 21.3 mmol, 57%), as a dark brown oil. 1H NMR (400 MHz, CDCl3) delta: 1.50 (9H, s), 3.29 (3H, s), 4.19 (2H, s), 4.68 (2H, s), 7.15-7.18 (2H, m), 7.22-7.25 (3H, m), 7.40 (1H, s).

The synthetic route of 147751-16-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Anadys Pharmaceuticals, Inc.; US2012/316156; (2012); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Synthetic Route of 2360-20-5,Some common heterocyclic compound, 2360-20-5, name is 3,4-Diaminobenzenesulfonamide, molecular formula is C6H9N3O2S, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Benzaldehyde (73 muL, 0.72 mmol, 1 eq) was dissolved in EtOH (2-5 mL), and sodium metabisulfite (205 mg, 1.08 mmol, 1.5 eq) in H2O (1-2 mL) was added in dropwise. The reaction mixture was stirred at rt overnight. Reaction mixture was diluted with EtOH, cooled and formed precipitate was filtered and dried (128 mg). The mixture of this salt (124.6 mg, 0.596 mmol, 1.5 equiv) and 3-amino-4-(methylamino) benzenesulfonamide (3) (80 mg, 0.397 mmol, 1 equiv) in 5 mL DMF was heated at 60? for 6 h. Reaction mixture was diluted with water and formed precipitate was filtered. The crude product was purified by flash chromatography on silica gel (12 g), eluting with a gradient of 0-11% MeOH in DCM to give 4a (74.5 mg, 64.8% yield) as a white powder. Mp 266-268.6 C. 1H NMR (400 MHz, DMSO-d6): delta 3.92 (3H, s), 7.32 (2H, s), 7.58-7.60 (3H, m), 7.76-7.81 (2H, m), 7.85-7.88 (2H, m), 8.14 (1H, s); 13C NMR (100 MHz DMSO-d6): delta 32.05, 111.05, 116.93, 119.93, 128.75, 129.41, 129.48, 130.12, 138.25, 138.45, 141.53, 155.41; HRMS m/z calculated for C14H13N3O2S [M+H]+ 288.0807, found: 288.0794.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 3,4-Diaminobenzenesulfonamide, its application will become more common.

Reference:
Article; Cal??kan, Burcu; Banoglu, Erden; Guer Maz, Tu?ce; Nocentini, Alessio; Supuran, Claudiu T.; Uslu, Azize Gizem; Bioorganic Chemistry; vol. 95; (2020);,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics