Tag: M.W=100-200

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 84713-20-2, name is Benzyl vinylcarbamate, A new synthetic method of this compound is introduced below., Formula: C10H11NO2

General procedure: Unless otherwise noted, the General Experimental Procedure was described as follows: To a solution of enecarbamate/enamide 1 (0.2 mmol) in alcohol (2.0 mL) was added the BNDHP (1.4 mg, 0.002 mmol), and the reaction mixture was stirred at 25 oC. When the starting materials disappeared with the inspection by TLC, the solvent was removed under reduced pressure. The residue was purified by flash column chromatography on silica gel eluting with petroleum ether/EtOAc to afford the product 2. S3

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Chang-Fei, Zhang; Wei, Zou; Xiao-Yan, Ma; Xinjun, Hu; Yanli, Li; Tetrahedron; vol. 76; 16; (2020);,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 16066-84-5, name is tert-Butyl methylcarbamate, A new synthetic method of this compound is introduced below., Quality Control of tert-Butyl methylcarbamate

A solution of aniline (0.911 mL, 10.0 mmol) and di-tert-butyl dicarbonate (2.34 mL, 10.2 mmol) in THF(5.0 mL) was stirred for 1 h at room temperature. The resulting mixture was concentrated to obtain N-tert-butoxycarbonylaniline(10) (2.03 g, quant.) as colorless crystals. The crude product was used without purification. (Step 2) A solution of 10 (545 mg, 2.82 mmol) and (Z)-1-bromo-4-methoxybut-2-ene (11) (422 mg,2.56 mmol) in DMF (8.5 mL) was treated with sodium hydride (60 wt.% in oil, 154 mg, 3.85 mmol) at 0 C. The resulting mixture was stirred for 1 h at 50 C and quenched with saturated aqueous ammonium chloride at 0 C.Extractive workup and purification of the residue by chromatography on silica gel (hexane/ethyl acetate = 5/1 asthe eluent) afforded (Z)-tert-butyl (4-methoxybut-2-en-1-yl)(phenyl)carbamate (12) (654 mg, 92% yield) as acolorless oil. (Step 3) A solution of diisopropylamine (484 L, 3.45 mmol) in THF (4.2 mL) was treated with a1.6 M n-butyllithium hexane solution (2.30 mL, 3.7 mmol) at 0 C under an argon atmosphere and the mixture was stirred for 30 min at the same temperature. A solution of 12 (649 mg, 2.34 mmol) in THF (7.5 mL) was added to the solution at 0 C and the mixture was stirred for 3 h at the same temperature. The resulting mixturewas quenched with saturated aqueous ammonium chloride and extracted with ethyl acetate. The combined extracts were washed with brine, dried over sodium sulfate, and concentrated. The residue was purified bychromatography on silica gel (hexane/ethyl acetate = 20/1 as the eluent) to give 2f (516 mg, 90% yield)

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Tayama, Eiji; Horikawa, Kouki; Iwamoto, Hajime; Hasegawa, Eietsu; Tetrahedron Letters; vol. 55; 19; (2014); p. 3041 – 3044;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 198967-24-7, name is 2-Fluoro-N-methoxy-N-methylbenzamide, This compound has unique chemical properties. The synthetic route is as follows., COA of Formula: C9H10FNO2

Example 48: 4-tert-Butyl-N-[5-chloro-2-(2-fluoro-benzoyi)-pyridin-3-yl]- benzenesulfonamide; [00439] N-(2-Bromo-5-chloro-pyridin-3-yl)-4-tert-butyl-N-methoxymethyl- benzenesulfonamide (140 mg, 300 mmol) was placed in a dry 2-neck 10 mL round-bottom flask. The flask was evacuated and purged with nitrogen, followed by the addition of THF (1 mL). The homogeneous mixture was lowered to -5 C and /PrMgCI (0.33 mL, 2.0 M) was added dropwise. Upon completion of the addition, the reaction was stirred 90 minutes, followed by the slow addition of 2- fluoro-N-methoxy-N-methyl-benzamide (140 mg, 750 mmol). The reaction was stirred overnight, during which the ice-bath warmed to room temperature. The following day, the reaction was quenched with a small quantity of MeOH and the solvents evaporated in vacuo. The residue was subsequently treated with 4.0 M HCI (in dioxane) (1 mL, 4.0 mmol) and H2O (0.33 mL), and then stirred at 80 C for two hours. The resultant solution was diluted with EtOAc, washed with water, saturated sodium bicarbonate, and brine; dried with MgSO4, and evaporated employing reduced pressure. The crude sulfonamide was finally purified via preparatory TLC (20% EtOAc/hexanes) and recrystallization from MeCN/H2O to afford 98 mg of the title compound: 1H NMR (400 MHz, CDCI3) delta 10.6 (s, 1 H), 8.3 (d, 1H), 8.2 (d, 1H), 7.74 (d, 2H), 7.6 (d, 1 H), 7.5 (d, 1 H), 7.43 (d, 2H), 7.42-7.37 (m, 2H), 1.26 (s, 9H); MS (ES) M+H expect 447.1 , found 447.5.

According to the analysis of related databases, 198967-24-7, the application of this compound in the production field has become more and more popular.

Reference:
Patent; CHEMOCENTRYX, INC.; WO2006/76644; (2006); A2;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 67442-07-3, name is 2-Chloro-N-methoxy-N-methylacetamide, This compound has unique chemical properties. The synthetic route is as follows., Recommanded Product: 67442-07-3

To a 10L four necked flask was charged l-Isopropyl-3-methyl-lH-l,2,4-triazole 7 (400 g) in THF (2.5 L). The resulting solution was cooled to -40 C and 2.5 M n-butyllithium BuLi in n- hexanes (1.41 L) was added while keeping the internal temp, below -20C. The resulting yellow suspension was stirred at -40C for 1 hour before being transferred. To a 20L flask was charged 2-chloro-N-methoxy-N-methylacetamide 10 (485 g) in THF (4 L). The resulting solution was cooled to -40 C at which point a white suspension was obtained, and to this was added the solution of lithiated triazole 7 keeping the internal temp, below -20C. At this point a yellow orange solution was obtained which was stirred at – 30C for lhour. Propionic acid (520 mL) was added keeping the internal temp, below -20C. The resulting off-white to yellowish suspension was warmed to -5 C over 30 minutes. Citric acid (200 g) in water (0.8 L) was added and after stirring for 5 minutes a clear biphasic mixture was obtained. At this point stirring was stopped and the bottom aqueous layer was removed. The organic phase was washed with 20w% K3PO4 solution (1 L), 20w% K2HP04 solution (2 L), and 20w% NaCl solution (1 L). The organics was reduced to ca 4L via distillation under vacuum to afford 2-chloro-l-(l-isopropyl-3- methyl-lH-l,2,4-triazol-5-yl)ethanone 13 as a dark amber liquid which was used “as is” in the next step.

According to the analysis of related databases, 67442-07-3, the application of this compound in the production field has become more and more popular.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; GENENTECH, INC.; ANGELAUD, Remy; BEAUDRY, Danial; CARRERA, Diane; MALHOTRA, Sushant; REMARCHUK, Travis; ST-JEAN, Fredric; WO2014/140073; (2014); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

518057-72-2, name is 5-Amino-2-fluorobenzamide, belongs to amides-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. name: 5-Amino-2-fluorobenzamide

A solution of 5-amino-2-fluoro-benzamide (30 mg, 0.19 mmol) and diisopropylethylamine (100 mu, 0.5766 mmol) in tetrahydrofuran (1 mL) at 0 C was added to a slurry of 2-[2-methoxy-4- (trifluoromethoxy)phenoxy]-5-(l, l,2,2,2-pentafluoroethyl)benzoyl chloride (89 mg, 0.19 mmol) in tetrahydrofuran (1 mL) slowly at 0 C and the reaction was stirred at room temperature for 4 hours. The solvent was evaporated by blowing down with nitrogen. The crude product was dissolved in DMSO, filtered and purified by reverse phase HPLC to yield N-(3-carbamoyl-4-fluoro-phenyl)-2-[2-methoxy-4- (trifluoromethoxy)phenoxy]-5-(l, l,2,2,2-pentafluoroethyl)benzamide (25.7 mg, 23%). ESI-MS m/z calc. 582.08, found 583.0 (M+l)+; retention time (Method B): 2.04 minutes (3 minute run). NMR (400 MHz, DMSO-d6) delta 10.62 (s, 1H), 8.00 (dd, J = 6.5, 2.8 Hz, 1H), 7.91 (d, J = 2.4 Hz, 1H), 7.83 (ddd, J = 9.0, 4.4, 2.8 Hz, 1H), 7.78 – 7.62 (m, 3H), 7.44 (d, J = 8.8 Hz, 1H), 7.32 – 7.24 (m, 2H), 7.07 (ddd, J = 8.8, 2.8, 1.3 Hz, 1H), 6.87 (d, J = 8.8 Hz, 1H), 3.78 (s, 3H) ppm.

The synthetic route of 518057-72-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; VERTEX PHARMACEUTICALS INCORPORATED; AHMAD, Nadia; ANDERSON, Corey; ARUMUGAM, Vijayalaksmi; ASGIAN, Iuliana, Luci; CAMP, Joanne, Louise; FANNING, Lev Tyler, Dewey; HADIDA RUAH, Sara, Sabina; HURLEY, Dennis; SCHMIDT, Yvonne; SHAW, David; SHETH, Urvi, Jagdishbhai; THOMSON, Stephen, Andrew; (691 pag.)WO2019/14352; (2019); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 98-64-6 as follows. Recommanded Product: 98-64-6

General procedure: To a round-bottom flask (500 mL) that contained a solution of aryl sulfonamide (6 mmol), 4-dimethyaminopyridine (DMAP, 13 mmol), and 1-[3-(dimethyamino)-propyl]-3-ethylcarbodiimide hydrochloride (EDCI, 13 mmol) in CH2Cl2 (150 mL) was added the synthesized cinnamic acid (6 mmol) at room temperature. The resulting mixture was stirred at room temperature for 12 h, then cooled to 5 °C, and acidified to pH 1 with addition of HCl aqueous solution (10percent), which was followed by extraction with CH2Cl2/MeOH (9:1, 3 .x. 100 mL). The combined organic layers were washed with H2O and brine, dried over Na2SO4, and concentrated in vacuo. The residue was subjected to silica gel chromatography or crystallization if necessary to afford the compounds (9a-16e) (Scheme 1).

According to the analysis of related databases, 98-64-6, the application of this compound in the production field has become more and more popular.

Reference:
Article; Luo, Yin; Qiu, Ke-Ming; Lu, Xiang; Liu, Kai; Fu, Jie; Zhu, Hai-Liang; Bioorganic and Medicinal Chemistry; vol. 19; 16; (2011); p. 4730 – 4738;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Application of 588-46-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 588-46-5, name is N-Benzylacetamide belongs to amides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

Amide 1a (48 mg, 0.25 mmol, 1 equiv), and Selectfluor (221 mg, 0.625 mmol, 2.5 equiv) were dissolved in 5 mL of acetonitrile at room temperature, and CuBr (42.6 mg, 0.3 mmol, 1.2 equiv) was added over a 40 min period in six portions. After all CuBr was added, the resulting mixture was stirred for extra 20 min, and then acetonitrile was evaporated under reduced pressure. Then, 20 mL of a saturated ammonium chloride solution was added into the reaction mixture and extracted by diethyl ether (25 mL × 4), the ether layers were combined and dried over Na2SO4, filtered, and evaporated under reduced pressure to give the crude product. Silica gel flash chromatography of the crude product (hexanes-ethyl acetate (10:1) to hexanes-ethyl acetate (4:1)) yielded pure imide 2a (45 mg, 0.22 mmol, 88% yield) together with unreacted 1a (3.2 mg, 0.017 mmol, 7%).

The synthetic route of N-Benzylacetamide has been constantly updated, and we look forward to future research findings.

Reference:
Article; Jin, Zhuang; Xu, Bo; Hammond, Gerald B.; Tetrahedron Letters; vol. 52; 16; (2011); p. 1956 – 1959;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 98-64-6, name is 4-Chlorobenzenesulfonamide, A new synthetic method of this compound is introduced below., Quality Control of 4-Chlorobenzenesulfonamide

General procedure: The synthesis route of compounds 1-24 followed the general pathway outlined in Scheme 1. The substituted nicotinic acid (1 mmol) mixed with benzenesulfonamide (1 mmol) through by using 1-(3-Dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride (EDC*HCl) (1.2 mmol) and 4-dimethylaminopyridine (DMAP) (1.2 mmol) in anhydrous CH2Cl2 for 6-8 h at 70-80 °C. The reaction was monitored by TLC. The products are extracted with ethyl acetate. The extract is washed successively with 1 N HCl, water, 1 M NaHCO3, and water, dried over MgSO4, filtered and evaporated. The residue is purified by column chromatography using petroleum ether and ethyl acetate (1:1).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Zhang, Hui; Lu, Xiang; Zhang, Li-Rong; Liu, Jia-Jia; Yang, Xian-Hui; Wang, Xiao-Ming; Zhu, Hai-Liang; Bioorganic and Medicinal Chemistry; vol. 20; 4; (2012); p. 1411 – 1416;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Application of 17641-08-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 17641-08-6, name is 2-Chloro-N-(3-methoxyphenyl)acetamide belongs to amides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

General procedure: To the appropriate Schiff bases of isatin (10 mmol) in8-10 cm3 of anhydrous DMF, K2CO3 (15 mmol) was addedand stirred at room temperature for 1 h. After completion of1 h, the solution turned red brown in color. Appropriatechloroanilides (10 mmol) and KI (2 mmol) were then addedto this solution drop wise and heated at 60 C for 5.5-9 h.After conforming the end of reaction by TLC (ethyl acetate:n-hexane 30:70), the mixture was poured into ice cold water.Precipitated crude product was filtered and washed thoroughlywith cold water (3 9 200 cm3). Compounds wererecrystallized from ethanol/water mixture (1:1). Reactiontimes, melting points, and yields are depicted in Table 1.

The synthetic route of 2-Chloro-N-(3-methoxyphenyl)acetamide has been constantly updated, and we look forward to future research findings.

Reference:
Article; Debnath, Biplab; Ganguly, Swastika; Monatshefte fur Chemie; vol. 147; 3; (2016); p. 565 – 574;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 72179-84-1, name is (Methylsulfamoyl)amine belongs to amides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. Formula: CH6N2O2S

A solution of 8-Cyclohexyl-1,1a,2,12b-tetrahydro-11-methoxy-1a-(methoxycarbonyl)-cycloprop[d]indolo[2,1-a][2]benzazepine-5-carboxylic acid (140 mg, 0.31 mmol) and CDI (64 mg, 0.40 mmol) in THF (3 mL) was stirred for 1 hr at 60 C. N-methylsulfamide (68 mg, 0.62 mmol) and DBU (71.6 mg, 0.47 mmol) were added and the mixture was stirred at 60 C. overnight. The reaction was then poured into cold water, acidified with dilute hydrochloric acid and extracted into ethyl acetate. The extracts were washed sequentially with dilute hydrochloric acid (0.1 N), and brine, and then dried (anhy. sodium sulfate), filtered and evaporated to provide the title compound as a brown solid. ESI-MS m/e 552 (MH+). This material was used without further purification.

The synthetic route of 72179-84-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Bristol-Myers Squibb Company; US2009/130057; (2009); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics