Tag: M.W=200-300

Some common heterocyclic compound, 1103234-56-5, name is 2,6-Difluoro-3-(propylsulfonamido)benzoic acid, molecular formula is C10H11F2NO4S, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Product Details of 1103234-56-5

Triethylamine (4.68 mL, 33.59 mmol) and diphenylphosphonic azide (3.73 mL, 16.79 mmol) were added to a solution of 2,6-difluoro-3-(propylsulfonamido)benzoic acid (4.078 g, 14.6 mmol) in THF (60 mL). The reaction mixture was stirred at room temperature for 3 hours and then warmed to 80C for 2 hours. Water (10 mL) was added, and the mixture was stirred at 80C for 15 hours. The reaction mixture was diluted with EtOAc (300 mL), and the organic layer was washed with saturated aqueous NaHC03 solution and brine. The solvent was removed under reduced pressure, and the residual purified via silica gel column chromatography eluting with 30/70 EtOAc/hexane to obtain 2.03 g (55%) of the title compound. 1H NMR (400 MHz, DMSO-d6) delta 9.32 (s, 1H), 6.90-^.80 (m, 1H), 6.51 (td, J=8.7, 5.5, 1H), 5.28 (s, 2H), 3.05-2.96 (m, 2H), 1.82-1.64 (m, 2H), 1.01-0.90 (m, 3H). LC/MS: w/z 251.1 [M+l].

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1103234-56-5, its application will become more common.

Reference:
Patent; ARRAY BIOPHARMA INC.; GENENTECH, INC.; GRINA, Jonas; HANSEN, Joshua D.; LAIRD, Ellen; MATHIEU, Simon; MORENO, David; REN, Li; RUDOLPH, Joachim; WENGLOWSKY, Steven Mark; WO2012/118492; (2012); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 406233-31-6 as follows. name: 4-Fluoro-3-nitrobenzenesulfonamide

General procedure: To an ice cold stirred solution of compound 4a-4u (1 eq) in anhydrousDCM (10 mL for 1 mmol of substrate), TEA (3 eq) was added dropwise and stirred for 10 min. Compound 5 (1 eq) was added slowly andstirred at RT for 16 h (precipitation was observed during the reactionprogress). TLC showed completion of reaction. The reaction mixturewas concentrated under reduced pressure. Water was added to thecrude material and stirred for 30 min. Obtained solid was filtered,washed with water and dried under vacuum. The solid was trituratedwith ethyl acetate, filtered and dried under high vacuum to affordcompound 6a-v.

According to the analysis of related databases, 406233-31-6, the application of this compound in the production field has become more and more popular.

Reference:
Article; Kalisha Vali; Gundla, Rambabu; Singh, Om V.; Tamboli, Yasinalli; Di Cesare Manelli, Lorenzo; Ghelardini, Carla; Al-Tamimi, Abdul-Malek S.; Carta, Fabrizio; Angeli, Andrea; Supuran, Claudiu T.; Bioorganic Chemistry; vol. 92; (2019);,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Some common heterocyclic compound, 138-41-0, name is Carzenide, molecular formula is C7H7NO4S, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. name: Carzenide

A. 4-Sulfamoyl-benzoic acid methyl ester. To a stirred suspension of 4-sulfamoyl-benzoic acid (25.0 g, 0.124 mol) in 4:1 CH2Cl2/MeOH at rt was added 1.0 M TMSCHN2 in hexane (175 mL), and the reaction mixture was allowed to stir for 2 h. The mixture was diluted with 1 N NaOH (100 mL) and CH2Cl2 (150 mL), and the layers were separated. The organic layer was dried over Na2SO4, then filtered, and the solvent was removed under reduced pressure to afford the desired ester (25.2 g, 95%), which was used without further purification. 1H NMR (400 MHz, DMSO-d6): 8.14 (d, J=8.1 Hz, 2H), 7.96 (d, J=8.1 Hz, 2H), 7.58 (s, 2H), 3.90 (s, 3H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 138-41-0, its application will become more common.

Reference:
Patent; Deng, Xiaohu; Mani, Neelakandha; Mapes, Christopher M.; US2006/4195; (2006); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Application of 51-06-9, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 51-06-9 name is 4-Amino-N-(2-diethylaminoethyl)benzamide, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

A mixture of p-SCN-Bn-NOTA (0.05 g, 0.09 mmol) and 4-amino-N-(2-(diethylamino)ethyl)benzamide (0.030 g, 0.11 mmol) in CHCl3 (1 mL) containing TEA (45 muL, 0.27 mmol) was stirred 24 h at room temperature. The solvent was evaporated under reduced pressure. The resulting product was purified by semi-preparative HPLC (gradient 10% of H2O for 5 min and 10-70% of MeCN for 30 min; flow rate, 2 mL/min; 240 nm; tR, 12 min) to give SCN-NOTA-BZA as a pale yellow solid (46 mg, 75%). MS (FAB) m/z 686, (M+H)+; HRMS of C33H48N7O7S 686.3336 (calculated) and 686.3340 (observed); 1H NMR (500 MHz, D2O): delta 7.68 (d, 1H), 7.34 (d, 2H), 7.20 (m, 4H), 3.67-3.65 (br, 2H), 3.54-3.50 (br, 2H), 3.39-3.29 (br, 4H), 3.20-3.12 (br, 6H), 3.09-2.99 (br, 8H), 2.92-2.52 (br, 3H), 1.20-1.14 (br, 8H); 13C NMR (125 MHz, D2O): delta 179.3, 178.5, 176.3, 174.4, 169.8, 142.0, 136.8, 136.1, 130.3, 130.0, 129.8, 128.8, 128.2, 126.0, 125.6, 124.5. 60.6, 57.8, 57.6, 57.2, 57.1, 52.4, 52.1, 51.6, 50.6, 47.6, 46.6, 46.0, 43.5, 34.9, 33.7, 33.6, 8.2, 8.1.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 4-Amino-N-(2-diethylaminoethyl)benzamide, and friends who are interested can also refer to it.

Reference:
Article; Kim, Hee-Jung; Kim, Dong-Yeon; Park, Jeong-Hoon; Yang, Seung-Dae; Hur, Min-Goo; Min, Jung-Joon; Yu, Kook-Hyun; Bioorganic and Medicinal Chemistry; vol. 20; 16; (2012); p. 4915 – 4920;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Reference of 72505-21-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 72505-21-6, name is 4-(Trifluoromethyl)thiobenzamide belongs to amides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

General procedure: Appropriate thiobenzamides or thioacetamides (1 mmol) and alpha-chloroacetoacetate 3 (150 mg, 1.2 mmol) were added to absolute ethanol (15 mL). The reaction mixture was heated at reflux for 24 h. After removal of solvent under reduced pressure, the residue was purified by silica gel chromatography using hexanes-ethyl acetate (7:3) to provide the desired compounds.

The synthetic route of 4-(Trifluoromethyl)thiobenzamide has been constantly updated, and we look forward to future research findings.

Reference:
Article; Mayhoub, Abdelrahman S.; Khaliq, Mansoora; Botting, Carolyn; Li, Ze; Kuhn, Richard J.; Cushman, Mark; Bioorganic and Medicinal Chemistry; vol. 19; 12; (2011); p. 3845 – 3854;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 87905-98-4, name is Benzyl (5-hydroxypentyl)carbamate, belongs to amides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 87905-98-4, category: amides-buliding-blocks

To a solution of oxalyl chloride (814 mul, 9.62 mmol, 2.3 equiv.) in dried dichloromethane (25 ml) under an inert atmosphere was slowly added a solution of dimethylsulfoxyde (1.3 ml, 18.2 mmol, 4.3 equiv.) in dried dichloromethane (10 ml). The solution was stirred for 5 min at -70C then a suspension of benzyl ((5-hydroxypentyl)carbamate) [21] (1 g, 4.22 mmol, 1 equiv.) in dried dichloromethane (25 ml) was transferred via canula. The mixture was stirred for 25 min at -70C then triethylamine (11.7 ml, 8.44 mmol, 20 equiv.) was slowly added. The reaction mixture was stirred for 20 min at -70C and 15 min at room temperature and then quenched by addition to 600 ml of water. The aqueous phase was extracted with diethylether (3×100 ml) and the combined organic layers were dried over magnesium sulfate, filtered and concentrated to dryness under reduced pressure to obtain the aldehyde (1.1 g) used in the next step without purification. To a suspension of potassium cyanide (249 mg, 3.83 mmol, 1 equiv.) in water (520 mul) were added ammonium chloride (203 mg, 3.83 mmol, 1 equiv.) and ammonium hydroxide 33% (1.32 ml; 20.3 mmol, 5.3 equiv.). The reaction mixture was stirred for 15 min at 0C then a solution of the aldehyde (900 mg, 3.83 mmol, 1 equiv.) in dioxane (1.35 ml) was added dropwise over 20 min. The mixture was stirred for 20 h and then quenched by addition of water (10 ml) and diethyl ether (30 ml). The aqueous phase was acidified with HCl 1 M (50 ml), washed with diethyl ether (3×20 ml), basified to pH = 12 with NaOH 1 M (20 ml) and then extracted with dichloromethane (4×10 ml). The combined organic layers were dried over magnesium sulfate, filtered and concentrated to dryness under reduced pressure to obtain the protected aminonitrile; yield: 905 mg (91%). 1H NMR (MeOD-d4, 300 MHz) delta 1.52 (m, 4H, H4, H5), 1.71 (m, 2H, H3), 3.14 (t, 2H, H6), 3.71 (t, 2H,H2), 5.06 (s, 2H, H8), 7.34 (m, 5H, H10-H12); 13C NMR (MeOD-d4, 75 MHz) . 23.9 (C4), 30.4 (C5), 35.9 (C3), 41.5 (C6), 44.2 (C2), 67.4(C8), 123.1 (C1), 128.8-129.6 (C10-C12), 138.6 (C9), 159.0 (C7) (seeSI, Figs. S3 and S4).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, Benzyl (5-hydroxypentyl)carbamate, and friends who are interested can also refer to it.

Reference:
Article; Bordier, Franck; Stam, Mark; Darii, Ekaterina; Tricot, Sabine; Fossey, Aurelie; Rohault, Johanna; Debard, Adrien; Mariage, Aline; Pellouin, Virginie; Petit, Jean-Louis; Perret, Alain; Vallenet, David; Salanoubat, Marcel; Weissenbach, Jean; Vergne-Vaxelaire, Carine; De Berardinis, Veronique; Zaparucha, Anne; Journal of Molecular Catalysis B: Enzymatic; vol. 107; (2014); p. 79 – 88;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 456-64-4, name is 1,1,1-Trifluoro-N-phenylmethanesulfonamide, A new synthetic method of this compound is introduced below., HPLC of Formula: C7H6F3NO2S

EXAMPLE 10 Preparation of (S)-N-(tert.butoxycarbonyl)-N-propyl-6-methoxy-5-methoxycarbonyl-1,2,3,4-tetrahydro-2-naphthylamine A solution of (S)-N-(tert.butoxycarbonyl)-N-propyl-6-methoxy-5-hydroxy-1,2,3,4-tetrahydro-2-naphthylamine (1.4 g; 4.17 mmoles), prepared as described in example 9, in acetonitrile (42 ml) was added at room temperature with K2CO3 (1.15 g, 8.34 mmoles) and, dropwise, with a solution of N-phenyltrifluoromethansulfonimide (1.78 g; 5 mmoles) in acetonitrile (10 ml). The reaction mixture was heated to 55 C. for 19 hours, then the solvent was evaporated under reduced pressure. The residue was added with methylene chloride and water. The phases were separated and the organic one was washed with water, anhydrified over Na2SO4 and the solvent evaporated under reduced pressure. The residue was dissolved in dimethylsulfoxide (13 ml) and methanol (5 ml) and the solution was added, under N2 at room temperature, with triethylamine (1.1 ml, 7.87 mmoles), palladium acetate (53 mg; 0.236 mmole) and 1,3-bisdiphenylphosphinopropane (97 mg; 0.236 mmole). The reaction mixture was then heated to 70 C. under CO pressure (9 bar) for 90 hours during which further palladium acetate (18 mg, 0.080 mmole) and 1,3-bisdiphenylphosphinopropane (33 mg, 0.080 mmole) were added in one portion. After cooling to room temperature the mixture was poured into water and methylene chloride. The phases were separated and the organic one was washed with water, anhydrified over Na2SO4 and evaporated to dryness under reduced pressure. The resulting crude was purified by silica gel chromatography (eluent: petrolatum:ethyl acetate=90:10). There was obtained 1.08 g of (S)-N-(tert.butoxycarbonyl)-N-propyl-6-methoxy-5-methoxycarbonyl-1,2,3,4-tetrahydro-2-naphthylamine. 1H-NMR (200 MHz, CDCl3) delta (ppm): 0.86 (t, 3H), 1.44 (t, 9H); 1.46-2.00 (m, 4H); 2.71-3.13 (m, 6H); 3.78 (s, 3H); 3.89 (s, 3H), 3.90-4.27 (m, 1H); 6.71 (d, 1H); 7.03 (d, 1H). Mass (electronic impact): 377 (M)+

The synthetic route of 456-64-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Zambon Group S.p.A.; US6232348; (2001); B1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Related Products of 60144-53-8, The chemical industry reduces the impact on the environment during synthesis 60144-53-8, name is tert-Butyl (4-fluorophenyl)carbamate, I believe this compound will play a more active role in future production and life.

To a solution of (4-fluorophenyl)-carbamic acid te/f-butyl ester (1.3 g, 6.2 mmol) in anhydrous tetrahydrofuran (15 mL) was added sodium hydride (60% dispersion in mineral oil, 261 mg, 6.8 mmol). After the initial gas evolution had ceased, the reaction was allowed to stir for 15 minutes. Tetra-n-butylammonium iodide (227 mg, 0.6 mmol) was then added followed by addition of 2-chloro-5-chloromethyl thiazole prepared above. The mixture was heated to reflux for 1 hour. After cooling, the reaction was carefully neutralized with cold saturated sodium bicarbonate (10 mL) and extracted with ethyl acetate (2 x 20 ml_). The organic layers were combined, dried over anhydrous sodium sulfate, filtered and the solvent removed under reduced pressure to provide a dark oil. Flash chromatography (silica gel; 5%-10% ethyl acetate in hexanes) provided (2-chloro-thiazol-5-ylmethyl)-(4-fluorophenyl)-carbamic acid terf-butyl ester as a yellow oil (1.5 g, 4.4 mmol).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, tert-Butyl (4-fluorophenyl)carbamate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; WYETH; WO2008/73461; (2008); A2;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 894852-01-8, name is 7-Bromo-2,2-dimethyl-2H-pyrido[3,2-b][1,4]oxazin-3(4H)-one, A new synthetic method of this compound is introduced below., name: 7-Bromo-2,2-dimethyl-2H-pyrido[3,2-b][1,4]oxazin-3(4H)-one

b) (E)-3 -(2,2-Dimethyl-3 -oxo-3 ,4-dihydro-2H-pyrido[3,2-&] [ 1 ,4]oxazin-7-yl)-iV-methyl-N- (3-methylbenzofuran-2-yhnethyl)acrylamide; A solution of N-methyl-N-(3-methylbenzofuran-2-yhnethyl)acrylamide (0.231 g,1.01 mmol) in propionitrile (4 mL) and DMF (0.8 mL) was deoxygenated with Ar for 20 min. The solution was treated with diisopropylethylamine (0.28 mL, 1.64 mmol) and 7- bromo-2,2-dimethyl-4H-rhoyrido[3,2-][l,4]oxazin-3-one (0.200 g, 0.775 mmol). The solution was deoxygenated with Ar for 20 min. Pd(OAc)2 (0.017 g, 0.078 mmol) and P(o- tol)3 (0.047 g, 0.15 mmol) were then added and the solution was deoxygenated again with Ar for 10 min. The mixture was heated to reflux for 18 h, then allowed to cool. The mixture was diluted with H2O (100 mL). The resulting solids were collected by filtration and washed with Et2O (50 mL). Residual palladium was removed by silica gel plug (silica gel, 95:5, CH2Cl2/Me0H) the resulting solution concentrated to reveal a light orange solid. The solid was triturated with Et2O and dried to give the title compound (0.14 g, 46%) as a light pink solid and as a mixture of amide rotamers: 1H NMR (300 MHz, DMSO-JPatent; AFFINIUM PHARMACEUTICALS, INC.; WO2007/53131; (2007); A2;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Reference of 1386861-46-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1386861-46-6, name is 2-Chloro-6-methyl-N-phenylbenzamide belongs to amides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

Under an inert atmosphere, to a mixture of Example 2b (13.7 g, 55.9 mmol) in THF (100 mL) was added n-BuLi (2.5 mol/L, 44.7 mL, 111.8 mmoL) dropwise over 30 mm at -30C, which was stirred at room temperature for 1 hour. The resulting solution was used for next step directly. To a solution of Example 2c (cas: 87694-49-3, 19.5 g, 83.9 mmol) in THF (100 mL) was added i-PrMgC1 (1 mol/L, 92.2 mL, 92.2 mmol) dropwise over 30 mm. The reaction mixture was stirred at -3 0C for 1 hour, which was then added to the above mixture dropwise at -3 0C. The resulted solution was stirred at -15C for 3 hours, and then quenched with water (120 mL), followed by addition of EtOAc (300 mL). The organic layer was washed with NH4C1 (sat.), and brine, and concentrated in vacuo to give yellowish oil, which was used for next step directly without further purification. To the solution of above yellowish oil in methanol (90 mL) was added concentrated HC1 (90 mL) at room temperature. The resulting solution was stirred at 95C for 16 hours and then cooled to room temperature. The mixture was washed with brine, and concentrated in vacuo. The residue was extracted with EtOAc, and the organic layers were basified with NaHCO3 powder to pH = 8.5, and then extracted with DCM. The combined organic phases were washed with brine, concentrated and the residue was purified by silica gel chromatography (DCM/MeOH = 10/1) to give the desired product Example 2d (8.0 g, yield 48%) as a light yellow solid.?HNMR (400 MHz, Chloroform-d) 7.47 (m, 6H), 7.26 (d, J= 6.7 Hz, 2H), 6.70 (s, 1H), 3.70 (q, J 6.5 Hz, 1H), 1.25 (d, J 6.5 Hz, 3H).

The synthetic route of 2-Chloro-6-methyl-N-phenylbenzamide has been constantly updated, and we look forward to future research findings.

Reference:
Patent; FRONTHERA U.S. PHARMACEUTICALS LLC; JIN, Bohan; DONG, Qing; HUNG, Gene; (106 pag.)WO2019/28395; (2019); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics