Tag: M.W=100-200

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 683-57-8, name is 2-Bromoacetamide belongs to amides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. COA of Formula: C2H4BrNO

(0.86 g, 10 mmol) piperazine was dissolved in THF and (2.76 g, 20 mmol) potassium carbonate was added and mixture was stirred at room temperature for 20 min and then (2.90 g, 21mmol) 2-bromoacetamine was added. The mixture was stirred for 15 h and the completion of the reaction was monitored by TLC analysis and upon the completion, the solid was filtered with sintered glass funnel. The filtrate was evaporated by rotary evaporator and the residue was dried in vacuum desiccator. The best yields of the desired products were obtained when the reaction was carried out in THF at room temperature with a 1:2 mole ratio of the reagents. Formation of HBr is eliminated with subsequent treatment of this salt with saturated aqueous sodium carbonate. The white crystals were obtained. The compound was characterized using different spectroscopic techniques, including IR, NMR and MS, elemental analyses. Reaction scheme is given in Scheme 1. (0005) Yield: 77%, 1.6g. Anal. calcd. for C8H16N4O2, (200.24g/mol): C 47.99%; H 8.05%; N 27.98%. Found: C 47.83%; H 8.14%; N 27.82%. FT-IR (KBr, cm-1): 1675 nu(C=0, amide), 3323, 3213, 3146 nu(N-H). 1H NMR (delta, ppm, CD3OD): 7.33 (NH2, s, 4H), 3.91(s, CH2-N, 4H), 3.50-3.60 (d t, piperazine ring, 8H), 13C NMR (delta, ppm, CDCl3): 167.89 (C=O), 56.79 (CH2-N, 2C), and 49.74 (piperazine ring, 4C). GS MS (E, m/z): [M] +, 200.99.

The synthetic route of 683-57-8 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Kacan, Mesut; Turkyilmaz, Murat; Karabulut, Ferhat; Altun, Ozlen; Baran, Yakup; Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy; vol. 118; (2014); p. 572 – 577;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 402-46-0, name is 4-Fluorobenzenesulfonamide, A new synthetic method of this compound is introduced below., Product Details of 402-46-0

General procedure: To a round-bottom flask (500 mL) that contained a solution of aryl sulfonamide (6 mmol), 4-dimethyaminopyridine (DMAP, 13 mmol), and 1-[3-(dimethyamino)-propyl]-3-ethylcarbodiimide hydrochloride (EDCI, 13 mmol) in CH2Cl2 (150 mL) was added the synthesized phenylacetic acid (6 mmol) at room temperature. The resulting mixture was stirred at room temperature for 12 h, then cooled to 5 C, and acidified to pH 1 with addition of HCl aqueous solution (10%), which was followed by extraction with CH2Cl2/MeOH (9:1, 3 × 100 mL). The combined organic layers were washed with H2O and brine, dried over Na2SO4, and concentrated in vacuo. The residue was subjected to silica gel chromatography or crystallization if necessary to afford the compounds (20-44) (Scheme 2).

The synthetic route of 402-46-0 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Luo, Yin; Li, Yao; Qiu, Ke-Ming; Lu, Xiang; Fu, Jie; Zhu, Hai-Liang; Bioorganic and Medicinal Chemistry; vol. 19; 20; (2011); p. 6069 – 6076;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Some common heterocyclic compound, 445-28-3, name is 2-Fluorobenzamide, molecular formula is C7H6FNO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Computed Properties of C7H6FNO

Example 57 In analogy to example 47, on reaction of 7-iodo-2-methyl-4-pyrrolidin-1-yl-quinoline with 2-fluorobenzamide there was obtained: 2-fluoro-N-(2-methyl-4-pyrrolidin-1-yl-quinolin-7-yl)-benzamide as light yellow solid. ISP mass spectrum, m/e: 350.3 (M+1 calculated for C21H20FN3O: 350).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 445-28-3, its application will become more common.

Reference:
Patent; Mattei, Patrizio; Mueller, Werner; Neidhart, Werner; Nettekoven, Matthias Heinrich; Pflieger, Philippe; US2003/153553; (2003); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 579-10-2, name is N-Methylacetanilide, This compound has unique chemical properties. The synthetic route is as follows., category: amides-buliding-blocks

A solution of N-methyl-N-phenylacetamide (73.8 mmol) in dichloromethane (20 mL) was added dropwise to sulfurochloridic acid (690 mmol) at 5 C. and the resulting solution was allowed to warm to rt and was maintained 16 h. The reaction mixture was diluted with iced water (100 mL) and was extracted with dichloromethane (2×50 mL). The combined organic layers were dried (sodium sulfate) and concentrated. The residue was purified by Flash chromatography (10/1 ethyl acetate/petroleum ether) to give 4-(N-methylacetamido)benzene-1-sulfonyl chloride in 11% yield as a white solid. 1H NMR (CDCl3) delta 8.09 (d, 2H), 7.48 (d, 2H), 3.38 (s, 3H), 2.17 (s, 3H).

According to the analysis of related databases, 579-10-2, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Memory Pharmaceuticals Corporation; US2010/29629; (2010); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Synthetic Route of 148017-28-1, A common heterocyclic compound, 148017-28-1, name is tert-Butyl sulfamoylcarbamate, molecular formula is C5H12N2O4S, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

b) Preparation of a sulfamide compound To a solution of (2R,4S)-4-acetylthio-1-t-butoxycarbonylpyrrolidine-2-methanol (i.e., a substrate) in tetrahydrofuran (THF), triphenylphosphine (PPh3), N-t-butoxycarbonylsulfamide (BSMD), and azodicarboxylic acid diethyl ester (DEAD) are successively added under ice cooling. The conditions for this reaction are shown in Table 2, Step A-6. The reaction mixture is diluted with toluene, concentrated, diluted with toluene, and the formed crystals are filtered off. The filtrate is concentrated. The residue is purified by silica gel column chromatography to give (2R,4S)-4-acetylthio-1-t-butoxycarbonyl-2-(N-t-butoxycarbonyl-N-sulfamoylamino)methylpyrrolidine. NMR delta(CDCl3) ppm: 1.41(s, 9H), 1.55(s, 9H), 1.19 to 2.0(m, 2H), 2.35(s, 3H), 3.32(dd, J=11.4 Hz, J=8.2 Hz, 1H), 3.6 to 3.9(m, 3H), 3.9 to 4.1(m, 1H), 4.5(m, 1H), 6.15(s, 2H). IR nu (KBr) cm-1: 3420, 3320, 1706, 1686, 1666.

The synthetic route of 148017-28-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Shionogi Seiyaku Kabushiki Kaisha; US5317016; (1994); A;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Application of 98-18-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 98-18-0, name is 3-Aminobenzenesulfonamide belongs to amides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

A solution of 3-aminobenzenesulfonamide (413.3 mg, 2.40 mmol), 2,5- difluoro-4-methyl-benzoic acid (344.3 mg, 2.0 mmol), HATU (684.4 mg, 1.80 mmol) and N- methylmorpholine (439.8 mu, 4.0 mmol) in DMF (2 mL) was stirred at 40 °C for 2 hours. The reaction was poured into IN HCl and extracted with ethyl acetate (3x). The organics were combined, washed with water, brine, dried with Na2S04 and evaporated to dryness to give 2,5-difluoro-4-methyl-N-(3-sulfamoylphenyl)benzamide (610 mg, 94percent) as a solid that was used in the next step without further purification. ESI-MS m/z calc. 326.05, found 327.3 (M+1) +; Retention time: 1.25 minutes (3 minutes run).

The synthetic route of 3-Aminobenzenesulfonamide has been constantly updated, and we look forward to future research findings.

Reference:
Patent; VERTEX PHARMACEUTICALS INCORPORATED; HADIDA-RUAH, Sara Sabina; ANDERSON, Corey; TERMIN, Andreas P.; BEAR, Brian Richard; ARUMUGAM, Vijayalaksmi; KRENITSKY, Paul; JOHNSON, James Philip; WO2015/10065; (2015); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Related Products of 67442-07-3, A common heterocyclic compound, 67442-07-3, name is 2-Chloro-N-methoxy-N-methylacetamide, molecular formula is C4H8ClNO2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step 1: 4-bromo-1-chloro-2-fluorobenzene (64 kg) and dry toluene (170 kg) were charged to the 2000 L steel reaction vessel under nitrogen. The reactor was evacuated and backfilled with N2 for three times, and cooled to between -10 and 5° C. under nitrogen atmosphere. To the solution was added dropwise i-PrMgCl.LiCl (280 kg, 1.3M in THF) at between -10 and 10° C. The reaction was stirred for a further 15 to 30 min at between -10 and 10° C. and then warmed to about 20 to 25° C. over 1 h. The reaction mixture was stirred for another 6 h stir to complete the exchange. The resulting solution was cooled to between -50 and -40° C. A solution of 2-chloro-N-methoxy-N-methylacetamide (44.5 kg) in dry toluene (289 kg) was added dropwise to the above solution at while maintaining the temperature between -50 and -30° C. The reaction mixture was warmed to between 20 and 25° C. over 1 h and then stirred for 3 h to complete the reaction. The reaction was quenched by addition of 1N aq. HCl (8081 g) at a temperature between -5 and 15° C. The aqueous layer was separated and organic layer was filtered through a pad of diatomaceous earth. The organic layer was washed with 10percent aq. NaCl solution (320 kg) twice, then concentrated to about 300 L to obtain 1-(4-chloro-3-fluorophenyl)-2-chloroethanone (51.8 kg, 81.9percent yield) as product in toluene.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Genentech, Inc.; Lin, Jinguang; Chestakova, Alexandra; Gu, Wei; Iding, Hans; Li, Jing; Linghu, Xin; Meier, Patrik; Sha, Chunbo; Stults, Jeffrey; Wang, Youchu; Zhang, Haiming; Zhang, Jianqian; Zhang, Tao; (56 pag.)US2017/22183; (2017); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 72179-84-1 as follows. Quality Control of (Methylsulfamoyl)amine

Material from Example 73-Step 1 (40 mg, 0.098 mmol) was dissolved in tetrahydrofuran (5 mL) and 1,1?-carbonyldiimidazole (47.5 mg, 0.293 mmol) was added. The mixture was heated to 60 C for 1 hour, then 1,8-diazabicyclo[5.4.0]undec-7-ene (44.6 mg, 0.293 mmol) and Nmethylsulfuric diamide (32.3 mg, 0.293 mmol) were added followed by stirring at room temperature for 12 hours. The mixture was concentrated, and the residue was dissolved in CH3OH (1.3 mL) to which a couple of drops of acetic acid were added to adjust the pH to 6-7. The filtered solution was purified by preparative HPLC (0.1% CF3CO2H/H20/CH3CN) to give the titled compound (28 mg, 0.056 mmol, 57.1% yield). ?H NMR (400 MHz, DMSO-d6) ppm 11.25 (s, 1H), 7.42 -7.36 (m, 1H),7.33 – 7.08 (m, 4H), 7.06 – 6.96 (m, 2H), 6.86 (d, J = 7.6 Hz, 2H), 3.73 (s, 2H), 3.26 – 3.16 (m, 3H),2.46 (s, 2H), 2.32 – 2.20 (m, 2H), 2.09 (t, J = 7.2 Hz, 1H), 1.73 (s, OH), 1.43 (s, 2H), 1.34 (s, 1H), 1.30- 1.21 (m, 1H), 1.18 (s, 1H), 1.13 (s, 1H), 1.07 (s, 1H), 0.93 (s, 1H).

According to the analysis of related databases, 72179-84-1, the application of this compound in the production field has become more and more popular.

Reference:
Patent; ABBVIE INC.; BLACK, Lawrence, A.; BUNNELLE, William, H.; CHEN, Da; CLAPHAM, Bruce; DEGOEY, David, A.; DENG, Xiangjun; FU, Liqiang; HAZELWOOD, Lisa, A.; KONG, Linglong; LANG, Qingyu; LEE, Chih-Hung; LI, Mingfeng; LUNDGAARD, Greta, L.; PATEL, Meena, V.; TAO, Ruihong; ZHANG, Lin; ZHANG, Qingwei; ZHENG, Qiangang; ZHU, Wei; (289 pag.)WO2017/177004; (2017); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

These common heterocyclic compound, 518057-72-2, name is 5-Amino-2-fluorobenzamide, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. category: amides-buliding-blocks

To a solution of 5-amino-2-fluoro-benzamide (0.88 g, 5.7 mmol) and DIEA (3.0 mL, 17 mmol) in THF (20 mL) and dichloromethane (10 mL) at 0 C was added a solution of 6-cyclopropyl-4- [2-methoxy-4-(trifluoromethoxy)phenoxy]pyridine-3-carbonyl chloride (2.1 g, 5.4 mmol) in dichloromethane. The reaction mixture was removed from the ice bath and stirred at room temperature for 1 hour. The reaction mixture was diluted with water and extracted with dichloromethane. The organic layer was concentrated in vacuo and the resulting solid was purified using silica gel chromatography (0-60% ethyl acetate/hexanes) to provide N-(3 -carbamoyl -4-fluoro-phenyl)-6- cyclopropyl-4-[2-methoxy-4-(trifluoromethoxy)phenoxy]pyridine-3-carboxamide (1.1 g, 40%). ESI-MS m/z calc. 505.13, found 506.2 (M+l)+; retention time (Method B): 1.4 minutes (3 minute run). ‘H NMR (400 MHz, DMSO-d6) delta 10.41 (s, 1H), 8.55 (s, 1H), 7.99 (dd, J = 6.5, 2.8 Hz, 1H), 7.87 – 7.76 (m, 1H), 7.69 (d, J = 14.5 Hz, 2H), 7.45 (d, J = 8.8 Hz, 1H), 7.32 – 7.18 (m, 2H), 7.07 (ddd, J = 8.8, 2.8, 1.3 Hz, 1H), 6.59 (s, 1H), 3.80 (s, 3H), 2.07 (p, J = 6.7 Hz, 1H), 0.99 – 0.87 (m, 4H) ppm.

The synthetic route of 5-Amino-2-fluorobenzamide has been constantly updated, and we look forward to future research findings.

Reference:
Patent; VERTEX PHARMACEUTICALS INCORPORATED; AHMAD, Nadia; ANDERSON, Corey; ARUMUGAM, Vijayalaksmi; ASGIAN, Iuliana, Luci; CAMP, Joanne, Louise; FANNING, Lev Tyler, Dewey; HADIDA RUAH, Sara, Sabina; HURLEY, Dennis; SCHMIDT, Yvonne; SHAW, David; SHETH, Urvi, Jagdishbhai; THOMSON, Stephen, Andrew; (691 pag.)WO2019/14352; (2019); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

These common heterocyclic compound, 78191-00-1, name is N-Methoxy-N-methylacetamide, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. name: N-Methoxy-N-methylacetamide

4-Prop-2-ynyl-morpholine (22 g, 176 mmol) was dissolved under nitrogen in THF (40 mL) and cooled to-40 C. Then a 2 M solution of isopropyl magnesium chloride in THF (97 mL, 193 mmol) was added while keeping the temperature below-20 C. Stirring at – 40 C to-30 C was continued for 30 min. In a separate flask, N-methoxy-N- methylacetamide (20 g, 193 mmol) was dissolved under nitrogen in THF (40 mL) and cooled to-10 C in ice/MeOH. The Grignard solution prepared above was transferred to the Weinreb amide solution at-10 C via teflon tubing under slightly positive nitrogen pressure in vessel 1. There was no exotherm. Stirring at-10 C to 0 C was continued for 2 h. Ther resulting white suspension was poured on a 1 : 1-mixture of ice and saturated NH4Cl solution (400 mL). Extraction: 2 x AcOEt, 1 x saturated NaCl solution. One obtained a yellow oil (26. 1 g, 89 %). Chromatography on silica gel in heptane/ethyl acetate 1: 2 gave 19.4 g (66 %) of a brown oil which was distilled in the Kugelrohr at 130 C/0. 2 mbar. One obtained 15.8 g (53 %) of a yellow oil.

The synthetic route of N-Methoxy-N-methylacetamide has been constantly updated, and we look forward to future research findings.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; WO2005/94828; (2005); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics