Tag: M.W=200-300

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 162787-61-3, name is 2-(Methylsulfonamido)benzoic acid, A new synthetic method of this compound is introduced below., Safety of 2-(Methylsulfonamido)benzoic acid

In a separate reaction vessel, O-Benzoic acid methanesulfamide(0.039g, 0.183 mmol),HATU(0.1 16g, 0.305 mmol), and pyridine(29ul, 0.366 mmol), were dissolved in anhydrous DMF (5 ml). The reaction mixture was stirred under nitrogen for 2 hours to activate the acid. When activation was approximately 80% complete by LC/MS (2 hr) the piperidine solution in DMF (0.028g, 0.121 mmol), along with DIPEA (86ul, 0.488mmol) were added. The reaction was stirred overnight while monitoring by LC/MS. Solvents were removed by rotary evaporation. The residue was taken up in DCM (100 ml)and washed with water (5 x 100 ml). The organic layer was collected, dried over MgS04, filtered and evaporated. The residue was taken up in DCM and columned on silica gel using a gradient of 0 to 10% MeOH to provide compound 18 : DCM. (Yield- 32.45 mg, 0.076 mmol, 62 %).1H-NMR (CD3CN, 300 MuEtazeta):delta 1.50 (m, 2H), 1.74 (m, 1H), 2.20 (bs, 1H), 2.31 (s, 3H), 2.43 (s, 1H), 2.99 (s, 3H), 3.10 (m, 1H), 3.35 (m, 1H), 6.22-6.46 (m, 1H), 7.25-7.70 (m, 4H), 8.80- 9.00 (m, 1H).

The synthetic route of 162787-61-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; GILEAD SCIENCES, INC.; BABAOGLU, Kerim; BOOJAMRA, Constantine, G.; EISENBERG, Eugene, J.; HUI, Hon Chung; MACKMAN, Richard, L.; PARRISH, Jay, P.; SANGI, Michael; SAUNDERS, Oliver, L.; SIEGEL, Dustin; SPERANDIO, David; YANG, Hai; WO2011/163518; (2011); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Related Products of 4943-86-6, These common heterocyclic compound, 4943-86-6, name is 2-Amino-N-(4-chlorophenyl)benzamide, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A solution of the substituted benzamide (1equiv) and ortho-bromobenzaldehyde(1.41 mmol, 1 equiv) in acetonitrile (5mL) was treated with cyanuric chloride(0.022 mmol, 10 mole %). The reaction mixture was stirred at room temperature for 5-10 min and formed precipitate was filtered and recrystallised with ethanol to obtain the compounds 1, 6a, 6b and 16.

Statistics shows that 2-Amino-N-(4-chlorophenyl)benzamide is playing an increasingly important role. we look forward to future research findings about 4943-86-6.

Reference:
Article; Sharma, Moni; Mahar, Rohit; Shukla, Sanjeev K.; Kant, Ruchir; Chauhan, Prem M.S.; Tetrahedron Letters; vol. 54; 46; (2013); p. 6171 – 6177;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Related Products of 53844-02-3,Some common heterocyclic compound, 53844-02-3, name is Benzyl (2-bromoethyl)carbamate, molecular formula is C10H12BrNO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Treat a -78 C solution of diisopropylamine (35 g, 0.346 mol) in THF (300 mL), under N2, drop-wise with a solution of n-butyllithium (2.5 M, 127 mL, 0.317 mol), warm to -30 C for 0.5 h, re-cool to -78C and treat drop-wise with a solution of isobutyronitrile (19.9 g, 0.288 mol) in THF (100 mL). Stir the mixture at -78C for 0.5 h, treat with a solution of benzyl (2-bromoethyl)carbamate (74 g, 0.288 mol) in THF (100 mL), stir at – 78C for 1 h, then warm to RT and stir overnight. Treat the mixture with H20, separate the layers, extract the aqueous layer with EtOAc, wash the combined organics with brine, dry over Na2S04, concentrate to dryness and purify via silica gel chromatography (EtOAc/Petroleum ether) to afford the title compound (15 g, 21 % yield). MS (m/z): 247.2 (M+l).

The synthetic route of 53844-02-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; DECIPHERA PHARMACEUTICALS, LLC; ELI LILLY AND COMPANY; FLYNN, Daniel L.; KAUFMAN, Michael D.; VOGETI, Lakshminarayana; WISE, Scott C.; LU, Wei-Ping; SMITH, Bryan D.; CALDWELL, Timothy M.; PATT, William C.; HENRY, James Robert; HIPSKIND, Philip Arthur; PENG, Sheng-Bin; WO2013/134298; (2013); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 2886-65-9, name is 7-Chloro-5-(2-fluorophenyl)-1H-benzo[e][1,4]diazepin-2(3H)-one belongs to amides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. Application In Synthesis of 7-Chloro-5-(2-fluorophenyl)-1H-benzo[e][1,4]diazepin-2(3H)-one

EXAMPLE 3 Preparation of 10-chloro-11b-(2-fluorophenyl)-2,3,5,11b-tetrahydrooxazolo[3,2-d] [1,4]benzodiazepin-6-(7H)-one SPC17 To 15 g. (51.9 mmole) of 7-chloro-5-(2-fluorophenyl)-1,3-dihydro-2H-1,4-benzodiazepin-2-one in 150 ml. of dry benzene, 9 g. (67.7 mmole) of aluminum chloride was added and stirring was continued 15 minutes. The reaction mixture was cooled in an ice bath and 8.8 g. (0.2 mole) of ethylene oxide was added dropwise. After 18 hours of stirring at room temperature, the reaction mixture was heated to 40 for 1 hour and then cooled to room temperature and treated with 5 g. (37.6 mmole) of aluminum chloride, followed by 4.4 g. (0.1 mole) of ethylene oxide. The reaction mixture was heated 4 hours at 45-50 and then evaporated to dryness. ethylene chloride, ice and ammonium hydroxide were added and the solid removed by filtration. The filtrate was separated and the organic phase reduced to dryness in vacuo. The residue was dissolved in dilute hydrochloric acid and the pH of the solution adjusted to 5 with ammonium hydroxide. The acidic solution was washed with ether, made basic and extracted with methylene chloride. The organic phase was washed with brine, dried and evaporated to dryness. Recrystallization from methylene chloride-hexane gave the above-titled product as colorless rods, m.p. 183-184.

The synthetic route of 2886-65-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Hoffmann-La Roche Inc.; US3965151; (1976); A;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 27466-83-7, name is 4-Bromo-N-methylbenzamide, belongs to amides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 27466-83-7, Safety of 4-Bromo-N-methylbenzamide

General procedure: To a dried screw-capped vial were added benzamide 2 (0.10mmol), ethyl acrylate 3 (0.15mmol), 1b (4.8mg, 0.01mmol), AgSbF6 (6.8mg, 0.02mmol), AgOAc (41.7mg, 0.25mmol), and 1,2-dichloroethane (1.0mL) under Ar atmosphere. The vial was capped and the mixture was heated at 60C for 13h with stirring. After the mixture was cooled to room temperature, saturated EDTA·2Na aqwas added following dilution with CH2Cl2. Organic layer was separated and aqueous layer was extracted with CH2Cl2 (×2). Combined organic layers were dried over Na2SO4. After filtration and evaporation, obtained crude mixture was purified by silica gel column chromatography (CH2Cl2/EtOAc) to give product3.4.1.1 _4.1.5 (E)-Ethyl 3-(5-bromo-2-(methylcarbamoyl)phenyl)acrylate (4e) A colorless solid; IR (KBr) nu 3079, 2975, 2935, 1719, 1642, 1561, 1316, 1190, 1032, 979, 862 cm-1; 1H NMR (CDCl3, 400 MHz) delta 1.32 (t, J=7.5 Hz, 3H), 3.00 (d, J=5.2 Hz, 3H), 4.23 (q, J=7.5 Hz, 2H), 5.88 (br s, 1H), 6.36 (d, J=16.0 Hz, 1H), 7.34 (d, J=8.6 Hz, 1H), 7.49 (d, J=8.6 Hz, 1H), 7.74 (s, 1H), 7.90 (d, J=16.0 Hz, 1H); 13C NMR (CDCl3, 100 MHz) delta 14.4, 27.1, 60.1, 122.1, 124.1, 124.7, 129.3, 130.1, 132.7, 134.9, 135.8, 140.5, 166.2, 168.5; HRMS (ESI): m/z calculated for [M+Na]+: 334.0049, found: 334.0050.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Suzuki, Yudai; Sun, Bo; Yoshino, Tatsuhiko; Kanai, Motomu; Matsunaga, Shigeki; Tetrahedron; vol. 71; 26-27; (2015); p. 4552 – 4556;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 94838-59-2, name is tert-Butyl 4-aminophenethylcarbamate, belongs to amides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 94838-59-2, Recommanded Product: tert-Butyl 4-aminophenethylcarbamate

Tert-butyl (4-aminophenethyl)carbamate (4.5 g, 21.83 mmol, 1.0 eq) was dissolved in DCM (150 mL) and cooled to 0C using an ice bath. DMAP (1.6 eq) was added in one portion to the stirring mixture followed by dropwise addition of bromoacetyl bromide (1.2 eq) in 50 mL DCM. The mixture was stirred for 30 minutes at 0C and then 1.5 hours at room temperature before it was concentrated in vacuo. The crude material was purified using column chromatography on Si02 with 75-100% EtOAc in heptane as eluent. This gave a colorless solid which was used directly in the next example.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; UNIVERSITETET I OSLO; GOLDING, Louise; RONGVED, Pal; ASTRAND, Ove Alexander H°gmoen; SAMUELSEN, Ørjan; SCHNAARS, Christian; KILDAHL-ANDERSEN, Geir; (234 pag.)WO2018/33719; (2018); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Synthetic Route of 24036-52-0,Some common heterocyclic compound, 24036-52-0, name is 6-Bromo-2H-1,4-benzoxazin-3(4H)-one, molecular formula is C8H6BrNO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Toluene (4.5mL) was added to a flask containing 6-bromo-3,4-dihydroquinolin-2(1H)-one (300mg, 1.33mmol), 3-(trifluoromethoxy)aniline (231muL, 1.73mmol), Pd2(dba)3 (15.2mg, 0.02mmol), 2-dicyclohexylphosphino-2?,4?,6?-triisopropylbiphenyl (31.6mg, 0.07mmol) and NaOt-Bu (192mg, 2.00mmol) under an argon atmosphere. The mixture was stirred at 100C for 9h. After cooling, the reaction mixture was diluted with EtOAc, and filtered through a pad of Celite. The filtrate was concentrated in vacuo. Crude material was purified by flash chromatography with n-hexane/EtOAc (2:3) to afford the desired diaryl amine 11i

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 6-Bromo-2H-1,4-benzoxazin-3(4H)-one, its application will become more common.

Reference:
Article; Takeuchi, Tomoki; Oishi, Shinya; Kaneda, Masato; Misu, Ryosuke; Ohno, Hiroaki; Sawada, Jun-Ichi; Asai, Akira; Nakamura, Shinya; Nakanishi, Isao; Fujii, Nobutaka; Bioorganic and Medicinal Chemistry; vol. 22; 12; (2014); p. 3171 – 3179;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

These common heterocyclic compound, 144-80-9, name is N-((4-Aminophenyl)sulfonyl)acetamide, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 144-80-9

The Schiff base HL1 was synthesized with a method differentfrom the one in the literature [24], by refluxing sulfacetamide(1 mmol, 0.214 g) and salicylaldehyde (1 mmol, 0.122 g) in about15 ml of methanol for 3 h at ca.70 C, in the presence of 4-5 dropsof conc. H2SO4. The solid product was collected through filtrationand finally air dried. Yield: 58%. M.P. = 215 C. Anal. Calcd. forC15H14N2O4S (%):C, 56.59; H, 4.43; N, 8.80. Found: C, 56.42; H,4.25; N, 8.75. FT-IR (KBr, cm1): mmax cm1 (KBr):1645 (s, CN),1715 (CO), 1575, 1616 (CCaromatic), 1093, 1157 (SO2) 3340(NAH). UV-vis: kmax (nm) (e, M1 cm1) (DMSO-d6): 350(40,000), 320 (41,000). 1H NMR (DMSO-d6, 400 MHz):6-8 (m, 8H), 9 (s, 1H), 10 (s, 1H), 3 (s, 3H), 11 (s, 1H).

The synthetic route of N-((4-Aminophenyl)sulfonyl)acetamide has been constantly updated, and we look forward to future research findings.

Reference:
Article; Salehi, Mehdi; Ghasemi, Fateme; Kubicki, Maciej; Asadi, Asadollah; Behzad, Mahdi; Ghasemi, Mohammad Hadi; Gholizadeh, Ahmad; Inorganica Chimica Acta; vol. 453; (2016); p. 238 – 246;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

One of the major reasons for studying chemical kinetics is to use measurements of the macroscopic properties of a system, such as the rate of change in the concentration of reactants or products with time. 53075-09-5, Name is N,N,N-Trimethyladamantan-1-aminium hydroxide, formurla is C13H25NO. In a document, author is Gorman, Ryan M., introducing its new discovery. Safety of N,N,N-Trimethyladamantan-1-aminium hydroxide.

East Java Province is one of main producers of cabya (Piper retrofractum Vahl) fruit in Indonesia. The fruit has huge utilizations and economic potential, but lack in postharvest process investigation. Traditional open sun drying by farmers has deficiency, e.g. unpredictable weather and longer process. In the present study, the indirect forced convection solar dryer was used to dehydrate the cabya fruit as affected by hot water blanching. The drying behavior, drying kinetics model and shrinkage of the fruit were evaluated. One kilogram of cabya fruit at the red edible maturity stage with 70.29 +/- 2.89% (wb) of average moisture content was used as raw material for each with and without hot water blanching. Two units of forced convective solar dryers with identical specification consisting of solar air collector and drying cabinet were employed in parallel for 18 h in 3 days. The obtained drying data were fitted to 12 mathematical drying kinetics models. The moisture content of cabya fruit with and without hot water blanching was reduced to the final moisture content of 6% (wb) and 9% (wb), respectively. Among examined models, The Page model satisfactorily described cabya fruit drying kinetics. The results also indicated that hot water blanching affected significantly the drying behavior of cabya fruit. Significant shrinkage was also found in the final dried product of cabya fruit.

I hope this article can help some friends in scientific research. I am very proud of our efforts over the past few months and hope to 53075-09-5 help many people in the next few years. Safety of N,N,N-Trimethyladamantan-1-aminium hydroxide.

Reference:
Amide – Wikipedia,
,Amide – an overview | ScienceDirect Topics

A catalyst don’t appear in the overall stoichiometry of the reaction it catalyzes, SDS of cas: 6292-59-7, but it must appear in at least one of the elementary reactions in the mechanism for the catalyzed reaction. 6292-59-7, Name is 4-(tert-Butyl)benzenesulfonamide, molecular formula is C10H15NO2S. In an article, author is Guo, Xuliang,once mentioned of 6292-59-7.

The first total synthesis of chondrochloren A is accomplished using a 1,2-metallate rearrangement addition as an alternative for the Nozaki-Hiyama-Kishi reaction. This transformation also avoids the inherent challenges of this polyketide segment and provides a new, unprecedented strategy to assemble polyketidal frameworks. The formation of the Z-enamide is accomplished using a Z-selective cross coupling of the corresponding amide to a Z-vinyl bromide.

If you’re interested in learning more about 6292-59-7. The above is the message from the blog manager. SDS of cas: 6292-59-7.

Reference:
Amide – Wikipedia,
,Amide – an overview | ScienceDirect Topics