Tag: M.W=100-200

Application of 1129-26-6,Some common heterocyclic compound, 1129-26-6, name is 4-Methoxybenzenesulfonamide, molecular formula is C7H9NO3S, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

At room temperature, the appropriate amount of organic solvent (volume ratio of 1: DMAC 2 and the mixture of PEG-200), add, Compounds 200mmol formula (II), 15mmol lOOmmol catalyst into the formula (I), (Three mistakes to 12mmol chloride (A1C13) and 3mmol zinc iodide (Znl2) mixture), 80mmol oxidant Phi (TFA) 2,20mmol lOOmmol additives of niobium pentachloride and trifluoromethanesulfonic acid; and then warmed to 80 C, and the reaction was stirred at this temperature for 2 hours;After the [0046] reaction, the reaction system was cooled to room temperature, followed by addition of a saturated aqueous solution of sodium thiosulfate was sufficiently washed with acetone was added and extracted 3 times, the combined organic phase was dried over anhydrous magnesium sulfate, and concentrated under reduced pressure , the residue by flash column chromatography on silica gel, ethyl acetate and an equal volume of petroleum ether mixture as eluent, to afford the compound of formula (III), in a yield of 96.9%

The synthetic route of 1129-26-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Zhang Wei; Zhang, Wei; (10 pag.)CN105294518; (2016); A;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Some common heterocyclic compound, 78191-00-1, name is N-Methoxy-N-methylacetamide, molecular formula is C4H9NO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Product Details of 78191-00-1

A suspension of 6-bromo-3-isopropyl[1 ,2,4]triazolo[4,3-a]pyridine hydrochloride (1.00 g, 3.62 mmoi) in THF (18.0 mL) was charged with a positive stream of nitrogen and cooled to 0 0C. The resulting suspension was then treated with commercially available solution of isopropylmagnesium chloride in diethyl ether (2.0 M THF solution, 3.5 mL, 7.0 mmol). The internal temperature of the reaction was not allowed to exceed 0 0C. The resulting dark solution was allowed to stir for 1 hour and then the reaction was treated with N-methoxy-N-methyl acetamide. After 4 hours, the reaction was quenched with 100 mL of saturated ammonium chloride solution and was extracted with ethyl acetate (3 X 250 mL). The resulting organic extract was Na2SO4 dried, filtered, and concentrated in vacuo to a residue that was directly subjected to normal phase silica chromatography (60 % ethyl acetate, 30 % hexanes, 10 % MeOH) to furnish a gum (743 mg, 85 %). 1H NMR (300 MHz, O4-MeOH) delta 9.02 (s, 1 H), 7.87 (dd, J= 9.7, 1.5 Hz, 1 H), 7.68 (dd, J= 9.6, 1.1 Hz, 1 H), 3.72 (septet, J = 6.8 Hz, 1 H), 2.68 (s, 3H), 1.51 (d, J= 6.8 Hz1 6H); LC/MS C-18 column, tr = 0.48 minutes (5 to 95% acetonitrile/water over 5 minutes at 1 ml/min with detection 254 nm, at 50 0C). ES-MS m/z 204 (M+H). ES-HRMS m/z 204.1158 (M+H calcd for C11H14N3O requires 204.1131).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 78191-00-1, its application will become more common.

Reference:
Patent; PHARMACIA & UPJOHN COMPANY LLC; WO2006/18735; (2006); A2;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Synthetic Route of 121492-06-6, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 121492-06-6 as follows.

202cU.l-dimethylethyl (2-{r8-(2,6-difluorophenylV4-r2-niethyl-S-(rr2- phenylethvPaminol carbonyllphenviy7-oxo-7,8-dihydrorhoyrido[23-cf1pyrimidin-2- yli amino } ethypmethylcarbamateTo the solution of 3-[8-(2,6-difluorophenyl)-2-(methylsulfmyi)-7-oxo-7,8- dihydropyrido[2,3-d]pyrimidin-4-yl]-4-methyl-N-(2-phenylethyl)benzainide (156 mg, 0.28 mmol) in dichloromethane (11 mL) was added 1,1-dimethylethyl (2- aminoethyl)methylcarbamate (75 muL, 0.42 mmol) and triethylamine (78.7 muL, 0.56 mmol). The reaction mixture was stirred at room temperature for 16 hours then applied to the flash chromatograph to afford the titled compound 147 mg (79 %). LC-MS m/z 669 (M + H)+; 1H-NMR (MeOD) 1.30 (m, 9 H), 2.31 (m, 3H), 2.65 (m, 2 H), 2.76 (m, 1 H), 2.92 (m, 2 H), 3.22 (m, 2 H), 3.45 (m, 1 H), 3.60 (m, 2 H), 6.35 (m, 1 H), 7.19 (m, 2 H), 7.26 (m, 5 H), 7.43 (m, 1 H), 7.49 (m, 1 H), 7.60 (m, 1 H), 7.74 (m, 1 H), 7.97 (m, 1 H).

According to the analysis of related databases, 121492-06-6, the application of this compound in the production field has become more and more popular.

Reference:
Patent; GLAXO GROUP LIMITED; WO2006/104915; (2006); A2;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Synthetic Route of 37045-73-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 37045-73-1, name is 3-(Methylsulfonamido)aniline belongs to amides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

4-Chloro-6,7-dimethoxy-quinazoline (100 mg, 0.4500 mmol) and 1H-indazol-6-amine (59.27 mg, 0.4500 mmol) were mixed in MeCN (2 mL) and irradiated in a CEM microwave at 100 C for one hour. The reaction mixture was allowed to cool and then passed through a short pad of silica. After concentration of the filtrate, the resultant solid was washed sequentially with acetonitrile and diethyl ether and dried in vacuo to give 16 (0.13g, 81%) as a light brown solid. 1H NMR (DMSO-d6) delta 13.21 (br s, 1H), 11.37 (s, 1H), 8.84 (s, 1H), 8.30 (s, 1H), 8.12 (s, 1H), 7.94 (s, 1H), 7.85 (d, J=8.6 Hz, 1H), 7.41 (d, J=8.6 Hz, 1H), 7.34 (s, 1H), 4.03 (s, 3H), 4.01 (s, 3H)

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-(Methylsulfonamido)aniline, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Jordan, Allan M.; Begum, Habiba; Fairweather, Emma; Fritzl, Samantha; Goldberg, Kristin; Hopkins, Gemma V.; Hamilton, Niall M.; Lyons, Amanda J.; March, H. Nikki; Newton, Rebecca; Small, Helen F.; Vishwanath, Swamy; Waddell, Ian D.; Waszkowycz, Bohdan; Watson, Amanda J.; Ogilvie, Donald J.; Bioorganic and Medicinal Chemistry Letters; vol. 26; 11; (2016); p. 2724 – 2729;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Reference of 57561-39-4, These common heterocyclic compound, 57561-39-4, name is tert-Butyl (2-hydroxyethyl)(methyl)carbamate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step 1. Synthesis of ethyl {2-[(tert-butoxycarbonyl)(methyl)amino]ethoxy}acetate A solution of ethyl 2-diazoacetate (0.900 mL, 8.56 mmol), tert-butyl (2-hydroxyethyl)(methyl)carbamate (1.50 g, 8.56 mmol) and rhodium(II) acetate dimer (0.380 g, 0.856 mmol) in CH2Cl2 (10.0 mL) were used to carry out the reaction. After the reaction was stirred at room temperature for 16 h and work-up, the residue was purified by Isco Combi-Flash Companion column chromatography (0-10% ethyl acetate in n-hexane) to give ethyl {2-[(tert-butoxycarbonyl)(methyl)amino]ethoxy}acetate (0.690 g, 31%). 1H NMR (CDCl3, 300 MHz) delta 4.28-4.18 (m, 2H), 4.07 (br s, 2H), 3.65 (br s, 2H), 3.42 (br s, 2H), 2.93-2.92 (m, 3H), 1.45-1.44 (m, 9H), 1.25 (br t, 3H).

The synthetic route of 57561-39-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; National Health Research Institutes; Ueng, Shau-Hua; Yeh, Shiu-Hwa; Lin, Shu-Yu; Shih, Chuan; (329 pag.)US2017/253569; (2017); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Related Products of 193751-54-1, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 193751-54-1 as follows.

To a solution of N-l-Boc-amino-3-cyclopentene (1.94 g, 10.58 mmol) in a mixture of acetone (63 mL)/water (7.8 mL) (8: 1) at room temperature was added N-methyl morpholine N-oxide (2.48 g, 21.16 mmol). After 2 minutes osmium tetroxide (4% in water) (3.37 mL) was added and the resulting mixture stirred at room temperature for 23h. The reaction mixture was then quenched by the addition of aqueous Na2S203 (0.2 M, 25 mL) and extracted with CH2C12 (2 x 50 mL). The combined organic extracts were washed with aqueous Na2S203 (0.2 M, 10 mL), dried (MgS04), filtered and evaporated in vacuo. The crude material was purified by flash chromatography eluting with EtOAc (17 – 100 %) in heptane to give a mixture of the title compounds as a yellow solid (1.31g, 57 %).

According to the analysis of related databases, 193751-54-1, the application of this compound in the production field has become more and more popular.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; GENENTECH, INC.; BROMIDGE, Steven; BURCH, Jason; HEIFETZ, Alexander; KRULLE, Thomas; MONTALBETTI, Christian A.G.N.; PEI, Zhonghua; PEREZ-FUERTES, Yolanda; TRANI, Giancarlo; (223 pag.)WO2016/1341; (2016); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 112257-19-9, name is tert-Butyl methyl(2-(methylamino)ethyl)carbamate belongs to amides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. Safety of tert-Butyl methyl(2-(methylamino)ethyl)carbamate

Brought 2-(2,6-dioxopiperidin-3-yl)-4-fluoroisoindoline-1,3-dione (1-3) (500 mg, 1.81 mmol) , tert-butyl methyl(2-(methylamino)ethyl)carbamate (22-1) (1.99 mmol) and DIEA (787 4.52 mmol) up in NMP (3.62 mL ) and heated to 90°C overnight. Cooled the mixture to r.t. and loaded directly onto reversed phase isco 10-100percent ACN/water w TFA. Lyophilized the combined fractions to give tert-butyl (2-((2-(2,6-dioxopiperidin-3-yl)-1,3-dioxoisoindolin-4- yl)(methyl)amino)ethyl)(methyl)carbamate (800 mg, 1.79 mmol, 99.5 percent) as a yellow solid. LC/MS (ES+): m/z 467 [M+Na]+

The synthetic route of 112257-19-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; C4 THERAPEUTICS, INC.; PHILLIPS, Andrew, J.; NASVESCHUK, Chris, G.; HENDERSON, James, A.; LIANG, Yanke; FITZGERALD, Mark, E.; MICHAEL, Ryan, E.; (790 pag.)WO2017/197056; (2017); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Electric Literature of 67442-07-3, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 67442-07-3 as follows.

To a THF solution of (S)-1-bromo-2-methyloxy-3-(1-methyloxyheptyl)benzene (9, 12.5 g) obatined in the second step was added dropwise a 2M isopropyl magnesium chloride THF solution (44 mL) under ice-cooling. After the reaction solution was stirred at 45°C for 3 hours, N-methyloxy-N-methyl-2-chloroacetamide(10, 3.5 g) was added under ice-cooling, and the mixture was stirred at room temperature for 1 hour. The reaction solution was extracted with ethyl acetate, and purified by silica gel chromatography to obtain (S)-2-chloro-1-(2-methyloxy-3-(1-methyloxyheptyl)phenyl)ethanone (11). NMR (CDCl3) delta ppm: 0.87 (3H, t, J = 6.8 Hz), 1.2 – 1.82 (10H, m), 3.22 (3H, s), 3.78 (3H, s), 4.53 (1H, m), 4.73 (2H, m), 7.24 (1H, t, J = 7.6Hz), 7.52 (1H, dd, J = 7.6 Hz, J = 1.8 Hz), 7.60 (1H, dd, J = 7.7 Hz, J = 1.8Hz)

According to the analysis of related databases, 67442-07-3, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Shionogi&Co., Ltd.; EP2184279; (2010); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Some common heterocyclic compound, 1129-26-6, name is 4-Methoxybenzenesulfonamide, molecular formula is C7H9NO3S, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Quality Control of 4-Methoxybenzenesulfonamide

General procedure: Under the argon atmosphere, a Schlenk tube (15 mL) equipped with a magnetic bar was loaded with the sulfonamide 1 (0.5 mmol), sodium arylsulfinates 2 (0.6 mmol, 1.2 equiv.), Pd(MeCN)2Cl2 (6.5 mg, 5 mol%) and AgOAc (166.9 mg, 1.0 mmol) in one portion. Then, the mixture of 1,4-dioxane/DMSO (3.5 mL in a 9:1 ratio) was added to obtain a clear solution and the reaction mixture was allowed to stir at 120 C for 24 h. After cooling to room temperature, the mixture was filtered through a short celite pad and washed with dichloromethane (15 mL 3). The filtrate was concentrated and the oily crude product was purified by column chromatography using silica gel (200-300 mesh) as stationary phase and a petroleum ether and ethyl acetate (3/1) as eluent to give the N-aryl sulfonamides 3 in noted yields.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1129-26-6, its application will become more common.

Reference:
Article; Zhao, Zijian; Lian, Yan; Zhao, Chang; Wang, Bing; Synthetic Communications; vol. 48; 12; (2018); p. 1436 – 1442;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Reference of 154350-29-5, The chemical industry reduces the impact on the environment during synthesis 154350-29-5, name is Cyclopropanesulfonamide, I believe this compound will play a more active role in future production and life.

To a solution of cyclopropanesulfonamide (6 g, 50 mmol) in DCM (50 ml) were added triethylamine (7.5 ml, 74 mmol) followed by DMAP (0.3 g, 7.5 mmol) and di-tert-butyl dicarbonate (13 g, 59 ml) and the reaction was left stirring overnight. The solvent was removed; water, 2N HCl (40 ml) and ethyl acetate were added. The organic layer was washed with brine, dried over magnesium sulfate and evaporated to give Boc-cyclopropanesulfonamide as a white solid, used on the next step without further purification. Yield 9.73 g (88percent).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Cyclopropanesulfonamide, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; INTERMUNE, INC.; US2011/82182; (2011); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics