Tag: M.W=100-200

1943-79-9, The chemical industry reduces the impact on the environment during synthesis 1943-79-9, name is Phenyl methylcarbamate, I believe this compound will play a more active role in future production and life.

Sodium hydride (60% in oil, 228 mg, 5.7 mmol) was gradually added to a N,N-dimethylformamide (0.5 ml) solution of 5-nitroindole (0.841 g, 5.19 mmol) while stirring at room temperature; phenyl N-methylcarbamate (1.02 g, 6.74 mmol) was added thereto; and the reaction mixture was stirred overnight. The reaction mixture was partitioned between ethyl acetate and water; and the organic layer was washed with water and brine, dried over anhydrous sodium sulfate. This was concentrated under reduced pressure; and the residue was purified by silica gel column chromatography (hexane-ethyl acetate, sequentially ethyl acetate) to yield the title compound (600 mg). 1H-NMR Spectrum (DMSO-d6) delta (ppm): 2.88 (3H, d, J=4.4 Hz), 6.94 (1H, d, J=3.6 Hz), 8.03 (1H, d, J=3.6 Hz), 8.15 (1H, dd, J=2.4, 9.2 Hz), 8.35-8.43 (2H, m), 8.59 (1H, d, J=2.4 Hz).

The chemical industry reduces the impact on the environment during synthesis Phenyl methylcarbamate. I believe this compound will play a more active role in future production and life.

Reference:
Patent; Eisai Co., Ltd.; EP1522540; (2005); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Application of 442514-22-9, These common heterocyclic compound, 442514-22-9, name is tert-Butyl (3-(methylamino)propyl)carbamate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of tert-butyl (3-(methylamino)propyl)carbamate (8 g, 42.5 mmol) in dichloromethane (DCM) (100 mL) was added TEA (1 1 .85 mL, 85 mmol). The reaction mixture was cooled to 0C and then chloroacetyl chloride (5.1 1 mL, 63.7 mmol) was added dropwise. It was stirred at ambient temperature for 1 h. The reaction was quenched with saturated sodium bicarbonate solution (80 mL) and extracted with DCM (2 x 80 mL). The combined organic layer was washed with brine solution (80 mL), dried over anhydrous Na2S04, filtered and concentrated. The crude residue was purified by flash column chromatography eluting with EtOAc: Hexane (3:7) to give the title compound (7 g, 24.37 mmol, 57.4 % yield) as light yellow liquid. LCMS m/z 265.35 (M+H)+,1 .79 min (ret. time)

The synthetic route of 442514-22-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; GLAXOSMITHKLINE INTELLECTUAL PROPERTY DEVELOPMENT LIMITED; BOEHM, Jeffrey Charles; DAVIS, Roderick S.; GOODWIN, Nicole Cathleen; KERNS, Jeffrey K.; LI, Tindy; YAN, Hongxing; (113 pag.)WO2018/109648; (2018); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Application of 1268810-09-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1268810-09-8, name is tert-Butyl (1-ethynylcyclopropyl)carbamate belongs to amides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

tert-Butyl (1-ethynylcyclopropyl )carbamate (200.0 mg, 1.104 mmol) was treated with azidotrimethyl silane (508.6 mg, 4.414 mmol, 4 equiv.) in the presence of copper iodide (21.0 mg, 0.11 mmol) in N,N-dimethylformamide (1 mL) and methanol (1 mL) and stirred at 110 C for 2 h. After cooling, purification by prep HPLC gave fert-butyl (1-(1H-1,2,3- triazol-4-yl)cyclopropyl)carbamate. LCMS-ESI+ (m/z): [M+H] + calculated for C10H17N4O2: 225.1 ; found: 225.1 .

The synthetic route of tert-Butyl (1-ethynylcyclopropyl)carbamate has been constantly updated, and we look forward to future research findings.

Reference:
Patent; GILEAD SCIENCES, INC.; GUTIERREZ, David A.; KOBAYASHI, Tetsuya; LAZERWITH, Scott E.; LEE, Rick A.; MORGANELLI, Philip A.; PYUN, Hyung-Jung; (0 pag.)WO2019/165374; (2019); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Reference of 14062-80-7, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 14062-80-7, name is 4-Chloro-N,N-dimethylbenzamide, This compound has unique chemical properties. The synthetic route is as follows.

EXAMPLE I 2-p-Chlorobenzoylpyrrole A mixture of 183 g (1 mole) of p-chloro-N,N-dimethylbenzamide and 153g (1 mole) of phophorous oxychloride in 300 ml of 1,2-dichloroethane is heated under reflux for 30 minutes, after which a solution of 67g (1 mole) of pyrrole in 300 ml of dichloroethane is added drop-wise. It is cooled and a solution of 408g (3 moles) of sodium acetate trihydrate in 1600 ml of water is added dropwise for 45 minutes, after which the mixture is again heated under reflux for 30 minutes. The resulting mixture is poured onto ice, the organic layer is separated, and the aqueous layer is washed with chloroform. The combined organic solutions are washed with sodium bicarbonate and brine and dried over magnesium sulfate. Evaporation of the solvent in vacuo gives a dark oil, which is distilled in vacuo through a heated Vigreaux column to give a white solid; mp 106-9 C. It is recrystallized from cyclohexane to give 2-p-chlorobenzoylpyrrole as white needles; m.p. 110-113 C.

The chemical industry reduces the impact on the environment during synthesis 4-Chloro-N,N-dimethylbenzamide. I believe this compound will play a more active role in future production and life.

Reference:
Patent; McNeil Laboratories, Inc.; US4002643; (1977); A;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Some common heterocyclic compound, 683-57-8, name is 2-Bromoacetamide, molecular formula is C2H4BrNO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. category: amides-buliding-blocks

In a 100 mL round bottom flask was added 3-chlorophenol (2.57 g, 20.0 mmol), 2-bromoacetamide (2.76 g, 20.0 mmol), potassium carbonate (5.53 g, 40.0 mmol) and acetone (40 mL),The reaction system was heated to 70C and reacted overnight.After the reaction is completed, the mixture is cooled to room temperature, filtered, and the solvent is evaporated to dryness under reduced pressure. The crude product is purified by column chromatography (petroleum ether/ethyl acetate (V/V) = 1/1) to give a white solid (3.22 g, 87).%).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 683-57-8, its application will become more common.

Reference:
Patent; SUNSHINE LAKE PHARMA CO., LTD.; ZHANG, YINGJUN; ZHANG, JIANCUN; WANG, XIAOJUN; LIN, RUNFENG; CAO, SHENGTIAN; WANG, ZHAOHE; LI, JING; (226 pag.)TWI607995; (2017); B;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

1118-69-0, name is N-Isopropylacetamide, belongs to amides-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. 1118-69-0

The compound of formula XIV-1 (31.05 g, 0.15 mol), the compound of formula XIII-1 (30.3 g, 0.30 mmol)Phosphorus oxychloride(20.9 mL, 0.225 mol) were added sequentially to anhydrous toluene. Triethylamine (31.3 mL, 0.225 mol) was added in an ice bathConstant pressure funnel slowly added dropwise to the reaction flask,Maintain the internal temperature is less than 60 .The reaction flask was transferred to an oil bath and heated to reflux.After 2 hours, the reaction flask was cooled to room temperature, slowly poured into 300 g of ice water mixture, 300 ml of ethyl acetate was added, sufficientAfter the mixture was separated, the aqueous layer was extracted with 200 ml of ethyl acetate again. The combined organic layers were washed with saturated brine and dried over anhydrous sulfuric acidSodium dried, concentrated under reduced pressure to give a pale yellow solid, beaten with 100 ml of petroleum ether for 10 minutes, filtered under reduced pressure to give a compound of formulaCompound XV-1 (28.0 g) as an off white solid (yield 92.3%)

Statistics shows that 1118-69-0 is playing an increasingly important role. we look forward to future research findings about N-Isopropylacetamide.

Reference:
Patent; Zhengda Tianqing Pharmaceutical Group Co., Ltd.; Zhang Yinsheng; Liu Yingshuai; Qin Hui; Li Yuan; Zhao Kaidi; Miao Lei; Hu Jie; Liu Haiyan; Wang Xiaojin; (33 pag.)CN107266421; (2017); A;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 5763-44-0, name is Tetrahydrocyclopenta[c]pyrrole-1,3(2H,3aH)-dione, A new synthetic method of this compound is introduced below., Product Details of 5763-44-0

tert-Butyl 4-(4-chloro-2-(2-((1,3-dioxohexahydrocyclopenta[c]pyrrol-2(1H)-yl)methyl)thieno[3,2-b]pyridin-7-yl)-6-methylphenoxy)piperidine-1-carboxylate. To diisopropyl azodicarboxylate (99 mg, 0.49 mmol) and tert-butyl 4-[4-chloro-2-[2-(hydroxymethyl)thieno[3,2-b]pyridin-7-yl]-6-methyl-phenoxy]piperidine-1-carboxylate (30 mg, 0.06 mmol) in THF (5 mL) was added triphenylphosphine polymer bound (0.55 mmol) and 4,5,6,6a-tetrahydro-3aH-cyclopenta[c]pyrrole-1,3-dione (61 mg, 0.44 mmol). Stirred at 60 C. for 2 h. The mixture was filtered and the filtrate washed twice with EtOAc. Combined all organic phases and washed with water and brine. Concentrated under vacuo and purified by column chromatography with hexanes:EtOAc (70% to 100%) to give 26 mg (69%) of the title compound as a light yellow oil. [M+H] 610.0

The synthetic route of 5763-44-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; FLX Bio, Inc.; Biannic, Berenger; Han, Xinping; Hu, Dennis X.; Ketcham, John Michael; Leger, Paul Robert; Maung, Jack; Okano, Akinori; Schwarz, Jacob Bradley; Shibuya, Grant; Wustrow, David Juergen; Young, Kyle; US2019/142834; (2019); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 63920-73-0, name is 2-Amino-4,6-dimethoxybenzamide, This compound has unique chemical properties. The synthetic route is as follows., SDS of cas: 63920-73-0

This product was used in next step without further purification. To a solution of 2-dimethylaminomethyl-1H-indole-5-carbaldehyde (0.88 g crude, 4.35 mmol) and 2-amino-4,6-dimethoxy-benzamide (0.85 g, 4.35 mmol) in N,N-dimethylacetamide (15 mL) were added sodium hydrogen sulfite (58.5 wt %, 0.95 g, 5.22 mmol) and p-toluenesulfonic acid (0.99 g, 5.22 mmol). The reaction mixture was stirred at 120 C. for 5 hours under nitrogen, then cooled to room temperature, and concentrated under reduced pressure. 30% aqueous sodium carbonate (50 mL) was then added. The separated solid was filtered, washed with water (50 mL), and dried under vacuum. Crude compound was purified by the Simpliflash system (0-5% methanol in CH2Cl2 and 7 N ammonia in methanol 5% in CH2Cl2 as eluent) to give the title compound as an off-white solid. Yield: 0.83 g (50%). MP 187-188 C. 1H NMR (400 MHz, DMSO-d6): delta 11.82 (s, 1H), 11.34 (s, 1H), 8.38 (s, 1H), 7.93 (d, J=8.59 Hz, 1H), 7.40 (d, J=8.59 Hz, 1H), 6.73 (s, 1H), 6.49 (s, 1H), 6.40 (s, 1H), 3.90 (s, 3H), 3.85 (s, 3H), 3.57 (s, 2H), 2.21 (s, 6H)

According to the analysis of related databases, 63920-73-0, the application of this compound in the production field has become more and more popular.

Reference:
Patent; RVX Therapeutics Inc.; McLure, Kevin G.; Young, Peter R.; US2013/281399; (2013); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 354-38-1, name is 2,2,2-Trifluoroacetamide, This compound has unique chemical properties. The synthetic route is as follows., COA of Formula: C2H2F3NO

Intermediate 186 (0.43 g, 1.22 mmol) was dissolved in DCM (20 mL) and 2,2,2- trifluroacetamide (0.28 g, 2.49 mmol), magnesium oxide (0.21 g, 5.1 mmol), rhodium(II) acetate dimer (0.028 g, 0.064 mmol) and iodobenzene I,I-diacetate (0.53 g, 1.65 mmol) were added. After 18 h at r.t. the pink solution was filtered through a pad of celite and concentrated in vacuo. The residue was purified by column chromatography (Si02, 20- 60% EtOAc:DCM) to yield the title compound (0.39 g, 90%). HPLC-MS : MH+ mlz 431 , RT 2.00 minutes

According to the analysis of related databases, 354-38-1, the application of this compound in the production field has become more and more popular.

Reference:
Patent; UCB BIOPHARMA SPRL; BRACE, Gareth Neil; CHOVATIA, Prafulkumar Tulshibhai; FOULKES, Gregory; JOHNSON, James Andrew; JONES, Severine Danielle; KROEPLIEN, Boris; LECOMTE, Fabien Claude; LOKE, Pui Leng; LOWE, Martin Alexander; MANDAL, Ajay; NORMAN, Timothy John; PALMER, Christopher Francis; PEREZ-FUERTES, Yolanda; PORTER, John Robert; SMYTH, Donald; TRANI, Giancarlo; UDDIN, Muhammed; ZHU, Zhaoning; (207 pag.)WO2016/198400; (2016); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 154748-63-7, name is tert-Butyl (3-hydroxycyclobutyl)carbamate, belongs to amides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 154748-63-7, name: tert-Butyl (3-hydroxycyclobutyl)carbamate

c) tert-butyl (3-tosyl-cyclobutyl)-carbamate18.7 g (100 mmol) tert-butyl (3-hydroxy-cyclobutyl)-carbamate and 12.1 g (120 mmol) triethylamine are placed in 500 mL chloroform. 20.5 g (105 mmol) tosyl chloride, which is dissolved in 150 mL chloroform, is added dropwise to this solution at 00C with stirring. Then the reaction mixture is allowed to come up to 200C and stirred for a further 2 h. The organic phase is washed successively with water, with dilute hydrochloric acid, with sodium hydrogen carbonate solution and again with water. The organic phase is dried on magnesium sulphate and the solvent is eliminated in vacuo. Yield: 28.3 g MS (ESI): 342 (M +H)+

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, tert-Butyl (3-hydroxycyclobutyl)carbamate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; WO2007/115999; (2007); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics